staging: rtl8723bs: Do not initialise statics to 0
PATCH 1/1 staging: rtl8723bs: Do not initialise statics to 0
Static variables are initialised to 0 by gcc
Signed-off-by Harsha Sharma <[email protected]>
--- drivers/staging/rtl8723bs/os_dep/os_intfs.c | 48 ++++++++++++++--------------- 1 file changed, 24 insertions(+), 24 deletions(-)
drivers/staging/rtl8723bs/os_dep/os_intfs.c +24 -24
@@ -24,9 +24,9 @@MODULE_VERSION (DRIVERVERSION );/* module param defaults */ -static int rtw_chip_version =0x00 ; +static int rtw_chip_version;static int rtw_rfintfs =HWPI ; -static int rtw_lbkmode =0 ;/* RTL8712_AIR_TRX; */ +static int rtw_lbkmode;/* RTL8712_AIR_TRX; */ static int rtw_network_mode = Ndis802_11IBSS;/* Ndis802_11Infrastructure;infra, ad-hoc, auto */
@@ -40,7 +40,7 @@static int rtw_preamble =PREAMBLE_LONG ;/* long, short, auto */ static int rtw_scan_mode =1 ;/* active, passive */ static int rtw_adhoc_tx_pwr =1 ; -static int rtw_soft_ap =0 ; +static int rtw_soft_ap;/* int smart_ps = 1; */ static int rtw_power_mgnt =1 ;static int rtw_ips_mode =IPS_NORMAL ;
@@ -61,18 +61,18 @@/* int qos_enable = 0; */ static int rtw_ack_policy =NORMAL_ACK ; -static int rtw_software_encrypt =0 ; -static int rtw_software_decrypt =0 ; +static int rtw_software_encrypt; +static int rtw_software_decrypt; -static int rtw_acm_method =0 ;/* 0:By SW 1:By HW. */ +static int rtw_acm_method;/* 0:By SW 1:By HW. */ static int rtw_wmm_enable =1 ;/* default is set to enable the wmm. */ -static int rtw_uapsd_enable =0 ; +static int rtw_uapsd_enable;static int rtw_uapsd_max_sp =NO_LIMIT ; -static int rtw_uapsd_acbk_en =0 ; -static int rtw_uapsd_acbe_en =0 ; -static int rtw_uapsd_acvi_en =0 ; -static int rtw_uapsd_acvo_en =0 ; +static int rtw_uapsd_acbk_en; +static int rtw_uapsd_acbe_en; +static int rtw_uapsd_acvi_en; +static int rtw_uapsd_acvo_en;int rtw_ht_enable =1 ;/* 0: 20 MHz, 1: 40 MHz, 2: 80 MHz, 3: 160MHz, 4: 80+80MHz */
@@ -81,7 +81,7 @@static int rtw_bw_mode =0x21 ;static int rtw_ampdu_enable =1 ;/* for enable tx_ampdu ,0: disable, 0x1:enable (but wifi_spec should be 0), 0x2: force enable (don't care wifi_spec) */ static int rtw_rx_stbc =1 ;/* 0: disable, 1:enable 2.4g */ -static int rtw_ampdu_amsdu =0 ;/* 0: disabled, 1:enabled, 2:auto . There is an IOT issu with DLINK DIR-629 when the flag turn on */ +static int rtw_ampdu_amsdu;/* 0: disabled, 1:enabled, 2:auto . There is an IOT issu with DLINK DIR-629 when the flag turn on */ /* Short GI support Bit Map */ /* BIT0 - 20MHz, 0: non-support, 1: support */ /* BIT1 - 40MHz, 0: non-support, 1: support */
@@ -99,8 +99,8 @@/* int rf_config = RF_1T2R; 1T2R */ static int rtw_rf_config =RF_MAX_TYPE ;/* auto */ -static int rtw_low_power =0 ; -static int rtw_wifi_spec =0 ; +static int rtw_low_power; +static int rtw_wifi_spec;static int rtw_channel_plan =RT_CHANNEL_DOMAIN_MAX ;static int rtw_btcoex_enable =1 ;
@@ -116,29 +116,29 @@static int rtw_AcceptAddbaReq = true;/* 0:Reject AP's Add BA req, 1:Accept AP's Add BA req. */ static int rtw_antdiv_cfg =1 ;/* 0:OFF , 1:ON, 2:decide by Efuse config */ -static int rtw_antdiv_type =0 ;/* 0:decide by efuse 1: for 88EE, 1Tx and 1RxCG are diversity.(2 Ant with SPDT), 2: for 88EE, 1Tx and 2Rx are diversity.(2 Ant, Tx and RxCG are both on aux port, RxCS is on main port), 3: for 88EE, 1Tx and 1RxCG are fixed.(1Ant, Tx and RxCG are both on aux port) */ +static int rtw_antdiv_type;/* 0:decide by efuse 1: for 88EE, 1Tx and 1RxCG are diversity.(2 Ant with SPDT), 2: for 88EE, 1Tx and 2Rx are diversity.(2 Ant, Tx and RxCG are both on aux port, RxCS is on main port), 3: for 88EE, 1Tx and 1RxCG are fixed.(1Ant, Tx and RxCG are both on aux port) */ -static int rtw_enusbss =0 ;/* 0:disable, 1:enable */ +static int rtw_enusbss;/* 0:disable, 1:enable */ static int rtw_hwpdn_mode =2 ;/* 0:disable, 1:enable, 2: by EFUSE config */ #ifdef CONFIG_HW_PWRP_DETECTION static int rtw_hwpwrp_detect =1 ;#else -static int rtw_hwpwrp_detect =0 ;/* HW power ping detect 0:disable , 1:enable */ +static int rtw_hwpwrp_detect;/* HW power ping detect 0:disable , 1:enable */ #endif -static int rtw_hw_wps_pbc =0 ; +static int rtw_hw_wps_pbc;int rtw_mc2u_disable =0 ; -static int rtw_80211d =0 ; +static int rtw_80211d;#ifdef CONFIG_QOS_OPTIMIZATION static int rtw_qos_opt_enable =1 ;/* 0: disable, 1:enable */ #else -static int rtw_qos_opt_enable =0 ;/* 0: disable, 1:enable */ +static int rtw_qos_opt_enable;/* 0: disable, 1:enable */ #endif module_param (rtw_qos_opt_enable, int,0644 );
@@ -192,7 +192,7 @@module_param (rtw_80211d, int,0644 );MODULE_PARM_DESC (rtw_80211d,"Enable 802.11d mechanism" ); -static uint rtw_notch_filter =0 ; +static uint rtw_notch_filter;module_param (rtw_notch_filter, uint,0644 );MODULE_PARM_DESC (rtw_notch_filter,"0:Disable, 1:Enable, 2:Enable only for P2P" );
@@ -202,8 +202,8 @@module_param (rtw_hiq_filter, uint,0644 );MODULE_PARM_DESC (rtw_hiq_filter,"0:allow all, 1:allow special, 2:deny all" ); -static int rtw_tx_pwr_lmt_enable =0 ; -static int rtw_tx_pwr_by_rate =0 ; +static int rtw_tx_pwr_lmt_enable; +static int rtw_tx_pwr_by_rate;module_param (rtw_tx_pwr_lmt_enable, int,0644 );MODULE_PARM_DESC (rtw_tx_pwr_lmt_enable,"0:Disable, 1:Enable, 2: Depend on efuse" );
@@ -225,7 +225,7 @@static int rtw_load_phy_file = (BIT2 |BIT6 );module_param (rtw_load_phy_file, int,0644 );MODULE_PARM_DESC (rtw_load_phy_file,"PHY File Bit Map" ); -static int rtw_decrypt_phy_file =0 ; +static int rtw_decrypt_phy_file;module_param (rtw_decrypt_phy_file, int,0644 );MODULE_PARM_DESC (rtw_decrypt_phy_file,"Enable Decrypt PHY File" );
Signature · 1 line
1.9.1