patch "IIO: BME280: Updates to Humidity readings need ctrl_reg write!" added to staging-linus
Subsystems (2)
This is a note to let you know that I've just added the patch titled
IIO: BME280: Updates to Humidity readings need ctrl_reg write!
to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
Quoted 1 line
From
4b1f0c31f96c45e8521dd84aae50f2aa4aecfb7bMon Sep 17 00:00:00 2001
From: Colin Parker <[email protected]>
Date: Mon, 28 Aug 2017 16:21:39 -0700
Subject: IIO: BME280: Updates to Humidity readings need ctrl_reg write!
The ctrl_reg register needs to be written after any write to the humidity registers. The value written to the ctrl_reg register does not necessarily need to change, but a write operation must occur.
The regmap_update_bits functions will not write to a register if the register value matches the value to be written. This saves unnecessary bus operations. The change in this patch forces a bus write during the chip_config operation by switching to regmap_write_bits.
This will fix issues where the Humidity Sensor Oversampling bits are not updated after initialization.
--- drivers/iio/pressure/bmp280-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/pressure/bmp280-core.c +1 -1
@@ -558,7 +558,7 @@ static int bmp280_chip_config(struct bmp280_data *data)u8 osrs =BMP280_OSRS_TEMP_X (data->oversampling_temp +1 ) |BMP280_OSRS_PRESS_X (data->oversampling_press +1 ); - ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS, + ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS, BMP280_OSRS_TEMP_MASK | BMP280_OSRS_PRESS_MASK | BMP280_MODE_MASK,
Signature · 1 line
2.14.1