Patch "usb: gadget: udc: atmel: set vbus irqflags explicitly" has been added to the 4.9-stable tree

This is a note to let you know that I've just added the patch titled

usb: gadget: udc: atmel: set vbus irqflags explicitly

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
usb-gadget-udc-atmel-set-vbus-irqflags-explicitly.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Nicolas Ferre <[email protected]>
Date: Thu, 31 Aug 2017 14:51:40 +0200
Subject: usb: gadget: udc: atmel: set vbus irqflags explicitly

From: Nicolas Ferre <[email protected]>

commit 6baeda120d90aa637b08f7604de104ab00ce9126 upstream.

The driver triggers actions on both edges of the vbus signal.

The former PIO controller was triggering IRQs on both falling and rising edges by default. Newer PIO controller don't, so it's better to set it explicitly to IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING.

Without this patch we may trigger the connection with host but only on some bouncing signal conditions and thus lose connecting events.

---
 drivers/usb/gadget/udc/atmel_usba_udc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -28,6 +28,8 @@
 #include <linux/of_gpio.h>
 
 #include "atmel_usba_udc.h"
+#define USBA_VBUS_IRQFLAGS (IRQF_ONESHOT \
+			   | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING)
 
 #ifdef CONFIG_USB_GADGET_DEBUG_FS
 #include <linux/debugfs.h>

@@ -2172,7 +2174,7 @@ static int usba_udc_probe(struct platfor
 					IRQ_NOAUTOEN);
 			ret = devm_request_threaded_irq(&pdev->dev,
 					gpio_to_irq(udc->vbus_pin), NULL,
-					usba_vbus_irq_thread, IRQF_ONESHOT,
+					usba_vbus_irq_thread, USBA_VBUS_IRQFLAGS,
 					"atmel_usba_udc", udc);
 			if (ret) {
 				udc->vbus_pin = -ENODEV;

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/usb-gadget-udc-atmel-set-vbus-irqflags-explicitly.patch