FAILED: patch "[PATCH] MIPS: SEAD-3: Fix GIC interrupt specifiers" failed to apply to 4.9-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
Quoted 1 line
From
d3f616346def161cfb0e4153692713f066755639Mon Sep 17 00:00:00 2001
From: Paul Burton <[email protected]>
Date: Fri, 2 Jun 2017 12:29:59 -0700
Subject: [PATCH] MIPS: SEAD-3: Fix GIC interrupt specifiers
The various interrupt specifiers in the device tree are not in a valid format for the MIPS GIC interrupt controller binding. Where each interrupt should provide 3 values - GIC_LOCAL or GIC_SHARED, the pin number & the type of interrupt - the device tree was only providing the pin number. This causes interrupts for those devices to not be used when a GIC is present. SEAD-3 systems without a GIC are unaffected since the DT fixup code generates interrupt specifiers that are valid for the CPU interrupt controller.
Fix this by adding the GIC_SHARED & IRQ_TYPE_LEVEL_HIGH values to each interrupt specifier.
Patchwork: https://patchwork.linux-mips.org/patch/16189/
arch/mips/boot/dts/mti/sead3.dts +4 -4
@@ -60,7 +60,7 @@ reg = <0x1b200000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0>; /* GIC 0 or CPU 6 */ + interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */ has-transaction-translator; };
@@ -223,7 +223,7 @@ clock-frequency = <14745600>; interrupt-parent = <&gic>; - interrupts = <3>; /* GIC 3 or CPU 4 */ + interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>; /* GIC 3 or CPU 4 */ no-loopback-test; };
@@ -238,7 +238,7 @@ clock-frequency = <14745600>; interrupt-parent = <&gic>; - interrupts = <2>; /* GIC 2 or CPU 4 */ + interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>; /* GIC 2 or CPU 4 */ no-loopback-test; };
@@ -249,7 +249,7 @@ reg-io-width = <4>; interrupt-parent = <&gic>; - interrupts = <0>; /* GIC 0 or CPU 6 */ + interrupts = <GIC_SHARED 0 IRQ_TYPE_LEVEL_HIGH>; /* GIC 0 or CPU 6 */ phy-mode = "mii"; smsc,irq-push-pull;