Skip to contentSkip to conversation

uio_dmem_genirq.c and DMA mapping to user space ?

DISCUSSION Joakim Tjernlund 2 participants 3 messages Sep 12, 2017

lore
Share & tools
lore
#0 lore raw

Hi

I am trying to use the uio_dmem_genirq.c driver for allocating DMA memory to a PCI device using the uio_pci_generic.c driver.

I got as far as defining an UIO dev containing only Dynamic DMA memory and now I am stuck.
I can see how DMA memory is allocated when opening the /dev/uio device but I cannot figure out how to mmap this memory to User space as well so I can share this memory with the PCI device and my user space driver.

What am I missing?

Jocke

#1 lore raw
Quoted 5 lines · Joakim Tjernlund

Hi

I am trying to use the uio_dmem_genirq.c driver for allocating DMA memory to a PCI device using the uio_pci_generic.c driver.

Quoted 7 lines

I got as far as defining an UIO dev containing only Dynamic DMA memory and now I am stuck.
I can see how DMA memory is allocated when opening the /dev/uio device but I cannot figure out how to mmap this memory to User space as well so I can share this memory with the PCI device and my user space driver.

What am I missing?

Why can't you call mmap() on the fd you created when you opened /dev/uio? What happens when you do that?

thanks,

greg k-h

#2 lore raw
Quoted 12 lines · On Tue, 2017-09-12 at 05:37 -0700, [email protected] wrote:
Quoted 11 lines · Joakim Tjernlund

Hi

I am trying to use the uio_dmem_genirq.c driver for allocating DMA memory to a PCI device using the uio_pci_generic.c driver.

I got as far as defining an UIO dev containing only Dynamic DMA memory and now I am stuck.
I can see how DMA memory is allocated when opening the /dev/uio device but I cannot figure out how to mmap this memory to User space as well so I can share this memory with the PCI device and my user space driver.

Quoted 4 lines
Quoted 1 line

What am I missing?

Why can't you call mmap() on the fd you created when you opened /dev/uio? What happens when you do that?

Haven't tried that as I figured it had to be something similar as UIO PCI
where you can have several memory regions and therefore must mmap one of
the resource files under sys:
# > pwd
/sys/bus/pci/drivers/uio_pci_generic/0000:01:00.0/uio/uio8/device
leipzig device # cat /sys/devices/platform/ffe250000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/resource 0x0000000c10000000 0x0000000c11ffffff 0x0000000000140204
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
leipzig device # pwd
/sys/bus/pci/drivers/uio_pci_generic/0000:01:00.0/uio/uio8/device
leipzig device # cat resource
0x0000000c10000000 0x0000000c11ffffff 0x0000000000140204
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x0000000000000000
leipzig device # ls resource*
resource resource0

Here one opens and mmaps resource0 to get at
0x0000000c10000000 0x0000000c11ffffff 0x0000000000140204

Jocke