patch "iio: light: tsl2563: use correct event code" added to staging-linus

This is a note to let you know that I've just added the patch titled

iio: light: tsl2563: use correct event code

to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From: Akinobu Mita <[email protected]>
Date: Wed, 21 Jun 2017 01:46:37 +0900
Subject: iio: light: tsl2563: use correct event code

The TSL2563 driver provides three iio channels, two of which are raw ADC channels (channel 0 and channel 1) in the device and the remaining one is calculated by the two. The ADC channel 0 only supports programmable interrupt with threshold settings and this driver supports the event but the generated event code does not contain the corresponding iio channel type.

This is going to change userspace ABI. Hopefully fixing this to be what it should always have been won't break any userspace code.

---
 drivers/iio/light/tsl2563.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index e7d4ea75e007..7599693f7fe9 100644
@@ -626,7 +626,7 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private)
 	struct tsl2563_chip *chip = iio_priv(dev_info);
 
 	iio_push_event(dev_info,
-		       IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+		       IIO_UNMOD_EVENT_CODE(IIO_INTENSITY,
 					    0,
 					    IIO_EV_TYPE_THRESH,
 					    IIO_EV_DIR_EITHER),

2.13.3