Skip to contentSkip to conversation

drm/msm/: make clk_init_data const

PATCH New Bhumika Goyal 1 participant 1 message Aug 18, 2017

Subsystems (3)
DRM drivers Arm Qualcomm mailing list DRM driver for Qualcomm display hardware
lore
Share & tools
lore

Bhumika Goyal

author
#0 lore raw

PATCH 1/1 drm/msm/: make clk_init_data const

Make these const as they are only stored in the init field of a clk_hw structure, which is const.
Done using Coccinelle.

Signed-off-by Bhumika Goyal <[email protected]>
---
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c     | 2 +-
 drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c     | 2 +-
 drivers/gpu/drm/msm/mdp/mdp4/mdp4_lvds_pll.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c +1 -1
index 1fb7645..dea4697 100644
@@ -702,7 +702,7 @@ static int hdmi_8996_pll_is_enabled(struct clk_hw *hw)
 	"xo",
 };
 
-static struct clk_init_data pll_init = {
+static const struct clk_init_data pll_init = {
 	.name = "hdmipll",
 	.ops = &hdmi_8996_pll_ops,
 	.parent_names = hdmi_pll_parents,
drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c +1 -1
index 9959075..2e3c147 100644
@@ -419,7 +419,7 @@ static int hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	"pxo",
 };
 
-static struct clk_init_data pll_init = {
+static const struct clk_init_data pll_init = {
 	.name = "hdmi_pll",
 	.ops = &hdmi_pll_ops,
 	.parent_names = hdmi_pll_parents,
drivers/gpu/drm/msm/mdp/mdp4/mdp4_lvds_pll.c +1 -1
index ce42459..b9a7104 100644
@@ -137,7 +137,7 @@ static int mpd4_lvds_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	"pxo",
 };
 
-static struct clk_init_data pll_init = {
+static const struct clk_init_data pll_init = {
 	.name = "mpd4_lvds_pll",
 	.ops = &mpd4_lvds_pll_ops,
 	.parent_names = mpd4_lvds_pll_parents,
Signature · 6 lines
1.9.1

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel