Skip to contentSkip to conversation

Patch "iio: st_pressure: Fix data sign" has been added to the 4.9-stable tree

PATCH [email protected] 1 participant 1 message Jun 18, 2017

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

iio: st_pressure: Fix data sign

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
iio-st_pressure-fix-data-sign.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 1b211d48abaa0e12e6e6177c0316ff55d11fdfce Mon Sep 17 00:00:00 2001

From: Marcin Niestroj <[email protected]>
Date: Mon, 12 Dec 2016 17:58:42 +0100
Subject: iio: st_pressure: Fix data sign

From: Marcin Niestroj <[email protected]>

commit 1b211d48abaa0e12e6e6177c0316ff55d11fdfce upstream.

Datasheet of each device (lps331ap, lps25h, lps001wp, lps22hb) says that the pressure and temperature data is a 2's complement.

I'm sending this the slow way, as negative pressures on these are pretty unusual and the nature of the fixing of multiple device introduction patches will make it hard to apply to older kernels - Jonathan.

Fixes 217494e5b780 ("iio:pressure: Add STMicroelectronics pressures driver")
Fixes 2f5effcbd097 ("iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor")
Fixes 7885a8ce6800 ("iio: pressure: st: Add support for new LPS001WP pressure sensor")
Fixes e039e2f5b4da ("iio:st_pressure:initial lps22hb sensor support")
---
 drivers/iio/pressure/st_pressure_core.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/iio/pressure/st_pressure_core.c +5 -5
@@ -227,7 +227,7 @@ static const struct iio_chan_spec st_pre
 		.address = ST_PRESS_1_OUT_XL_ADDR,
 		.scan_index = 0,
 		.scan_type = {
-			.sign = 'u',
+			.sign = 's',
 			.realbits = 24,
 			.storagebits = 32,
 			.endianness = IIO_LE,
@@ -240,7 +240,7 @@ static const struct iio_chan_spec st_pre
 		.address = ST_TEMP_1_OUT_L_ADDR,
 		.scan_index = 1,
 		.scan_type = {
-			.sign = 'u',
+			.sign = 's',
 			.realbits = 16,
 			.storagebits = 16,
 			.endianness = IIO_LE,
@@ -259,7 +259,7 @@ static const struct iio_chan_spec st_pre
 		.address = ST_PRESS_LPS001WP_OUT_L_ADDR,
 		.scan_index = 0,
 		.scan_type = {
-			.sign = 'u',
+			.sign = 's',
 			.realbits = 16,
 			.storagebits = 16,
 			.endianness = IIO_LE,
@@ -273,7 +273,7 @@ static const struct iio_chan_spec st_pre
 		.address = ST_TEMP_LPS001WP_OUT_L_ADDR,
 		.scan_index = 1,
 		.scan_type = {
-			.sign = 'u',
+			.sign = 's',
 			.realbits = 16,
 			.storagebits = 16,
 			.endianness = IIO_LE,
@@ -291,7 +291,7 @@ static const struct iio_chan_spec st_pre
 		.address = ST_PRESS_1_OUT_XL_ADDR,
 		.scan_index = 0,
 		.scan_type = {
-			.sign = 'u',
+			.sign = 's',
 			.realbits = 24,
 			.storagebits = 32,
 			.endianness = IIO_LE,

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/iio-st_pressure-fix-data-sign.patch