Board: Add Bananapi M64 support
PATCH v2 1/3 Board: Add Bananapi M64 support
From: Jagan Teki <[email protected]>
Add initial support for bananapi M64 board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
---
Changes for v2:
- none
DEVELOPERS | 2 ++ board/bananapi/bananapi-m64/boot.cmd | 6 +++++ board/bananapi/bananapi-m64/genimage.cfg | 38 +++++++++++++++++++++++++++ board/bananapi/bananapi-m64/readme.txt | 34 ++++++++++++++++++++++++ board/bananapi/post-build.sh | 10 +++++++ configs/bananapi_m64_defconfig | 45 ++++++++++++++++++++++++++++++++ 6 files changed, 135 insertions(+) create mode 100644 board/bananapi/bananapi-m64/boot.cmd create mode 100644 board/bananapi/bananapi-m64/genimage.cfg create mode 100644 board/bananapi/bananapi-m64/readme.txt create mode 100755 board/bananapi/post-build.sh create mode 100644 configs/bananapi_m64_defconfig
DEVELOPERS +2 -0
@@ -828,7 +828,9 @@ N: Ilias Apalodimas <[email protected]> F: package/keepalived/ N: Jagan Teki <[email protected]> +F: board/bananapi/ F: board/engicam/ +F: configs/bananapi_m64_defconfig F: configs/engicam_imx6qdl_icore_mmc_defconfig F: configs/engicam_imx6qdl_icore_rqs_mmc_defconfig F: configs/engicam_imx6ul_geam_mmc_defconfig
board/bananapi/bananapi-m64/boot.cmd new file +6 -0
@@ -0,0 +1,6 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r Image +fatload mmc 0 $fdt_addr_r sun50i-a64-bananapi-m64.dtb + +booti $kernel_addr_r - $fdt_addr_r
board/bananapi/bananapi-m64/genimage.cfg new file +38 -0
@@ -0,0 +1,38 @@ +image boot.vfat { + vfat { + files = { + "Image", + "sun50i-a64-bananapi-m64.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition spl { + in-partition-table = "no" + image = "sunxi-spl.bin" + offset = 8192 + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.itb" + offset = 40K + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/bananapi/bananapi-m64/readme.txt new file +34 -0
@@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Bananapi M64. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Bananapi M64 link: +http://www.banana-pi.org/m64.html + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make bananapi_m64_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M + $ sudo sync + +Insert the micro SDcard in your Bananapi M64 and power it up. The console +is on the serial line, 115200 8N1.
board/bananapi/post-build.sh new file +10 -0
@@ -0,0 +1,10 @@ +#!/bin/sh +# args from BR2_ROOTFS_POST_SCRIPT_ARGS +# $4 path of boot.cmd + +MKIMAGE=${HOST_DIR}/usr/bin/mkimage +BOOT_CMD="${4}" +BOOT_CMD_H="${BINARIES_DIR}/boot.scr" + +# U-Boot script +"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}"
configs/bananapi_m64_defconfig new file +45 -0
45 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 2/3 Board: Add Bananapi M2 Plus support
From: Jagan Teki <[email protected]>
Add initial support for bananapi M2 Plus board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
---
Changes for v2:
- Remove BR2_aarch64=y
DEVELOPERS | 1 + board/bananapi/bananapi-m2-plus/boot.cmd | 7 ++++++ board/bananapi/bananapi-m2-plus/genimage.cfg | 33 ++++++++++++++++++++++++++ board/bananapi/bananapi-m2-plus/readme.txt | 34 +++++++++++++++++++++++++++ configs/bananapi_m2_plus_defconfig | 35 ++++++++++++++++++++++++++++ 5 files changed, 110 insertions(+) create mode 100644 board/bananapi/bananapi-m2-plus/boot.cmd create mode 100644 board/bananapi/bananapi-m2-plus/genimage.cfg create mode 100644 board/bananapi/bananapi-m2-plus/readme.txt create mode 100644 configs/bananapi_m2_plus_defconfig
DEVELOPERS +1 -0
@@ -830,6 +830,7 @@ F: package/keepalived/ N: Jagan Teki <[email protected]> F: board/bananapi/ F: board/engicam/ +F: configs/bananapi_m2_plus_defconfig F: configs/bananapi_m64_defconfig F: configs/engicam_imx6qdl_icore_mmc_defconfig F: configs/engicam_imx6qdl_icore_rqs_mmc_defconfig
board/bananapi/bananapi-m2-plus/boot.cmd new file +7 -0
@@ -0,0 +1,7 @@ +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +mmc dev 0 +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h3-bananapi-m2-plus.dtb + +bootz $kernel_addr_r - $fdt_addr_r
board/bananapi/bananapi-m2-plus/genimage.cfg new file +33 -0
@@ -0,0 +1,33 @@ +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h3-bananapi-m2-plus.dtb", + "boot.scr" + } + } + size = 64M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/bananapi/bananapi-m2-plus/readme.txt new file +34 -0
@@ -0,0 +1,34 @@ +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the Bananapi M2 Plus. With the current configuration +it will bring-up the board, and allow access through the serial console. + +Bananapi M2 Plus link: +http://www.banana-pi.org/m2plus.html + +This configuration uses U-Boot mainline and kernel mainline. + +How to build +============ + + $ make bananapi_m2_plus_defconfig + $ make + +Note: you will need access to the internet to download the required +sources. + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M + $ sudo sync + +Insert the micro SDcard in your Bananapi M2 Plus and power it up. The console +is on the serial line, 115200 8N1.
configs/bananapi_m2_plus_defconfig new file +35 -0
@@ -0,0 +1,35 @@ +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_EABIHF=y + +# Linux headers same as kernel, a 4.11 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="Sinovoip_BPI_M2_Plus" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5" +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-bananapi-m2-plus" + +# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Plus" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bananapi/post-build.sh" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m2-plus/genimage.cfg board/bananapi/bananapi-m2-plus/boot.cmd"
Signature · 1 line
2.7.4
PATCH v2 1/3 Board: Add Bananapi M64 support
In reply to Jagan TekiHello,
Quoted 6 lines · Jagan Teki
DEVELOPERS | 2 ++ board/bananapi/bananapi-m64/boot.cmd | 6 +++++ board/bananapi/bananapi-m64/genimage.cfg | 38 +++++++++++++++++++++++++++ board/bananapi/bananapi-m64/readme.txt | 34 ++++++++++++++++++++++++ board/bananapi/post-build.sh | 10 +++++++ configs/bananapi_m64_defconfig | 45 ++++++++++++++++++++++++++++++++
Please update the .gitlab-ci.yml at the same time.
Quoted 6 lines
board/bananapi/post-build.sh new file +0
-0
board/bananapi/post-build.sh line 10
Quoted 10 lines
board/bananapi/post-build.sh new file +10
-0@@ -0,0 +1,10 @@ +#!/bin/sh +# args from BR2_ROOTFS_POST_SCRIPT_ARGS +# $4 path of boot.cmd + +MKIMAGE=${HOST_DIR}/usr/bin/mkimage +BOOT_CMD="${4}" +BOOT_CMD_H="${BINARIES_DIR}/boot.scr" + +# U-Boot script +"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}"
Please drop this post-build script, and instead use the newly introduced BR2_TARGET_UBOOT_BOOT_SCRIPT option. See
https://git.buildroot.org/buildroot/commit/?id=c40e673c5c8f580bb6066c5dcf69aea3c4d9de63.
configs/bananapi_m64_defconfig line 4
Quoted 10 lines
configs/bananapi_m64_defconfig new file +4
-0@@ -0,0 +1,45 @@ +BR2_aarch64=y +BR2_cortex_a53=y +BR2_ARM_FPU_VFPV4=y +BR2_TOOLCHAIN_BUILDROOT_CXX=y
Please drop this line, there is no need to enable C++ support.
configs/bananapi_m64_defconfig line 14
Quoted 6 lines
configs/bananapi_m64_defconfig new file +6
-0+# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="allwinner"
This version is a branch, which is not good. Please use either a tag, or a full commit hash.
configs/bananapi_m64_defconfig line 41
Quoted 5 lines
configs/bananapi_m64_defconfig new file +5
-0+# Filesystem +BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M64" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_GENIMAGE=y
Please add HOST_DOSFSTOOLS and HOST_MTOOLS, since you're generating a VFAT filesystem.
configs/bananapi_m64_defconfig line 43
Quoted 2 lines
configs/bananapi_m64_defconfig new file +2
-0+BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_BUILD_SCRIPT="board/bananapi/post-build.sh"
Those two lines can be dropped when you switch toBR2_TARGET_UBOOT_BOOT_SCRIPT.
configs/bananapi_m64_defconfig line 45
Quoted 2 lines
configs/bananapi_m64_defconfig new file +2
-0+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m64/genimage.cfg board/bananapi/bananapi-m64/boot.cmd"
The last argument here can be dropped when you switch to BR2_TARGET_UBOOT_BOOT_SCRIPT.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
PATCH v2 2/3 Board: Add Bananapi M2 Plus support
In reply to Jagan TekiHello,
Quoted 8 lines · Jagan Teki
From: Jagan Teki <[email protected]>
Add initial support for bananapi M2 Plus board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildrootSigned-off-by Jagan Teki <[email protected]>
Essentially same comment as for the Bananapi M64. Also, please use "board: " instead of "Board: " in the title.
Main comments:
- .gitlab-ci.yml change needed
- use BR2_TARGET_UBOOT_BOOT_SCRIPT
- don't forget host-dosfstools and host-mtools if you're generating a VFAT filesystem
Thanks,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com