Patch "usb: pci-quirks.c: Corrected timeout values used in handshake" has been added to the 3.18-stable tree
Subsystems (3)
This is a note to let you know that I've just added the patch titled
usb: pci-quirks.c: Corrected timeout values used in handshake
to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
usb-pci-quirks.c-corrected-timeout-values-used-in-handshake.patch
and it can be found in the queue-3.18 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
114ec3a6f9096d211a4aff4277793ba969a62c73Mon Sep 17 00:00:00 2001
From: Jim Dickerson <[email protected]>
Date: Mon, 18 Sep 2017 17:39:14 +0300
Subject: usb: pci-quirks.c: Corrected timeout values used in handshake
From: Jim Dickerson <[email protected]>
commit 114ec3a6f9096d211a4aff4277793ba969a62c73 upstream.
Servers were emitting failed handoff messages but were not waiting the full 1 second as designated in section 4.22.1 of the eXtensible Host Controller Interface specifications. The handshake was using wrong units so calls were made with milliseconds not microseconds. Comments referenced 5 seconds not 1 second as in specs.
The wrong units were also corrected in a second handshake call.
--- drivers/usb/host/pci-quirks.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/usb/host/pci-quirks.c +4 -4
@@ -970,7 +970,7 @@ EXPORT_SYMBOL_GPL(usb_disable_xhci_ports* * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS. * It signals to the BIOS that the OS wants control of the host controller, -* and then waits 5 seconds for the BIOS to hand over control. +* and then waits 1 second for the BIOS to hand over control. * If we timeout, assume the BIOS is broken and take control anyway. */ static void quirk_usb_handoff_xhci (struct pci_dev *pdev)
@@ -1016,9 +1016,9 @@ static void quirk_usb_handoff_xhci(strucif (val &XHCI_HC_BIOS_OWNED ) {writel (val |XHCI_HC_OS_OWNED , base + ext_cap_offset); -/* Wait for 5 seconds with 10 microsecond polling interval */ +/* Wait for 1 second with 10 microsecond polling interval */ timeout =handshake (base + ext_cap_offset,XHCI_HC_BIOS_OWNED , -0 ,5000 ,10 ); +0 ,1000000 ,10 );/* Assume a buggy BIOS and take HC ownership anyway */ if (timeout) {
@@ -1046,7 +1046,7 @@ hc_init:* operational or runtime registers. Wait 5 seconds and no more. */ timeout =handshake (op_reg_base +XHCI_STS_OFFSET ,XHCI_STS_CNR ,0 , -5000 ,10 ); +5000000 ,10 );/* Assume a buggy HC and start HC initialization anyway */ if (timeout) { val =readl (op_reg_base +XHCI_STS_OFFSET );
Patches currently in stable-queue which might be from [email protected] are
queue-3.18/usb-pci-quirks.c-corrected-timeout-values-used-in-handshake.patch