Help needed for solving a few issues with building git
Hello all,
Building without localization support
------------------------------------
I tried to build git from source without localization support by adding the following line to the Makefile,
NO_GETTEXT=1
It doesn't seem to be working for reasons I'm unable to find. I used the following commands to build git.
make prefix=$CUSTOM_BUILD_LOCATION
make install prefix=$CUSTOM_BUILD_LOCATION
While trying to build (without the 'gettext' library that's required for localization) I get the following error,
Manifying 8 pod documents
SUBDIR templates
MSGFMT po/build/locale/pt_PT/LC_MESSAGES/git.mo /bin/sh: 1: msgfmt: not found
Makefile:2179: recipe for target 'po/build/locale/pt_PT/LC_MESSAGES/git.mo' failed
make: *** [po/build/locale/pt_PT/LC_MESSAGES/git.mo] Error 127
What could I be missing?
Adding HTTPS support
--------------------
I tried to add HTTP/HTTPS support to the custom built version for which AFAIK 'git' depends on 'curl'. I tried providing the location of the curl source in the Makefile using the following line after reading the instructions in the Makefile.
CURLDIR=/path/to/curl/source
Even after doing this the custom built git errors with the following message when I try to use the 'git fetch' command,
fatal: Unable to find remote helper for 'https'
Any thing I'm missing?
Note: In case you were wondering, I was able to build 'git' after installing the dependant package which I find useless as I don't require any localization messages.
Signature · 1 line
Kaartic
Quoted 9 lines · Kaartic Sivaraam
Hello all,
Building without localization support
------------------------------------
I tried to build git from source without localization support by adding the following line to theMakefile,NO_GETTEXT=1
May be
make NO_GETTEXT=yes
Quoted 26 lines · Kaartic Sivaraam
Hello all,
Building without localization support
------------------------------------
I tried to build git from source without localization support by adding the following line to theMakefile,NO_GETTEXT=1
It doesn't seem to be working for reasons I'm unable to find. I used the following commands to build git.
make prefix=$CUSTOM_BUILD_LOCATION
make install prefix=$CUSTOM_BUILD_LOCATIONWhile trying to build (without the 'gettext' library that's required for localization) I get the following error,
Manifying 8 pod documents
SUBDIR templates
MSGFMT po/build/locale/pt_PT/LC_MESSAGES/git.mo/bin/sh: 1: msgfmt: not found
Makefile:2179: recipe for target 'po/build/locale/pt_PT/LC_MESSAGES/git.mo' failed
make: *** [po/build/locale/pt_PT/LC_MESSAGES/git.mo] Error 127
Quoted 1 line
What could I be missing?
There is
ifndef NO_GETTEXT
all:: $(MOFILES)
endifwhich attempts to avoid generating *.mo files, but that does not seem to be working.
Quoted 10 lines
Adding HTTPS support
--------------------
I tried to add HTTP/HTTPS support to the custom built version for which AFAIK 'git' depends on 'curl'. I tried providing the location of the curl source in theMakefileusing the following line after reading the instructions in theMakefile.CURLDIR=/path/to/curl/source
Shouldn't this point at an installed location (iow, we do not build curl from the source while building Git)?
# Define CURLDIR=/foo/bar if your curl header and library files are in # /foo/bar/include and /foo/bar/lib directories.
Quoted 4 lines
Even after doing this the custom built git errors with the following message when I try to use the 'git fetch' command,
fatal: Unable to find remote helper for 'https'
This is probably because you are trying to run without installing? Ask the "git" you built what its --exec-path is, and run "ls" on that directory to see if you have git-remote-https installed?
Trying a freshly built Git binaries without installing is done by setting GIT_EXEC_PATH to point at bin-wrappers/ directory at the top-level of your build tree (that is how our tests can run on an otherwise virgin box with no Git installed).
Quoted 13 lines · Junio C Hamano
Quoted 11 lines
While trying to build (without the 'gettext' library that's required for localization) I get the following error,
Manifying 8 pod documents
SUBDIR templates
MSGFMT po/build/locale/pt_PT/LC_MESSAGES/git.mo
/bin/sh: 1: msgfmt: not found
Makefile:2179: recipe for target 'po/build/locale/pt_PT/LC_MESSAGES/git.mo' failed
make: *** [po/build/locale/pt_PT/LC_MESSAGES/git.mo] Error 127Quoted 1 line
What could I be missing?
Quoted 8 lines
There is
ifndef NO_GETTEXT all:: $(MOFILES) endifwhich attempts to avoid generating *.mo files, but that does not seem to be working.
The above comes from one of the Tcl things (probably gitk-git) For now
$ make NO_GETTEXT=1 NO_MSGFMT=1
may help.
NO_GETTEXT is "My build environment may or may not be capable of doing the gettext things, but I choose not to use it in my build result" but NO_MSGFMT is simply "I do not have the msgfmt tool".
Having to specify both is rather unfortunate and we may want to streamline this.
Quoted 11 lines · Junio C Hamano
Adding HTTPS support
Quoted 10 lines
Quoted 10 lines
--------------------
I tried to add HTTP/HTTPS support to the custom built version for which
AFAIK 'git' depends on 'curl'. I tried providing the location of the
curl source in theMakefileusing the following line after reading the
instructions in theMakefile.
CURLDIR=/path/to/curl/source
Quoted 7 lines
Quoted 1 line
Shouldn't this point at an installed location (iow, we do not build curl from the source while building Git)?
# Define CURLDIR=/foo/bar if your curl header and library files
are in# /foo/bar/include and /foo/bar/lib directories.
I tried pointing it to the installed location, it doesn't seem to be working. To elaborate a little on what I did,
* I installed the "libcurl4-openssl-dev" package b
* I found that the 'include' directory to be present at '/usr/include/x86_64-linux-gnu/curl'. I wasn't sure if '/usr/lib/x86_64-linux-gnu/' is the corresponding library directory.
* I took the common parent of both '/usr' and ran the following commands to build 'git'
$ make CURLDIR=/usr prefix=/custom/location $ make CURLDIR=/usr install prefix=/custom/location
* The build did succeed but I get an error that "'https' helper is not found"
Was anything I did, wrong?
Quoted 1 line
This is probably because you are trying to run without installing?
Nope. I'm *installing* git not using the binary wrappers.
Quoted 3 lines
Ask the "git" you built what its --exec-path is, and run "ls" on that directory to see if you have git-remote-https installed?
Obviously, I don't see any 'git-remote-https' binary in the folder to which I built git.
Quoted 5 lines
Trying a freshly built Git binaries without installing is done by setting
GIT_EXEC_PATHto point at bin-wrappers/ directory at the top-level of your build tree (that is how our tests can run on an otherwise virgin box with no Git installed).
Quoted 6 lines · Junio C Hamano
Junio C Hamano <[email protected]> writes:
$ make NO_GETTEXT=1 NO_MSGFMT=1may help.
Ok, I seem to have crapped a little. It seems following the intructions in the Makefile blindly led to this issue. Reading the instruction "Define NO_GETTEXT if you don't want Git output to be translated.", I defined NO_GETTEXT=1 in the Makefile itself! (as specified in the previous thread)
I'm able to build git without localization support by using the following command,
make NO_GETTEXT=1 prefix=/custom/location
Quoted 6 lines
NO_GETTEXTis "My build environment may or may not be capable of doing the gettext things, but I choose not to use it in my build result" butNO_MSGFMTis simply "I do not have the msgfmt tool".Having to specify both is rather unfortunate and we may want to streamline this.
I guess it's not required!
Signature · 1 line
Kaartic
Quoted 12 lines · Kaartic Sivaraam
I tried pointing it to the installed location, it doesn't seem to be working. To elaborate a little on what I did,
* I installed the "libcurl4-openssl-dev" package b
* I found that the 'include' directory to be present at '/usr/include/x86_64-linux-gnu/curl'. I wasn't sure if '/usr/lib/x86_64-linux-gnu/' is the corresponding library directory.
* I took the common parent of both '/usr' and ran the following
commands to build 'git'
Quoted 9 lines
$ make CURLDIR=/usr prefix=/custom/location $ make CURLDIR=/usr install prefix=/custom/location* The build did succeed but I get an error that "'https' helper
is not found"Was anything I did, wrong?
Ok, at last I was able to build git with https support using 'curl' built from it's source. Anyways, thanks for the help, folks.
Quoted 17 lines
Quoted 1 line
This is probably because you are trying to run without installing?
Nope. I'm *installing* git not using the binary wrappers.
Quoted 3 lines
Ask the "git" you built what its --exec-path is, and run "ls" on that directory to see if you have git-remote-https installed?
Obviously, I don't see any 'git-remote-https' binary in the folder to which I built git.
Quoted 5 lines
Trying a freshly built Git binaries without installing is done by setting
GIT_EXEC_PATHto point at bin-wrappers/ directory at the top-level of your build tree (that is how our tests can run on an otherwise virgin box with no Git installed).