board: add orangepi-plus support
PATCH v2 1/1 board: add orangepi-plus support
Add initial support for orangepi-plus board
with below features
- U-Boot 2017.05
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by Chakra Divi <[email protected]>
---
Changes for v2:
- Modified defconfig to use BR2_TARGET_UBOOT_BOOT_SCRIPT
- Deleted post-build.sh
.gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/orangepi/orangepi-plus/boot.cmd | 8 ++++++ board/orangepi/orangepi-plus/genimage.cfg | 35 +++++++++++++++++++++++ board/orangepi/orangepi-plus/readme.txt | 29 +++++++++++++++++++ configs/orangepi_plus_defconfig | 43 +++++++++++++++++++++++++++++ 6 files changed, 118 insertions(+) create mode 100644 board/orangepi/orangepi-plus/boot.cmd create mode 100644 board/orangepi/orangepi-plus/genimage.cfg create mode 100644 board/orangepi/orangepi-plus/readme.txt create mode 100644 configs/orangepi_plus_defconfig
.gitlab-ci.yml +1 -0
@@ -139,6 +139,7 @@ olimex_imx233_olinuxino_defconfig: *defconfig openblocks_a6_defconfig: *defconfig orangepi_one_defconfig: *defconfig orangepi_pc_defconfig: *defconfig +orangepi_plus_defconfig: *defconfig orangepi_zero_defconfig: *defconfig pandaboard_defconfig: *defconfig pc_x86_64_bios_defconfig: *defconfig
DEVELOPERS +2 -0
@@ -340,7 +340,9 @@ F: package/libsvg-cairo/ N: Chakra Divi <[email protected]> F: board/olimex/a13_olinuxino +F: board/orangepi/orangepi-plus F: configs/olimex_a13_olinuxino_defconfig +F: configs/orangepi_plus_defconfig N: Chris Packham <[email protected]> F: package/eventlog/
board/orangepi/orangepi-plus/boot.cmd new file +8 -0
@@ -0,0 +1,8 @@ +setenv fdt_high ffffffff + +setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait + +fatload mmc 0 $kernel_addr_r zImage +fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-plus.dtb + +bootz $kernel_addr_r - $fdt_addr_r
board/orangepi/orangepi-plus/genimage.cfg new file +35 -0
@@ -0,0 +1,35 @@ +# Minimal SD card image for the OrangePi Plus\Plus2 +# +image boot.vfat { + vfat { + files = { + "zImage", + "sun8i-h3-orangepi-plus.dtb", + "boot.scr" + } + } + size = 10M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot-sunxi-with-spl.bin" + offset = 8192 + size = 1040384 # 1MB - 8192 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/orangepi/orangepi-plus/readme.txt new file +29 -0
@@ -0,0 +1,29 @@ +OrangePi Plus/Plus2 + +Intro +===== + +This default configuration will allow you to start experimenting with the +buildroot environment for the OrangePi Plus/Plus2. With the current configuration +it will bring-up the board, and allow access through the serial console. + +How to build it +=============== + +Configure Buildroot: + + $ make orangepi_plus_defconfig + +Compile everything and build the SD card image: + + $ make + +How to write the SD card +======================== + +Once the build process is finished you will have an image called "sdcard.img" +in the output/images/ directory. + +Copy the bootable "sdcard.img" onto an SD card with "dd": + + $ sudo dd if=output/images/sdcard.img of=/dev/sdX
configs/orangepi_plus_defconfig new file +43 -0
43 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v2 1/1 board: add orangepi-plus support
Hello,
board/orangepi/orangepi-plus/readme.txt line 15
Quoted 10 lines · Chakra Divi
board/orangepi/orangepi-plus/readme.txt new file +10
-0+This default configuration will allow you to start experimenting with the +buildroot environment for the OrangePi Plus/Plus2. With the current configuration +it will bring-up the board, and allow access through the serial console. + +How to build it +=============== + +Configure Buildroot: + + $ make orangepi_plus_defconfig
There was a trailing whitespace here.
configs/orangepi_plus_defconfig line 43
Quoted 10 lines
configs/orangepi_plus_defconfig new file +10
-0+BR2_TARGET_UBOOT_BOOT_SCRIPT=y +BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-plus/boot.cmd" +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-plus/genimage.cfg" + +# Additional tools +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Since you use BR2_TARGET_UBOOT_BOOT_SCRIPT, BR2_PACKAGE_HOST_UBOOT_TOOLS=y is no longer needed, so I dropped it.
Applied with those changes. Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com