Skip to contentSkip to conversation

Adding NV12 support

PATCH In review Vidya Srinivas 4 participants 27 messages Oct 10, 2017 – Oct 17, 2017

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Adding NV12 support

This patch series is adding NV12 support for Broxton display after rebasing on latest drm-tip.
Initial series of the patches can be found here:
https://lists.freedesktop.org/archives/intel-gfx/2015-May/066786.html

Previous revision history:
The first version of patches were reviewed when floated by Chandra in 2015 but currently there was a design change with respect to
- the way fb offset is handled
- the way rotation is handled
Current NV12 patch series has been ported as per the
current changes on drm-tip

Review comments from Ville (12th June 2017) have been addressed Review comments from Clinton A Taylor (7th July 2017) have been addressed

Review comments from Clinton A Taylor (10th July 2017)
have been addressed. Had missed out tested-by/reviewed-by in the patches.

Fixed that error in this series.
Review comments from Ville (11th July 2017) addressed. Review comments from Paauwe, Bob (29th July 2017) addressed.

Update from last rev (28 Aug 2017)
Rebased the series.
Tested with IGT for rotation, sprite and tiling combinations. IGT Links:
https://patchwork.kernel.org/patch/9995943/
https://patchwork.kernel.org/patch/9995945/

Patches are tested (dependent on) watermark necessary changes
https://patchwork.freedesktop.org/series/31640/

Chandra Konduru (6):
drm/i915: Set scaler mode for NV12
drm/i915: Update format_is_yuv() to include NV12 drm/i915: Upscale scaler max scale for NV12 drm/i915: Add NV12 as supported format for primary plane drm/i915: Add NV12 as supported format for sprite plane drm/i915: Add NV12 support to intel_framebuffer_init

Mahesh Kumar (8):
drm/i915/skl+: rename skl_wm_values struct to skl_ddb_values drm/i915/skl+: refactore WM calculation for NV12 drm/i915/skl+: add NV12 in skl_format_to_fourcc drm/i915/skl+: support varification of DDB HW state for NV12 drm/i915/skl+: NV12 related changes for WM drm/i915/skl+: pass skl_wm_level struct to wm compute func drm/i915/skl+: make sure higher latency level has higher wm value drm/i915/skl+: nv12 workaround disable WM level 1-7

 drivers/gpu/drm/i915/i915_drv.h      |   7 +-
 drivers/gpu/drm/i915/i915_reg.h      |   1 +
 drivers/gpu/drm/i915/intel_atomic.c  |   8 +-
 drivers/gpu/drm/i915/intel_display.c |  71 +++++++--
 drivers/gpu/drm/i915/intel_drv.h     |   8 +-
 drivers/gpu/drm/i915/intel_pm.c      | 275 +++++++++++++++++++++++------------
 drivers/gpu/drm/i915/intel_sprite.c  |  34 ++++-
 7 files changed, 284 insertions(+), 120 deletions(-)
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/14 drm/i915/skl+: rename skl_wm_values struct to skl_ddb_values

From: Mahesh Kumar <[email protected]>

skl_wm_values struct contains values os pipe/plane DDB only. so rename it for better readability of code.

s/skl_wm_values/skl_ddb_values

---
 drivers/gpu/drm/i915/i915_drv.h  |  4 ++--
 drivers/gpu/drm/i915/intel_drv.h |  2 +-
 drivers/gpu/drm/i915/intel_pm.c  | 12 ++++++------
 3 files changed, 9 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +2 -2
index 770305b..1b5cf18 100644
@@ -1851,7 +1851,7 @@ struct skl_ddb_allocation {
 	struct skl_ddb_entry y_plane[I915_MAX_PIPES][I915_MAX_PLANES];
 };
 
-struct skl_wm_values {
+struct skl_ddb_values {
 	unsigned dirty_pipes;
 	struct skl_ddb_allocation ddb;
 };
@@ -2511,7 +2511,7 @@ struct drm_i915_private {
 		/* current hardware state */
 		union {
 			struct ilk_wm_values hw;
-			struct skl_wm_values skl_hw;
+			struct skl_ddb_values skl_hw;
 			struct vlv_wm_values vlv;
 			struct g4x_wm_values g4x;
 		};
drivers/gpu/drm/i915/intel_drv.h +1 -1
index 0cab667..160fded 100644
@@ -396,7 +396,7 @@ struct intel_atomic_state {
 	bool skip_intermediate_wm;
 
 	/* Gen9+ only */
-	struct skl_wm_values wm_results;
+	struct skl_ddb_values wm_results;
 
 	struct i915_sw_fence commit_ready;
 
drivers/gpu/drm/i915/intel_pm.c +6 -6
index 9d0ca26..029487d 100644
@@ -4981,8 +4981,8 @@ static int skl_update_pipe_wm(struct drm_crtc_state *cstate,
 }
 
 static void
-skl_copy_wm_for_pipe(struct skl_wm_values *dst,
-		     struct skl_wm_values *src,
+skl_copy_wm_for_pipe(struct skl_ddb_values *dst,
+		     struct skl_ddb_values *src,
 		     enum pipe pipe)
 {
 	memcpy(dst->ddb.y_plane[pipe], src->ddb.y_plane[pipe],
@@ -5034,7 +5034,7 @@ static int skl_update_pipe_wm(struct drm_crtc_state *cstate,
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *cstate;
 	struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
-	struct skl_wm_values *results = &intel_state->wm_results;
+	struct skl_ddb_values *results = &intel_state->wm_results;
 	struct drm_device *dev = state->dev;
 	struct skl_pipe_wm *pipe_wm;
 	bool changed = false;
@@ -5136,8 +5136,8 @@ static void skl_initial_wm(struct intel_atomic_state *state,
 	struct intel_crtc *intel_crtc = to_intel_crtc(cstate->base.crtc);
 	struct drm_device *dev = intel_crtc->base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct skl_wm_values *results = &state->wm_results;
-	struct skl_wm_values *hw_vals = &dev_priv->wm.skl_hw;
+	struct skl_ddb_values *results = &state->wm_results;
+	struct skl_ddb_values *hw_vals = &dev_priv->wm.skl_hw;
 	enum pipe pipe = intel_crtc->pipe;
 
 	if ((results->dirty_pipes & drm_crtc_mask(&intel_crtc->base)) == 0)
@@ -5280,7 +5280,7 @@ void skl_pipe_wm_get_hw_state(struct drm_crtc *crtc,
 void skl_wm_get_hw_state(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct skl_wm_values *hw = &dev_priv->wm.skl_hw;
+	struct skl_ddb_values *hw = &dev_priv->wm.skl_hw;
 	struct skl_ddb_allocation *ddb = &dev_priv->wm.skl_hw.ddb;
 	struct drm_crtc *crtc;
 	struct intel_crtc *intel_crtc;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH 2/14 drm/i915/skl+: refactore WM calculation for NV12

In reply to Vidya Srinivas

From: Mahesh Kumar <[email protected]>

Current code calculates DDB for planar formats in such a way that we store DDB of plane-0 in plane 1 & vice-versa.
In order to make this clean this patch refactors WM/DDB calculation for NV12 planar formats.

---
 drivers/gpu/drm/i915/i915_drv.h  |   2 +-
 drivers/gpu/drm/i915/intel_drv.h |   1 +
 drivers/gpu/drm/i915/intel_pm.c  | 120 +++++++++++++++++++--------------------
 3 files changed, 62 insertions(+), 61 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -1
index 1b5cf18..090832c 100644
@@ -1848,7 +1848,7 @@ static inline bool skl_ddb_entry_equal(const struct skl_ddb_entry *e1,
 
 struct skl_ddb_allocation {
 	struct skl_ddb_entry plane[I915_MAX_PIPES][I915_MAX_PLANES]; /* packed/uv */
-	struct skl_ddb_entry y_plane[I915_MAX_PIPES][I915_MAX_PLANES];
+	struct skl_ddb_entry uv_plane[I915_MAX_PIPES][I915_MAX_PLANES];
 };
 
 struct skl_ddb_values {
drivers/gpu/drm/i915/intel_drv.h +1 -0
index 160fded..f897580 100644
@@ -510,6 +510,7 @@ struct intel_pipe_wm {
 struct skl_plane_wm {
 	struct skl_wm_level wm[8];
 	struct skl_wm_level trans_wm;
+	bool is_nv12;
 };
 
 struct skl_pipe_wm {
drivers/gpu/drm/i915/intel_pm.c +60 -60

273 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH 3/14 drm/i915/skl+: add NV12 in skl_format_to_fourcc

In reply to Vidya Srinivas

From: Mahesh Kumar <[email protected]>

Add support of recognizing DRM_FORMAT_NV12 from plane_format register value.

---
 drivers/gpu/drm/i915/intel_display.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/gpu/drm/i915/intel_display.c +2 -0
index 45d6e57..36c2640 100644
@@ -2708,6 +2708,8 @@ static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
 	switch (format) {
 	case PLANE_CTL_FORMAT_RGB_565:
 		return DRM_FORMAT_RGB565;
+	case PLANE_CTL_FORMAT_NV12:
+		return DRM_FORMAT_NV12;
 	default:
 	case PLANE_CTL_FORMAT_XRGB_8888:
 		if (rgb_order) {
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH 4/14 drm/i915/skl+: support varification of DDB HW state for NV12

In reply to Vidya Srinivas

From: Mahesh Kumar <[email protected]>

NV12 formats have two registers for DDB. verify both the registers for NV12 during verify_wm_state.

---
 drivers/gpu/drm/i915/intel_display.c |  2 +-
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 drivers/gpu/drm/i915/intel_pm.c      | 50 ++++++++++++++++++++++++++++--------
 3 files changed, 42 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/intel_display.c +1 -1
index 36c2640..a10bbe8 100644
@@ -2703,7 +2703,7 @@ static int i9xx_format_to_fourcc(int format)
 	}
 }
 
-static int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
+int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
 {
 	switch (format) {
 	case PLANE_CTL_FORMAT_RGB_565:
drivers/gpu/drm/i915/intel_drv.h +1 -0
index f897580..4f98684 100644
@@ -1502,6 +1502,7 @@ u32 skl_plane_stride(const struct drm_framebuffer *fb, int plane,
 		     unsigned int rotation);
 int skl_check_plane_surface(struct intel_plane_state *plane_state);
 int i9xx_check_plane_surface(struct intel_plane_state *plane_state);
+int skl_format_to_fourcc(int format, bool rgb_order, bool alpha);
 
 /* intel_csr.c */
 void intel_csr_ucode_init(struct drm_i915_private *);
drivers/gpu/drm/i915/intel_pm.c +40 -10

62 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH 5/14 drm/i915/skl+: NV12 related changes for WM

In reply to Vidya Srinivas

From: Mahesh Kumar <[email protected]>

NV12 require WM calculation for UV plane as well.
UV plane WM should also fulfill all the WM related restrictions.

---
 drivers/gpu/drm/i915/i915_drv.h  |  1 +
 drivers/gpu/drm/i915/intel_drv.h |  1 +
 drivers/gpu/drm/i915/intel_pm.c  | 54 ++++++++++++++++++++++++++++++++--------
 3 files changed, 45 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
index 090832c..e697ead 100644
@@ -1866,6 +1866,7 @@ struct skl_wm_level {
 struct skl_wm_params {
 	bool x_tiled, y_tiled;
 	bool rc_surface;
+	bool is_nv12;
 	uint32_t width;
 	uint8_t cpp;
 	uint32_t plane_pixel_rate;
drivers/gpu/drm/i915/intel_drv.h +1 -0
index 4f98684..51ae058 100644
@@ -509,6 +509,7 @@ struct intel_pipe_wm {
 
 struct skl_plane_wm {
 	struct skl_wm_level wm[8];
+	struct skl_wm_level uv_wm[8];
 	struct skl_wm_level trans_wm;
 	bool is_nv12;
 };
drivers/gpu/drm/i915/intel_pm.c +43 -11

120 lines not on this page · raw message

Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

PATCH 6/14 drm/i915/skl+: pass skl_wm_level struct to wm compute func

In reply to Vidya Srinivas

From: Mahesh Kumar <[email protected]>

This will reduce number of arguments required to be pass in skl_compute_plane_wm function.

---
 drivers/gpu/drm/i915/intel_pm.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +7 -11
index 7b3160c..e931e4a 100644
@@ -4499,9 +4499,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 				uint16_t ddb_allocation,
 				int level,
 				const struct skl_wm_params *wp,
-				uint16_t *out_blocks, /* out */
-				uint8_t *out_lines, /* out */
-				bool *enabled /* out */)
+				struct skl_wm_level *result /* out */)
 {
 	const struct drm_plane_state *pstate = &intel_pstate->base;
 	uint32_t latency = dev_priv->wm.skl_latency[level];
@@ -4514,7 +4512,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 
 	if (latency == 0 ||
 	    !intel_wm_plane_visible(cstate, intel_pstate)) {
-		*enabled = false;
+		result->plane_en = false;
 		return 0;
 	}
 
@@ -4569,7 +4567,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	}
 
 	if (res_blocks >= ddb_allocation || res_lines > 31) {
-		*enabled = false;
+		result->plane_en = false;
 
 		/*
 		 * If there are no valid level 0 watermarks, then we can't
@@ -4588,9 +4586,9 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 		}
 	}
 
-	*out_blocks = res_blocks;
-	*out_lines = res_lines;
-	*enabled = true;
+	result->plane_res_b = res_blocks;
+	result->plane_res_l = res_lines;
+	result->plane_en = true;
 
 	return 0;
 }
@@ -4631,9 +4629,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 					   ddb_blocks,
 					   level,
 					   wm_params,
-					   &result->plane_res_b,
-					   &result->plane_res_l,
-					   &result->plane_en);
+					   result);
 		if (ret)
 			return ret;
 	}
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#7 lore raw

PATCH 7/14 drm/i915/skl+: make sure higher latency level has higher wm value

In reply to Vidya Srinivas

From: Mahesh Kumar <[email protected]>

DDB allocation optimization algorithm require/assumes ddb allocation for any memory C-state level DDB value to be as high as level below. Render decompression require level WM to be as high as wm level-0. This patch fulfils both the requirements.

---
 drivers/gpu/drm/i915/intel_pm.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
drivers/gpu/drm/i915/intel_pm.c +18 -0
index e931e4a..c99639b 100644
@@ -4499,6 +4499,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 				uint16_t ddb_allocation,
 				int level,
 				const struct skl_wm_params *wp,
+				const struct skl_wm_level *result_prev,
 				struct skl_wm_level *result /* out */)
 {
 	const struct drm_plane_state *pstate = &intel_pstate->base;
@@ -4564,6 +4565,15 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 		} else {
 			res_blocks++;
 		}
+
+		/*
+		 * Make sure result blocks for higher latency levels are atleast
+		 * as high as level below.
+		 * Assumption in DDB algorithm optimization for special cases.
+		 * Also covers Display WA #1125 for RC.
+		 */
+		if (result_prev->plane_res_b > res_blocks)
+			res_blocks = result_prev->plane_res_b;
 	}
 
 	if (res_blocks >= ddb_allocation || res_lines > 31) {
@@ -4622,6 +4632,13 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 	for (level = 0; level <= max_level; level++) {
 		struct skl_wm_level *result = plane_num ? &wm->uv_wm[level] :
 							  &wm->wm[level];
+		struct skl_wm_level *result_prev;
+
+		if (level)
+			result_prev = plane_num ? &wm->uv_wm[level - 1] :
+						  &wm->wm[level - 1];
+		else
+			result_prev = plane_num ? &wm->uv_wm[0] : &wm->wm[0];
 
 		ret = skl_compute_plane_wm(dev_priv,
 					   cstate,
@@ -4629,6 +4646,7 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 					   ddb_blocks,
 					   level,
 					   wm_params,
+					   result_prev,
 					   result);
 		if (ret)
 			return ret;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#8 lore raw

PATCH 8/14 drm/i915/skl+: nv12 workaround disable WM level 1-7

In reply to Vidya Srinivas

From: Mahesh Kumar <[email protected]>

Display Workaround #0826 (SKL:ALL BXT:ALL) & #1059(CNL:A) Hardware sometimes fails to wake memory from pkg C states fetching the last few lines of planar YUV 420 (NV12) planes. This causes intermittent underflow and corruption.
WA: Disable package C states or do not enable latency levels 1 through 7 (WM1 - WM7) on NV12 planes.

---
 drivers/gpu/drm/i915/intel_pm.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/gpu/drm/i915/intel_pm.c +11 -0
index c99639b..7117011 100644
@@ -4596,6 +4596,17 @@ static int skl_compute_plane_wm(const struct drm_i915_private *dev_priv,
 		}
 	}
 
+	/*
+	 * Display WA #826 (SKL:ALL, BXT:ALL) & #1059 (CNL:A)
+	 * disable wm level 1-7 on NV12 planes
+	 */
+	if (wp->is_nv12 && level && (IS_SKYLAKE(dev_priv) ||
+			IS_BROXTON(dev_priv) ||
+			IS_CNL_REVID(dev_priv, CNL_REVID_A0, CNL_REVID_A0))) {
+		result->plane_en = false;
+		return 0;
+	}
+
 	result->plane_res_b = res_blocks;
 	result->plane_res_l = res_lines;
 	result->plane_en = true;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#9 lore raw

PATCH 9/14 drm/i915: Set scaler mode for NV12

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch sets appropriate scaler mode for NV12 format. In this mode, skylake scaler does either chroma-upsampling or chroma-upsampling and resolution scaling

v2: Review comments from Ville addressed
NV12 case to be checked first for setting the scaler

v3: Rebased (me)

v4: Rebased (me)

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v6: Rebased (me)

v7: Rebased (me)

v8: Rebased (me)
Restricting the NV12 change for scaler to BXT and KBL in this series.

---
 drivers/gpu/drm/i915/i915_reg.h     | 1 +
 drivers/gpu/drm/i915/intel_atomic.c | 8 +++++++-
 2 files changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 50e65c9..976b501 100644
@@ -6607,6 +6607,7 @@ enum {
 #define PS_SCALER_MODE_MASK (3 << 28)
 #define PS_SCALER_MODE_DYN  (0 << 28)
 #define PS_SCALER_MODE_HQ  (1 << 28)
+#define PS_SCALER_MODE_NV12 (2 << 28)
 #define PS_PLANE_SEL_MASK  (7 << 25)
 #define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
 #define PS_FILTER_MASK         (3 << 23)
drivers/gpu/drm/i915/intel_atomic.c +7 -1
index 36d4e63..606b5e3 100644
@@ -325,7 +325,13 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
 		}
 
 		/* set scaler mode */
-		if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			plane_state && plane_state->base.fb &&
+			plane_state->base.fb->format->format ==
+			DRM_FORMAT_NV12) {
+			scaler_state->scalers[*scaler_id].mode =
+				PS_SCALER_MODE_NV12;
+		} else if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
 			scaler_state->scalers[*scaler_id].mode = 0;
 		} else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
 			/*
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#10 lore raw

Re: [PATCH 09/14] drm/i915: Set scaler mode for NV12

Hi,

Quoted 54 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch sets appropriate scaler mode for NV12 format. In this mode, skylake scaler does either chroma-upsampling or chroma-upsampling and resolution scaling

v2: Review comments from Ville addressed
NV12 case to be checked first for setting the scaler

v3: Rebased (me)

v4: Rebased (me)

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v6: Rebased (me)

v7: Rebased (me)

v8: Rebased (me)
Restricting the NV12 change for scaler to BXT and KBL in this series.

---
  drivers/gpu/drm/i915/i915_reg.h     | 1 +
  drivers/gpu/drm/i915/intel_atomic.c | 8 +++++++-
  2 files changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 50e65c9..976b501 100644
@@ -6607,6 +6607,7 @@ enum {
  #define PS_SCALER_MODE_MASK (3 << 28)
  #define PS_SCALER_MODE_DYN  (0 << 28)
  #define PS_SCALER_MODE_HQ  (1 << 28)
+#define PS_SCALER_MODE_NV12 (2 << 28)
  #define PS_PLANE_SEL_MASK  (7 << 25)
  #define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
  #define PS_FILTER_MASK         (3 << 23)
drivers/gpu/drm/i915/intel_atomic.c +0 -0
index 36d4e63..606b5e3 100644
@@ -325,7 +325,13 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
  		}
 

drivers/gpu/drm/i915/intel_atomic.c int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, · line 335

Quoted 10 lines
drivers/gpu/drm/i915/intel_atomic.c +7 -1
  		/* set scaler mode */
-		if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			plane_state && plane_state->base.fb &&
+			plane_state->base.fb->format->format ==
+			DRM_FORMAT_NV12) {
+			scaler_state->scalers[*scaler_id].mode =
+				PS_SCALER_MODE_NV12;
+		} else if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
  			scaler_state->scalers[*scaler_id].mode = 0;

IN CNL for NV12 (planar formats) bit 29 of PS_CTRL register should be set to 1b. This require respective change in skylake_update_primary_plane & skl_update_plane as well. please take care of that.
better like plane_ctl calculate ps_ctl in advance only & write during plane_update.

-Mahesh

drivers/gpu/drm/i915/intel_atomic.c int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, · line 337

Quoted 2 lines
drivers/gpu/drm/i915/intel_atomic.c +0 -0
  		} else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
  			/*

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#11 lore raw

Re: [PATCH 09/14] drm/i915: Set scaler mode for NV12

Quoted 83 lines

-----Original Message-----
From: Kumar, Mahesh1
Sent: Tuesday, October 10, 2017 7:24 PM
To: Srinivas, Vidya <[email protected]>; intel- [email protected]
Cc: Shankar, Uma <[email protected]>; Konduru, Chandra <[email protected]>; Kamath, Sunil <[email protected]>; Maiti, Nabendu Bikash <[email protected]>
Subject: Re: [PATCH 09/14] drm/i915: Set scaler mode for NV12

Hi,

drivers/gpu/drm/i915/intel_atomic.c int intel_atomic_setup_scalers(struct

Quoted 53 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch sets appropriate scaler mode for NV12 format. In this mode, skylake scaler does either chroma-upsampling or chroma-upsampling and resolution scaling

v2: Review comments from Ville addressed
NV12 case to be checked first for setting the scaler

v3: Rebased (me)

v4: Rebased (me)

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v6: Rebased (me)

v7: Rebased (me)

v8: Rebased (me)
Restricting the NV12 change for scaler to BXT and KBL in this series.

---
  drivers/gpu/drm/i915/i915_reg.h     | 1 +
  drivers/gpu/drm/i915/intel_atomic.c | 8 +++++++-
  2 files changed, 8 insertions(+), 1 deletion(-)
(quoted diff) +0 -0

b/drivers/gpu/drm/i915/i915_reg.h index 50e65c9..976b501 100644

drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -6607,6 +6607,7 @@ enum {
  #define PS_SCALER_MODE_MASK (3 << 28)
  #define PS_SCALER_MODE_DYN  (0 << 28)
  #define PS_SCALER_MODE_HQ  (1 << 28)
+#define PS_SCALER_MODE_NV12 (2 << 28)
  #define PS_PLANE_SEL_MASK  (7 << 25)
  #define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
  #define PS_FILTER_MASK         (3 << 23)
drivers/gpu/drm/i915/intel_atomic.c +0 -0
index 36d4e63..606b5e3 100644
@@ -325,7 +325,13 @@ int intel_atomic_setup_scalers(struct

drm_i915_private *dev_priv,

drivers/gpu/drm/i915/intel_atomic.c int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,

Quoted 4 lines
drivers/gpu/drm/i915/intel_atomic.c +0 -1
  		}
 
  		/* set scaler mode */
-		if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv))

{

drivers/gpu/drm/i915/intel_atomic.c int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,

Quoted 7 lines
drivers/gpu/drm/i915/intel_atomic.c +7 -0
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			plane_state && plane_state->base.fb &&
+			plane_state->base.fb->format->format ==
+			DRM_FORMAT_NV12) {
+			scaler_state->scalers[*scaler_id].mode =
+				PS_SCALER_MODE_NV12;
+		} else if (IS_GEMINILAKE(dev_priv) ||

IS_CANNONLAKE(dev_priv)) {

Quoted 7 lines

drivers/gpu/drm/i915/intel_atomic.c int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv, · line 335

Quoted 1 line
drivers/gpu/drm/i915/intel_atomic.c +0 -0
  			scaler_state->scalers[*scaler_id].mode = 0;

IN CNL for NV12 (planar formats) bit 29 of PS_CTRL register should be set to 1b. This require respective change in skylake_update_primary_plane & skl_update_plane as well.
please take care of that.
better like plane_ctl calculate ps_ctl in advance only & write during plane_update.

Thank you. I tested the series currently only on BXT APL and the patches were also tested by other teams on KBL. That’s why did not add changes for other platforms yet. Was planning to add them as enhancement.

Quoted 5 lines

-Mahesh

drivers/gpu/drm/i915/intel_atomic.c int intel_atomic_setup_scalers(struct · line 336

Quoted 1 line
drivers/gpu/drm/i915/intel_atomic.c +0 -0
  		} else if (num_scalers_need == 1 && intel_crtc->pipe !=

PIPE_C) {

Quoted 1 line
drivers/gpu/drm/i915/intel_atomic.c +0 -0
  			/*

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#12 lore raw

PATCH 10/14 drm/i915: Update format_is_yuv() to include NV12

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to format_is_yuv() function
for sprite planes.

v2:
-Use intel_ prefix for format_is_yuv (Ville)

v3: Rebased (me)

v4: Rebased and addressed review comments from Clinton A Taylor.
"static function in intel_sprite.c is not available to the primary plane functions".
Changed commit message - function modified for sprite planes.

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v6: Rebased (me)

v7: Rebased (me)

v8: Rebased (me)

---
 drivers/gpu/drm/i915/intel_sprite.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_sprite.c +4 -3
index b0d6e3e..091bb42 100644
@@ -42,13 +42,14 @@
 #include "i915_drv.h"
 
 static bool
-format_is_yuv(uint32_t format)
+intel_format_is_yuv(uint32_t format)
 {
 	switch (format) {
 	case DRM_FORMAT_YUYV:
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
 	case DRM_FORMAT_YVYU:
+	case DRM_FORMAT_NV12:
 		return true;
 	default:
 		return false;
@@ -330,7 +331,7 @@ void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
 	enum plane_id plane_id = plane->id;
 
 	/* Seems RGB data bypasses the CSC always */
-	if (!format_is_yuv(format))
+	if (!intel_format_is_yuv(format))
 		return;
 
 	/*
@@ -894,7 +895,7 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,
 		src_y = src->y1 >> 16;
 		src_h = drm_rect_height(src) >> 16;
 
-		if (format_is_yuv(fb->format->format)) {
+		if (intel_format_is_yuv(fb->format->format)) {
 			src_x &= ~1;
 			src_w &= ~1;
 
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#13 lore raw

PATCH 11/14 drm/i915: Upscale scaler max scale for NV12

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch updates scaler max limit support for NV12

v2: Rebased (me)

v3: Rebased (me)

v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made less convoluted by splitting it up a bit
- Indentation errors to be fixed in the series

v6: Rebased (me)
Fixed review comments from Paauwe, Bob J Previous version, where a split of calculation was done, was wrong. Fixed that issue here.

v7: Rebased (me)

v8: Rebased (me)

---
 drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++++----------
 drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
 drivers/gpu/drm/i915/intel_sprite.c  |  3 ++-
 3 files changed, 27 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_display.c +23 -10
index a10bbe8..f71a704 100644
@@ -3472,6 +3472,8 @@ static u32 skl_plane_ctl_format(uint32_t pixel_format)
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
 	case DRM_FORMAT_VYUY:
 		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
+	case DRM_FORMAT_NV12:
+		return PLANE_CTL_FORMAT_NV12;
 	default:
 		MISSING_CASE(pixel_format);
 	}
@@ -4727,7 +4729,8 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
 static int
 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
 		  unsigned int scaler_user, int *scaler_id,
-		  int src_w, int src_h, int dst_w, int dst_h)
+		  int src_w, int src_h, int dst_w, int dst_h,
+		  uint32_t pixel_format)
 {
 	struct intel_crtc_scaler_state *scaler_state =
 		&crtc_state->scaler_state;
@@ -4743,7 +4746,8 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
 	 * the 90/270 degree plane rotation cases (to match the
 	 * GTT mapping), hence no need to account for rotation here.
 	 */
-	need_scaling = src_w != dst_w || src_h != dst_h;
+	need_scaling = src_w != dst_w || src_h != dst_h ||
+		(pixel_format == DRM_FORMAT_NV12);
 
 	if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
 		need_scaling = true;
@@ -4822,7 +4826,7 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state)
 	return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
 		&state->scaler_state.scaler_id,
 		state->pipe_src_w, state->pipe_src_h,
-		adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
+		adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay, 0);
 }
 
 /**
@@ -4852,7 +4856,8 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
 				drm_rect_width(&plane_state->base.src) >> 16,
 				drm_rect_height(&plane_state->base.src) >> 16,
 				drm_rect_width(&plane_state->base.dst),
-				drm_rect_height(&plane_state->base.dst));
+				drm_rect_height(&plane_state->base.dst),
+				fb ? fb->format->format : 0);
 
 	if (ret || plane_state->scaler_id < 0)
 		return ret;
@@ -4878,6 +4883,7 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
 	case DRM_FORMAT_YVYU:
 	case DRM_FORMAT_UYVY:
 	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_NV12:
 		break;
 	default:
 		DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
@@ -12799,11 +12805,12 @@ static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
 }
 
 int
-skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
+skl_max_scale(struct intel_crtc *intel_crtc,
+	struct intel_crtc_state *crtc_state, uint32_t pixel_format)
 {
 	struct drm_i915_private *dev_priv;
-	int max_scale;
-	int crtc_clock, max_dotclk;
+	int max_scale, mult;
+	int crtc_clock, max_dotclk, tmpclk1, tmpclk2;
 
 	if (!intel_crtc || !crtc_state->base.enable)
 		return DRM_PLANE_HELPER_NO_SCALING;
@@ -12825,8 +12832,10 @@ static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
 	 *            or
 	 *    cdclk/crtc_clock
 	 */
-	max_scale = min((1 << 16) * 3 - 1,
-			(1 << 8) * ((max_dotclk << 8) / crtc_clock));
+	mult = pixel_format == DRM_FORMAT_NV12 ? 2 : 3;
+	tmpclk1 = (1 << 16) * mult - 1;
+	tmpclk2 = (1 << 8) * ((max_dotclk << 8) / crtc_clock);
+	max_scale = min(tmpclk1, tmpclk2);
 
 	return max_scale;
 }
@@ -12847,7 +12856,11 @@ static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
 		/* use scaler when colorkey is not required */
 		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 			min_scale = 1;
-			max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
+			max_scale = skl_max_scale(to_intel_crtc(crtc),
+						crtc_state,
+						state->base.fb ?
+						state->base.fb->format->format :
+						0);
 		}
 		can_position = true;
 	}
drivers/gpu/drm/i915/intel_drv.h +2 -1
index 51ae058..fd60635 100644
@@ -1490,7 +1490,8 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
 				 struct intel_crtc_state *pipe_config);
 
 int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
-int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
+int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
+	uint32_t pixel_format);
 
 static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
 {
drivers/gpu/drm/i915/intel_sprite.c +2 -1
index 091bb42..6f98bc5 100644
@@ -817,7 +817,8 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,
 		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
 			can_scale = 1;
 			min_scale = 1;
-			max_scale = skl_max_scale(crtc, crtc_state);
+			max_scale = skl_max_scale(crtc, crtc_state,
+						fb->format->format);
 		} else {
 			can_scale = 0;
 			min_scale = DRM_PLANE_HELPER_NO_SCALING;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#14 lore raw

Re: [PATCH 11/14] drm/i915: Upscale scaler max scale for NV12

Quoted 60 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch updates scaler max limit support for NV12

v2: Rebased (me)

v3: Rebased (me)

v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made less convoluted by splitting it up a bit
- Indentation errors to be fixed in the series

v6: Rebased (me)
Fixed review comments from Paauwe, Bob J Previous version, where a split of calculation was done, was wrong. Fixed that issue here.

v7: Rebased (me)

v8: Rebased (me)

---
  drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++++----------
  drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
  drivers/gpu/drm/i915/intel_sprite.c  |  3 ++-
  3 files changed, 27 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_display.c +4 -1
index a10bbe8..f71a704 100644
@@ -3472,6 +3472,8 @@ static u32 skl_plane_ctl_format(uint32_t pixel_format)
  		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
  	case DRM_FORMAT_VYUY:
  		return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
+	case DRM_FORMAT_NV12:
+		return PLANE_CTL_FORMAT_NV12;
  	default:
  		MISSING_CASE(pixel_format);
  	}
@@ -4727,7 +4729,8 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
  static int
  skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
  		  unsigned int scaler_user, int *scaler_id,
-		  int src_w, int src_h, int dst_w, int dst_h)
+		  int src_w, int src_h, int dst_w, int dst_h,
+		  uint32_t pixel_format)
  {
  	struct intel_crtc_scaler_state *scaler_state =
  		&crtc_state->scaler_state;

drivers/gpu/drm/i915/intel_display.c static void cpt_verify_modeset(struct drm_device *dev, int pipe) · line 4750

Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +2 -1
@@ -4743,7 +4746,8 @@ static void cpt_verify_modeset(struct drm_device *dev, int pipe)
  	 * the 90/270 degree plane rotation cases (to match the
  	 * GTT mapping), hence no need to account for rotation here.
  	 */
-	need_scaling = src_w != dst_w || src_h != dst_h;
+	need_scaling = src_w != dst_w || src_h != dst_h ||
+		(pixel_format == DRM_FORMAT_NV12);

IMHO keep nv12 check separate from rest of src/dst_w/h checks.

Quoted 47 lines
drivers/gpu/drm/i915/intel_display.c +8 -5
  	if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
  		need_scaling = true;
@@ -4822,7 +4826,7 @@ int skl_update_scaler_crtc(struct intel_crtc_state *state)
  	return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
  		&state->scaler_state.scaler_id,
  		state->pipe_src_w, state->pipe_src_h,
-		adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay);
+		adjusted_mode->crtc_hdisplay, adjusted_mode->crtc_vdisplay, 0);
  }
 
  /**
@@ -4852,7 +4856,8 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
  				drm_rect_width(&plane_state->base.src) >> 16,
  				drm_rect_height(&plane_state->base.src) >> 16,
  				drm_rect_width(&plane_state->base.dst),
-				drm_rect_height(&plane_state->base.dst));
+				drm_rect_height(&plane_state->base.dst),
+				fb ? fb->format->format : 0);
 
  	if (ret || plane_state->scaler_id < 0)
  		return ret;
@@ -4878,6 +4883,7 @@ static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
  	case DRM_FORMAT_YVYU:
  	case DRM_FORMAT_UYVY:
  	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_NV12:
  		break;
  	default:
  		DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
@@ -12799,11 +12805,12 @@ static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
  }
 
  int
-skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)
+skl_max_scale(struct intel_crtc *intel_crtc,
+	struct intel_crtc_state *crtc_state, uint32_t pixel_format)
  {
  	struct drm_i915_private *dev_priv;
-	int max_scale;
-	int crtc_clock, max_dotclk;
+	int max_scale, mult;
+	int crtc_clock, max_dotclk, tmpclk1, tmpclk2;
 
  	if (!intel_crtc || !crtc_state->base.enable)
  		return DRM_PLANE_HELPER_NO_SCALING;

drivers/gpu/drm/i915/intel_display.c static void add_rps_boost_after_vblank(struct drm_crtc *crtc, · line 12838

Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c +4 -2
@@ -12825,8 +12832,10 @@ static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
  	 *            or
  	 *    cdclk/crtc_clock
  	 */
-	max_scale = min((1 << 16) * 3 - 1,
-			(1 << 8) * ((max_dotclk << 8) / crtc_clock));
+	mult = pixel_format == DRM_FORMAT_NV12 ? 2 : 3;
+	tmpclk1 = (1 << 16) * mult - 1;
+	tmpclk2 = (1 << 8) * ((max_dotclk << 8) / crtc_clock);
+	max_scale = min(tmpclk1, tmpclk2);

you can optimize use of max_scale by directly returning min(tmpclk1, tmpclk2) :)

-Mahesh

Quoted 35 lines
drivers/gpu/drm/i915/intel_display.c +5 -1
  	return max_scale;
  }
@@ -12847,7 +12856,11 @@ static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
  		/* use scaler when colorkey is not required */
  		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
  			min_scale = 1;
-			max_scale = skl_max_scale(to_intel_crtc(crtc), crtc_state);
+			max_scale = skl_max_scale(to_intel_crtc(crtc),
+						crtc_state,
+						state->base.fb ?
+						state->base.fb->format->format :
+						0);
  		}
  		can_position = true;
  	}
drivers/gpu/drm/i915/intel_drv.h +2 -1
index 51ae058..fd60635 100644
@@ -1490,7 +1490,8 @@ void intel_mode_from_pipe_config(struct drm_display_mode *mode,
  				 struct intel_crtc_state *pipe_config);
 
  int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
-int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
+int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state,
+	uint32_t pixel_format);
 
  static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
  {
drivers/gpu/drm/i915/intel_sprite.c +0 -0
index 091bb42..6f98bc5 100644

drivers/gpu/drm/i915/intel_sprite.c static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state, · line 824

Quoted 9 lines
drivers/gpu/drm/i915/intel_sprite.c +2 -1
@@ -817,7 +817,8 @@ static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state,
  		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
  			can_scale = 1;
  			min_scale = 1;
-			max_scale = skl_max_scale(crtc, crtc_state);
+			max_scale = skl_max_scale(crtc, crtc_state,
+						fb->format->format);
  		} else {
  			can_scale = 0;
  			min_scale = DRM_PLANE_HELPER_NO_SCALING;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#15 lore raw

Re: [PATCH 11/14] drm/i915: Upscale scaler max scale for NV12

Quoted 147 lines

-----Original Message-----
From: Kumar, Mahesh1
Sent: Tuesday, October 10, 2017 7:35 PM
To: Srinivas, Vidya <[email protected]>; intel- [email protected]
Cc: Shankar, Uma <[email protected]>; Konduru, Chandra <[email protected]>; Kamath, Sunil <[email protected]>; Maiti, Nabendu Bikash <[email protected]>
Subject: Re: [PATCH 11/14] drm/i915: Upscale scaler max scale for NV12

Quoted 25 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch updates scaler max limit support for NV12

v2: Rebased (me)

v3: Rebased (me)

v4: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v5: Addressed review comments from Ville and rebased
- calculation of max_scale to be made less convoluted by splitting it up a bit
- Indentation errors to be fixed in the series

v6: Rebased (me)
Fixed review comments from Paauwe, Bob J Previous version, where a split of calculation was done, was wrong. Fixed that issue here.

v7: Rebased (me)

v8: Rebased (me)

Quoted 7 lines
---
  drivers/gpu/drm/i915/intel_display.c | 33 +++++++++++++++++++++++---

-------

drivers/gpu/drm/i915/intel_display.c static u32 skl_plane_ctl_format(uint32_t

Quoted 10 lines
  drivers/gpu/drm/i915/intel_drv.h     |  3 ++-
  drivers/gpu/drm/i915/intel_sprite.c  |  3 ++-
  3 files changed, 27 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/intel_display.c +0 -0
index a10bbe8..f71a704 100644
@@ -3472,6 +3472,8 @@ static u32 skl_plane_ctl_format(uint32_t

pixel_format)

drivers/gpu/drm/i915/intel_display.c static u32 skl_plane_ctl_format(uint32_t · line 3472

Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0 -0
  		return PLANE_CTL_FORMAT_YUV422 |

PLANE_CTL_YUV422_UYVY;

drivers/gpu/drm/i915/intel_display.c static u32 skl_plane_ctl_format(uint32_t · line 3474

Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c +0 -0
  	case DRM_FORMAT_VYUY:
  		return PLANE_CTL_FORMAT_YUV422 |

PLANE_CTL_YUV422_VYUY;

drivers/gpu/drm/i915/intel_display.c static void cpt_verify_modeset(struct

Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +2 -0
+	case DRM_FORMAT_NV12:
+		return PLANE_CTL_FORMAT_NV12;
  	default:
  		MISSING_CASE(pixel_format);
  	}
@@ -4727,7 +4729,8 @@ static void cpt_verify_modeset(struct

drm_device *dev, int pipe)

drivers/gpu/drm/i915/intel_display.c static void cpt_verify_modeset(struct

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +2 -1
  static int
  skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
  		  unsigned int scaler_user, int *scaler_id,
-		  int src_w, int src_h, int dst_w, int dst_h)
+		  int src_w, int src_h, int dst_w, int dst_h,
+		  uint32_t pixel_format)
  {
  	struct intel_crtc_scaler_state *scaler_state =
  		&crtc_state->scaler_state;
@@ -4743,7 +4746,8 @@ static void cpt_verify_modeset(struct

drm_device *dev, int pipe)

drivers/gpu/drm/i915/intel_display.c static void cpt_verify_modeset(struct drm_device *dev, int pipe) · line 4750

Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +2 -1
  	 * the 90/270 degree plane rotation cases (to match the
  	 * GTT mapping), hence no need to account for rotation here.
  	 */
-	need_scaling = src_w != dst_w || src_h != dst_h;
+	need_scaling = src_w != dst_w || src_h != dst_h ||
+		(pixel_format == DRM_FORMAT_NV12);

IMHO keep nv12 check separate from rest of src/dst_w/h checks.

drivers/gpu/drm/i915/intel_display.c int skl_update_scaler_crtc(struct

Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +0 -0
  	if (crtc_state->ycbcr420 && scaler_user == SKL_CRTC_INDEX)
  		need_scaling = true;
@@ -4822,7 +4826,7 @@ int skl_update_scaler_crtc(struct

intel_crtc_state *state)

drivers/gpu/drm/i915/intel_display.c int skl_update_scaler_crtc(struct · line 4826

Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0 -0
  	return skl_update_scaler(state, !state->base.active,

SKL_CRTC_INDEX,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +1 -1
  		&state->scaler_state.scaler_id,
  		state->pipe_src_w, state->pipe_src_h,
-		adjusted_mode->crtc_hdisplay, adjusted_mode-
 crtc_vdisplay);
+		adjusted_mode->crtc_hdisplay, adjusted_mode-
 crtc_vdisplay, 0);
  }

/**

drivers/gpu/drm/i915/intel_display.c +0 -0
@@ -4852,7 +4856,8 @@ static int skl_update_scaler_plane(struct

intel_crtc_state *crtc_state,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct · line 4856

Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0 -0
  				drm_rect_width(&plane_state->base.src) >>

16,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct · line 4857

Quoted 1 line
drivers/gpu/drm/i915/intel_display.c +0 -0
  				drm_rect_height(&plane_state->base.src) >>

16,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct

Quoted 8 lines
drivers/gpu/drm/i915/intel_display.c +2 -1
  				drm_rect_width(&plane_state->base.dst),
-				drm_rect_height(&plane_state->base.dst));
+				drm_rect_height(&plane_state->base.dst),
+				fb ? fb->format->format : 0);
 
  	if (ret || plane_state->scaler_id < 0)
  		return ret;
@@ -4878,6 +4883,7 @@ static int skl_update_scaler_plane(struct

intel_crtc_state *crtc_state,

drivers/gpu/drm/i915/intel_display.c static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,

Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c +1 -0
  	case DRM_FORMAT_YVYU:
  	case DRM_FORMAT_UYVY:
  	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_NV12:
  		break;
  	default:
  		DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported

scaling format

Quoted 1 line

0x%x\n", @@ -12799,11 +12805,12 @@ static void

add_rps_boost_after_vblank(struct drm_crtc *crtc,

Quoted 6 lines
  }

int
-skl_max_scale(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state)

drivers/gpu/drm/i915/intel_display.c +1 -0
+skl_max_scale(struct intel_crtc *intel_crtc,

drivers/gpu/drm/i915/intel_display.c static void add_rps_boost_after_vblank(struct drm_crtc *crtc,

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +3 -2
+	struct intel_crtc_state *crtc_state, uint32_t pixel_format)
  {
  	struct drm_i915_private *dev_priv;
-	int max_scale;
-	int crtc_clock, max_dotclk;
+	int max_scale, mult;
+	int crtc_clock, max_dotclk, tmpclk1, tmpclk2;
 
  	if (!intel_crtc || !crtc_state->base.enable)
  		return DRM_PLANE_HELPER_NO_SCALING; @@ -12825,8

+12832,10 @@

Quoted 12 lines

drivers/gpu/drm/i915/intel_display.c static void add_rps_boost_after_vblank(struct drm_crtc *crtc, · line 12838

Quoted 10 lines

static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
* or
* cdclk/crtc_clock
*/

drivers/gpu/drm/i915/intel_display.c +4 -2
-	max_scale = min((1 << 16) * 3 - 1,
-			(1 << 8) * ((max_dotclk << 8) / crtc_clock));
+	mult = pixel_format == DRM_FORMAT_NV12 ? 2 : 3;
+	tmpclk1 = (1 << 16) * mult - 1;
+	tmpclk2 = (1 << 8) * ((max_dotclk << 8) / crtc_clock);
+	max_scale = min(tmpclk1, tmpclk2);

you can optimize use of max_scale by directly returning min(tmpclk1, tmpclk2) :)

Thank you. Will add the change for next version.

Quoted 47 lines

-Mahesh

drivers/gpu/drm/i915/intel_display.c static void

Quoted 4 lines
  	return max_scale;
  }
drivers/gpu/drm/i915/intel_display.c +0 -0
@@ -12847,7 +12856,11 @@ static void

add_rps_boost_after_vblank(struct drm_crtc *crtc,

drivers/gpu/drm/i915/intel_display.c static void add_rps_boost_after_vblank(struct drm_crtc *crtc,

Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +0 -1
  		/* use scaler when colorkey is not required */
  		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
  			min_scale = 1;
-			max_scale = skl_max_scale(to_intel_crtc(crtc),

crtc_state);

drivers/gpu/drm/i915/intel_drv.h void intel_mode_from_pipe_config(struct

Quoted 15 lines
drivers/gpu/drm/i915/intel_display.c +4 -0
+			max_scale = skl_max_scale(to_intel_crtc(crtc),
+						crtc_state,
+						state->base.fb ?
+						state->base.fb->format-

format :

drivers/gpu/drm/i915/intel_display.c +1 -0
+						0);
  		}
  		can_position = true;
  	}
drivers/gpu/drm/i915/intel_drv.h +0 -0
index 51ae058..fd60635 100644
@@ -1490,7 +1490,8 @@ void intel_mode_from_pipe_config(struct

drm_display_mode *mode,

drivers/gpu/drm/i915/intel_drv.h void intel_mode_from_pipe_config(struct drm_display_mode *mode,

Quoted 6 lines
drivers/gpu/drm/i915/intel_drv.h +1 -1
  				 struct intel_crtc_state *pipe_config);
 
  int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
-int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state
 *crtc_state);
+int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state

*crtc_state,

drivers/gpu/drm/i915/intel_drv.h void intel_mode_from_pipe_config(struct drm_display_mode *mode,

Quoted 3 lines
drivers/gpu/drm/i915/intel_drv.h +1 -0
+	uint32_t pixel_format);
 
  static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state

*state)

drivers/gpu/drm/i915/intel_sprite.c static u32 g4x_sprite_ctl(const struct

Quoted 7 lines
  {
drivers/gpu/drm/i915/intel_sprite.c +0 -0
index 091bb42..6f98bc5 100644
@@ -817,7 +817,8 @@ static u32 g4x_sprite_ctl(const struct

intel_crtc_state *crtc_state,

Quoted 9 lines

drivers/gpu/drm/i915/intel_sprite.c static u32 g4x_sprite_ctl(const struct intel_crtc_state *crtc_state, · line 824

Quoted 9 lines
drivers/gpu/drm/i915/intel_sprite.c +2 -1
  		if (state->ckey.flags == I915_SET_COLORKEY_NONE) {
  			can_scale = 1;
  			min_scale = 1;
-			max_scale = skl_max_scale(crtc, crtc_state);
+			max_scale = skl_max_scale(crtc, crtc_state,
+						fb->format->format);
  		} else {
  			can_scale = 0;
  			min_scale = DRM_PLANE_HELPER_NO_SCALING;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#16 lore raw

PATCH 12/14 drm/i915: Add NV12 as supported format for primary plane

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for primary plane

v2: Rebased (Chandra Konduru)

v3: Rebased (me)

v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and added NV12 case in existing skl_primary_formats

v5: Rebased (me)

v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B Rebased (me)

v8: Rebased (me)
Modified restricting the NV12 support for both BXT and KBL.

---
 drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +24 -2
index f71a704..e551f59 100644
@@ -106,6 +106,22 @@
 	DRM_FORMAT_MOD_INVALID
 };
 
+static const uint32_t nv12_primary_formats[] = {
+	DRM_FORMAT_C8,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XRGB2101010,
+	DRM_FORMAT_XBGR2101010,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};
+
 /* Cursor formats */
 static const uint32_t intel_cursor_formats[] = {
 	DRM_FORMAT_ARGB8888,
@@ -13256,8 +13272,14 @@ static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane,
 		primary->update_plane = skylake_update_primary_plane;
 		primary->disable_plane = skylake_disable_primary_plane;
 	} else if (INTEL_GEN(dev_priv) >= 9) {
-		intel_primary_formats = skl_primary_formats;
-		num_formats = ARRAY_SIZE(skl_primary_formats);
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			((pipe == PIPE_A || pipe == PIPE_B))) {
+			intel_primary_formats = nv12_primary_formats;
+			num_formats = ARRAY_SIZE(nv12_primary_formats);
+		} else {
+			intel_primary_formats = skl_primary_formats;
+			num_formats = ARRAY_SIZE(skl_primary_formats);
+		}
 		if (pipe < PIPE_C)
 			modifiers = skl_format_modifiers_ccs;
 		else
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#17 lore raw

Re: [PATCH 12/14] drm/i915: Add NV12 as supported format for primary plane

Hi,

Quoted 62 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for primary plane

v2: Rebased (Chandra Konduru)

v3: Rebased (me)

v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and added NV12 case in existing skl_primary_formats

v5: Rebased (me)

v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B Rebased (me)

v8: Rebased (me)
Modified restricting the NV12 support for both BXT and KBL.

---
  drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++++++--
  1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +16 -0
index f71a704..e551f59 100644
@@ -106,6 +106,22 @@
  	DRM_FORMAT_MOD_INVALID
  };
 
+static const uint32_t nv12_primary_formats[] = {
+	DRM_FORMAT_C8,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XRGB2101010,
+	DRM_FORMAT_XBGR2101010,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};
+
  /* Cursor formats */
  static const uint32_t intel_cursor_formats[] = {
  	DRM_FORMAT_ARGB8888,

drivers/gpu/drm/i915/intel_display.c static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane, · line 13276

Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c +2 -2
@@ -13256,8 +13272,14 @@ static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane,
  		primary->update_plane = skylake_update_primary_plane;
  		primary->disable_plane = skylake_disable_primary_plane;
  	} else if (INTEL_GEN(dev_priv) >= 9) {
-		intel_primary_formats = skl_primary_formats;
-		num_formats = ARRAY_SIZE(skl_primary_formats);
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			((pipe == PIPE_A || pipe == PIPE_B))) {

This will add support only for BXT & KBL, what about other platforms? Please mention that as comment or update the check.

-Mahesh

drivers/gpu/drm/i915/intel_display.c static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane, · line 13285

Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c +6 -0
+			intel_primary_formats = nv12_primary_formats;
+			num_formats = ARRAY_SIZE(nv12_primary_formats);
+		} else {
+			intel_primary_formats = skl_primary_formats;
+			num_formats = ARRAY_SIZE(skl_primary_formats);
+		}
  		if (pipe < PIPE_C)
  			modifiers = skl_format_modifiers_ccs;
  		else

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#18 lore raw

Re: [PATCH 12/14] drm/i915: Add NV12 as supported format for primary plane

Quoted 67 lines · Mahesh Kumar

Hi,

Quoted 63 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for primary plane

v2: Rebased (Chandra Konduru)

v3: Rebased (me)

v4: Review comments by Ville addressed Removed the skl_primary_formats_with_nv12 and added NV12 case in existing skl_primary_formats

v5: Rebased (me)

v6: Missed the Tested-by/Reviewed-by in the previous series Adding the same to commit message in this version.

v7: Review comments by Ville addressed Restricting the NV12 for BXT and on PIPE A and B Rebased (me)

v8: Rebased (me)
    Modified restricting the NV12 support for both BXT and KBL.

---
  drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++++++--

  1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +0 -0
index f71a704..e551f59 100644
@@ -106,6 +106,22 @@

      DRM_FORMAT_MOD_INVALID
  };
  +static const uint32_t nv12_primary_formats[] = { +    DRM_FORMAT_C8,
+    DRM_FORMAT_RGB565,
+    DRM_FORMAT_XRGB8888,
+    DRM_FORMAT_XBGR8888,
+    DRM_FORMAT_ARGB8888,
+    DRM_FORMAT_ABGR8888,
+    DRM_FORMAT_XRGB2101010,
+    DRM_FORMAT_XBGR2101010,
+    DRM_FORMAT_YUYV,
+    DRM_FORMAT_YVYU,
+    DRM_FORMAT_UYVY,
+    DRM_FORMAT_VYUY,
+    DRM_FORMAT_NV12,

drivers/gpu/drm/i915/intel_display.c +2 -0
+};
+

  /* Cursor formats */
  static const uint32_t intel_cursor_formats[] = { DRM_FORMAT_ARGB8888,

drivers/gpu/drm/i915/intel_display.c +0 -0
@@ -13256,8 +13272,14 @@ static bool 
 intel_cursor_plane_format_mod_supported(struct drm_plane *plane,
           primary->update_plane = skylake_update_primary_plane;
Quoted 8 lines

drivers/gpu/drm/i915/intel_display.c static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane, · line 13276

Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +2 -2
           primary->disable_plane = skylake_disable_primary_plane;
       } else if (INTEL_GEN(dev_priv) >= 9) {
-        intel_primary_formats = skl_primary_formats;
-        num_formats = ARRAY_SIZE(skl_primary_formats);
+        if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+            ((pipe == PIPE_A || pipe == PIPE_B))) {

This will add support only for BXT & KBL, what about other platforms? Please mention that as comment or update the check.

after digging more in comments, it seems matt is suggesting there could be customer with BXT stepping < E0, which doesn't support NV12 fully. so IMO and as other suggested make is something like (!(IS_SKYLAKE(dev_priv) || IS_BXT_REVID(dev_priv, BXT_REVIC_A0, BXT_REVID_D0)) or others can comments if it should not be enabled for CFL/CNL yet?

Quoted 12 lines

-Mahesh

Quoted 9 lines
drivers/gpu/drm/i915/intel_display.c +6 -0
+            intel_primary_formats = nv12_primary_formats;
+            num_formats = ARRAY_SIZE(nv12_primary_formats);
+        } else {
+            intel_primary_formats = skl_primary_formats;
+            num_formats = ARRAY_SIZE(skl_primary_formats);
+        }
           if (pipe < PIPE_C)
               modifiers = skl_format_modifiers_ccs;

          else

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#19 lore raw

Re: [PATCH 12/14] drm/i915: Add NV12 as supported format for primary plane

In reply to Mahesh Kumar
Quoted 80 lines

-----Original Message-----
From: Kumar, Mahesh1
Sent: Tuesday, October 10, 2017 7:40 PM
To: Srinivas, Vidya <[email protected]>; intel- [email protected]
Cc: Shankar, Uma <[email protected]>; Konduru, Chandra <[email protected]>; Kamath, Sunil <[email protected]>; Maiti, Nabendu Bikash <[email protected]>
Subject: Re: [PATCH 12/14] drm/i915: Add NV12 as supported format for primary plane

Hi,

drivers/gpu/drm/i915/intel_display.c static bool

Quoted 62 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for primary plane

v2: Rebased (Chandra Konduru)

v3: Rebased (me)

v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and added NV12 case in existing skl_primary_formats

v5: Rebased (me)

v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B Rebased (me)

v8: Rebased (me)
Modified restricting the NV12 support for both BXT and KBL.

---
  drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++++++--
  1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +16 -0
index f71a704..e551f59 100644
@@ -106,6 +106,22 @@
  	DRM_FORMAT_MOD_INVALID
  };
 
+static const uint32_t nv12_primary_formats[] = {
+	DRM_FORMAT_C8,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XRGB2101010,
+	DRM_FORMAT_XBGR2101010,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};
+
  /* Cursor formats */
  static const uint32_t intel_cursor_formats[] = {
  	DRM_FORMAT_ARGB8888,
@@ -13256,8 +13272,14 @@ static bool

intel_cursor_plane_format_mod_supported(struct drm_plane *plane,

Quoted 9 lines

drivers/gpu/drm/i915/intel_display.c static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane, · line 13276

Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c +2 -2
  		primary->update_plane = skylake_update_primary_plane;
  		primary->disable_plane = skylake_disable_primary_plane;
  	} else if (INTEL_GEN(dev_priv) >= 9) {
-		intel_primary_formats = skl_primary_formats;
-		num_formats = ARRAY_SIZE(skl_primary_formats);
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			((pipe == PIPE_A || pipe == PIPE_B))) {

This will add support only for BXT & KBL, what about other platforms? Please mention that as comment or update the check.

Thank you. I tested the series currently only on BXT APL and the patches were also tested by other teams on KBL. That’s why did not add changes for other platforms yet. Was planning to add them as enhancement.

Quoted 5 lines

-Mahesh

drivers/gpu/drm/i915/intel_display.c static bool · line 13278

Quoted 2 lines
drivers/gpu/drm/i915/intel_display.c +2 -0
+			intel_primary_formats = nv12_primary_formats;
+			num_formats =

ARRAY_SIZE(nv12_primary_formats);

Quoted 7 lines

drivers/gpu/drm/i915/intel_display.c static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane, · line 13285

Quoted 7 lines
drivers/gpu/drm/i915/intel_display.c +4 -0
+		} else {
+			intel_primary_formats = skl_primary_formats;
+			num_formats = ARRAY_SIZE(skl_primary_formats);
+		}
  		if (pipe < PIPE_C)
  			modifiers = skl_format_modifiers_ccs;
  		else

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#20 lore raw

Re: [PATCH 12/14] drm/i915: Add NV12 as supported format for primary plane

In reply to Vidya Srinivas
Quoted 48 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for primary plane

v2: Rebased (Chandra Konduru)

v3: Rebased (me)

v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and added NV12 case in existing skl_primary_formats

v5: Rebased (me)

v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.

v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B Rebased (me)

v8: Rebased (me)
Modified restricting the NV12 support for both BXT and KBL.

---
 drivers/gpu/drm/i915/intel_display.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/intel_display.c +6 -0
index f71a704..e551f59 100644
@@ -106,6 +106,22 @@
 	DRM_FORMAT_MOD_INVALID
 };
 
+static const uint32_t nv12_primary_formats[] = {
+	DRM_FORMAT_C8,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,

drivers/gpu/drm/i915/intel_display.c line 124

Quoted 10 lines
drivers/gpu/drm/i915/intel_display.c +10 -0
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XRGB2101010,
+	DRM_FORMAT_XBGR2101010,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};
+

You need to extend skl_mod_supported() with a case for DRM_FORMAT_NV12 so that KMS can advertise the supported modifiers for NV12.

Kristian

Quoted 27 lines
drivers/gpu/drm/i915/intel_display.c +8 -2
 /* Cursor formats */
 static const uint32_t intel_cursor_formats[] = {
 	DRM_FORMAT_ARGB8888,
@@ -13256,8 +13272,14 @@ static bool intel_cursor_plane_format_mod_supported(struct drm_plane *plane,
 		primary->update_plane = skylake_update_primary_plane;
 		primary->disable_plane = skylake_disable_primary_plane;
 	} else if (INTEL_GEN(dev_priv) >= 9) {
-		intel_primary_formats = skl_primary_formats;
-		num_formats = ARRAY_SIZE(skl_primary_formats);
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			((pipe == PIPE_A || pipe == PIPE_B))) {
+			intel_primary_formats = nv12_primary_formats;
+			num_formats = ARRAY_SIZE(nv12_primary_formats);
+		} else {
+			intel_primary_formats = skl_primary_formats;
+			num_formats = ARRAY_SIZE(skl_primary_formats);
+		}
 		if (pipe < PIPE_C)
 			modifiers = skl_format_modifiers_ccs;
 		else
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#21 lore raw

PATCH 13/14 drm/i915: Add NV12 as supported format for sprite plane

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for sprite plane.

v2: Rebased (me)

v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats

v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version. Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series for SKL.

v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B

v7: Rebased (me)

v8: Rebased (me)
Restricting NV12 changes to BXT and KBL Restricting NV12 changes for plane 0 (overlay)

---
 drivers/gpu/drm/i915/intel_sprite.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_sprite.c +21 -3
index 6f98bc5..7e9cfe1 100644
@@ -1196,6 +1196,19 @@ static bool intel_sprite_plane_format_mod_supported(struct drm_plane *plane,
         .format_mod_supported = intel_sprite_plane_format_mod_supported,
 };
 
+static uint32_t nv12_plane_formats[] = {
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};
+
 struct intel_plane *
 intel_sprite_plane_create(struct drm_i915_private *dev_priv,
 			  enum pipe pipe, int plane)
@@ -1238,9 +1251,14 @@ struct intel_plane *
 
 		intel_plane->update_plane = skl_update_plane;
 		intel_plane->disable_plane = skl_disable_plane;
-
-		plane_formats = skl_plane_formats;
-		num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			(pipe == PIPE_A || pipe == PIPE_B) && plane == 0) {
+			plane_formats = nv12_plane_formats;
+			num_plane_formats = ARRAY_SIZE(nv12_plane_formats);
+		} else {
+			plane_formats = skl_plane_formats;
+			num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		}
 		modifiers = skl_plane_format_modifiers;
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		intel_plane->can_scale = false;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#22 lore raw

Re: [PATCH 13/14] drm/i915: Add NV12 as supported format for sprite plane

Quoted 56 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for sprite plane.

v2: Rebased (me)

v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats

v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version. Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches? Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series for SKL.

v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B

v7: Rebased (me)

v8: Rebased (me)
Restricting NV12 changes to BXT and KBL Restricting NV12 changes for plane 0 (overlay)

---
 drivers/gpu/drm/i915/intel_sprite.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_sprite.c +2 -0
index 6f98bc5..7e9cfe1 100644
@@ -1196,6 +1196,19 @@ static bool intel_sprite_plane_format_mod_supported(struct drm_plane *plane,
         .format_mod_supported = intel_sprite_plane_format_mod_supported,
 };
 
+static uint32_t nv12_plane_formats[] = {
+	DRM_FORMAT_RGB565,

drivers/gpu/drm/i915/intel_sprite.c static bool intel_sprite_plane_format_mod_supported(struct drm_plane *plane, · line 1210

Quoted 10 lines
drivers/gpu/drm/i915/intel_sprite.c +10 -0
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};

As for intel_display.c you need to extend skl_sprite_plane_format_mod_supported() with a case for DRM_FORMAT_NV12 so that KMS can advertise the supported modifiers for NV12.

Kristian

Quoted 29 lines
drivers/gpu/drm/i915/intel_sprite.c +9 -3
+
 struct intel_plane *
 intel_sprite_plane_create(struct drm_i915_private *dev_priv,
 			  enum pipe pipe, int plane)
@@ -1238,9 +1251,14 @@ struct intel_plane *
 
 		intel_plane->update_plane = skl_update_plane;
 		intel_plane->disable_plane = skl_disable_plane;
-
-		plane_formats = skl_plane_formats;
-		num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			(pipe == PIPE_A || pipe == PIPE_B) && plane == 0) {
+			plane_formats = nv12_plane_formats;
+			num_plane_formats = ARRAY_SIZE(nv12_plane_formats);
+		} else {
+			plane_formats = skl_plane_formats;
+			num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		}
 		modifiers = skl_plane_format_modifiers;
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		intel_plane->can_scale = false;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#23 lore raw

Re: [PATCH 13/14] drm/i915: Add NV12 as supported format for sprite plane

Quoted 90 lines

-----Original Message-----
From: Kristian Kristensen [mailto:[email protected]]
Sent: Tuesday, October 17, 2017 4:05 AM
To: Srinivas, Vidya <[email protected]>; intel- [email protected]
Cc: Srinivas, Vidya <[email protected]>
Subject: Re: [Intel-gfx] [PATCH 13/14] drm/i915: Add NV12 as supported format for sprite plane

Quoted 6 lines · Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 to list of supported formats for sprite plane.

v2: Rebased (me)

Quoted 7 lines

v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats

v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series

patches?

Quoted 8 lines

Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series

v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version. Addressed review comments from Clinton A Taylor "Why are we adding 10 bit RGB formats with the NV12 series

patches?

drivers/gpu/drm/i915/intel_sprite.c static bool

Quoted 31 lines

Trying to set XR30 or AB30 results in error returned even though the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series for SKL.

v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B

v7: Rebased (me)

v8: Rebased (me)
Restricting NV12 changes to BXT and KBL Restricting NV12 changes for plane 0 (overlay)

---
 drivers/gpu/drm/i915/intel_sprite.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_sprite.c +0 -0
index 6f98bc5..7e9cfe1 100644
@@ -1196,6 +1196,19 @@ static bool

intel_sprite_plane_format_mod_supported(struct drm_plane *plane,

Quoted 6 lines
drivers/gpu/drm/i915/intel_sprite.c +2 -0
         .format_mod_supported =
 intel_sprite_plane_format_mod_supported,
 };
 
+static uint32_t nv12_plane_formats[] = {
+	DRM_FORMAT_RGB565,

drivers/gpu/drm/i915/intel_sprite.c static bool intel_sprite_plane_format_mod_supported(struct drm_plane *plane, · line 1210

Quoted 10 lines
drivers/gpu/drm/i915/intel_sprite.c +10 -0
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+	DRM_FORMAT_NV12,
+};

As for intel_display.c you need to extend skl_sprite_plane_format_mod_supported() with a case for DRM_FORMAT_NV12 so that KMS can advertise the supported modifiers for NV12.

Quoted 2 lines

Kristian

Thank you. I will add this in the next version before re-floating.

Regards
Vidya

Quoted 28 lines
Quoted 6 lines
drivers/gpu/drm/i915/intel_sprite.c +1 -0
+
 struct intel_plane *
 intel_sprite_plane_create(struct drm_i915_private *dev_priv,
drivers/gpu/drm/i915/intel_sprite.c +0 -0
 			  enum pipe pipe, int plane)

drivers/gpu/drm/i915/intel_sprite.c struct intel_plane * · line 1257

Quoted 10 lines
drivers/gpu/drm/i915/intel_sprite.c +4 -3
@@ -1238,9 +1251,14 @@ struct intel_plane *
 
 		intel_plane->update_plane = skl_update_plane;
 		intel_plane->disable_plane = skl_disable_plane;
-
-		plane_formats = skl_plane_formats;
-		num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		if ((IS_BROXTON(dev_priv) || IS_KABYLAKE(dev_priv)) &&
+			(pipe == PIPE_A || pipe == PIPE_B) && plane == 0) {
+			plane_formats = nv12_plane_formats;
+			num_plane_formats =

ARRAY_SIZE(nv12_plane_formats);

drivers/gpu/drm/i915/intel_sprite.c struct intel_plane *

Quoted 3 lines
drivers/gpu/drm/i915/intel_sprite.c +3 -0
+		} else {
+			plane_formats = skl_plane_formats;
+			num_plane_formats =

ARRAY_SIZE(skl_plane_formats);

Quoted 7 lines
drivers/gpu/drm/i915/intel_sprite.c +1 -1
+		}
 		modifiers = skl_plane_format_modifiers;
 	} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 		intel_plane->can_scale = false;
--

1.9.1

Quoted 4 lines
Quoted 4 lines

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#24 lore raw

PATCH 14/14 drm/i915: Add NV12 support to intel_framebuffer_init

In reply to Vidya Srinivas

From: Chandra Konduru <[email protected]>

This patch adds NV12 as supported format
to intel_framebuffer_init and performs various checks.

v2:
-Fix an issue in checks added (Chandra Konduru)

v3: rebased (me)

v4: Review comments by Ville addressed
Added platform check for NV12 in intel_framebuffer_init Removed offset checks for NV12 case

v5: Addressed review comments by Clinton A Taylor
This NV12 support only correctly works on SKL.
Plane color space conversion is different on GLK and later platforms causing the colors to display incorrectly.
Ville's plane color space property patch series
in review will fix this issue.
- Restricted the NV12 case in intel_framebuffer_init to SKL and BXT only.

v6: Rebased (me)

v7: Addressed review comments by Ville
Restricting the NV12 to BXT for now.

v8: Rebased (me)
Restricting the NV12 changes to BXT and KBL for now.

---
 drivers/gpu/drm/i915/intel_display.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/gpu/drm/i915/intel_display.c +8 -0
index e551f59..f66a73e 100644
@@ -14071,6 +14071,14 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
 			goto err;
 		}
 		break;
+	case DRM_FORMAT_NV12:
+		if (!IS_BROXTON(dev_priv) && !IS_KABYLAKE(dev_priv)) {
+			DRM_DEBUG_KMS("unsupported pixel format: %s\n",
+		      drm_get_format_name(mode_cmd->pixel_format,
+				&format_name));
+			goto err;
+		}
+		break;
 	default:
 		DRM_DEBUG_KMS("unsupported pixel format: %s\n",
 			      drm_get_format_name(mode_cmd->pixel_format, &format_name));
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#25 lore raw

✓ Fi.CI.BAT: success for Adding NV12 support (rev3)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: Adding NV12 support (rev3)
URL : https://patchwork.freedesktop.org/series/28103/
State : success

== Summary ==

Series 28103v3 Adding NV12 support
https://patchwork.freedesktop.org/api/1.0/series/28103/revisions/3/mbox/

Test chamelium:

        Subgroup dp-crc-fast:
                pass       -> FAIL       (fi-kbl-7500u) fdo#102514
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-b:
                pass       -> DMESG-WARN (fi-byt-n2820) fdo#101705
                pass       -> DMESG-WARN (fi-skl-6700k) fdo#100367

fdo#102514 https://bugs.freedesktop.org/show_bug.cgi?id=102514
fdo#101705 https://bugs.freedesktop.org/show_bug.cgi?id=101705
fdo#100367 https://bugs.freedesktop.org/show_bug.cgi?id=100367

fi-bdw-5557u     total:289  pass:268  dwarn:0   dfail:0   fail:0   skip:21  time:448s
fi-bdw-gvtdvm    total:289  pass:265  dwarn:0   dfail:0   fail:0   skip:24  time:470s
fi-blb-e6850     total:289  pass:223  dwarn:1   dfail:0   fail:0   skip:65  time:394s
fi-bsw-n3050     total:289  pass:243  dwarn:0   dfail:0   fail:0   skip:46  time:581s
fi-bwr-2160      total:289  pass:183  dwarn:0   dfail:0   fail:0   skip:106 time:285s
fi-bxt-dsi       total:289  pass:259  dwarn:0   dfail:0   fail:0   skip:30  time:523s
fi-bxt-j4205     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:521s
fi-byt-j1900     total:289  pass:253  dwarn:1   dfail:0   fail:0   skip:35  time:533s
fi-byt-n2820     total:289  pass:249  dwarn:1   dfail:0   fail:0   skip:39  time:523s
fi-cfl-s         total:289  pass:256  dwarn:1   dfail:0   fail:0   skip:32  time:562s
fi-cnl-y         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:614s
fi-glk-1         total:289  pass:261  dwarn:0   dfail:0   fail:0   skip:28  time:602s
fi-hsw-4770      total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:440s
fi-hsw-4770r     total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:416s
fi-ilk-650       total:289  pass:228  dwarn:0   dfail:0   fail:0   skip:61  time:457s
fi-ivb-3520m     total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:508s
fi-ivb-3770      total:289  pass:260  dwarn:0   dfail:0   fail:0   skip:29  time:475s
fi-kbl-7500u     total:289  pass:263  dwarn:1   dfail:0   fail:1   skip:24  time:495s
fi-kbl-7560u     total:289  pass:270  dwarn:0   dfail:0   fail:0   skip:19  time:580s
fi-kbl-7567u     total:289  pass:265  dwarn:4   dfail:0   fail:0   skip:20  time:486s
fi-kbl-r         total:289  pass:262  dwarn:0   dfail:0   fail:0   skip:27  time:589s
fi-pnv-d510      total:289  pass:222  dwarn:1   dfail:0   fail:0   skip:66  time:662s
fi-skl-6260u     total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:475s
fi-skl-6700hq    total:289  pass:263  dwarn:0   dfail:0   fail:0   skip:26  time:656s
fi-skl-6700k     total:289  pass:264  dwarn:1   dfail:0   fail:0   skip:24  time:534s
fi-skl-6770hq    total:289  pass:269  dwarn:0   dfail:0   fail:0   skip:20  time:513s
fi-skl-gvtdvm    total:289  pass:266  dwarn:0   dfail:0   fail:0   skip:23  time:467s
fi-snb-2520m     total:289  pass:250  dwarn:0   dfail:0   fail:0   skip:39  time:576s
fi-snb-2600      total:289  pass:249  dwarn:0   dfail:0   fail:0   skip:40  time:428s

6bcaf2275e52e258c737bc355e73072640be5ac3 drm-tip: 2017y-10m-10d-10h-57m-51s UTC integration manifest 004745daefae drm/i915: Add NV12 support to intel_framebuffer_init
ae6d144a9703 drm/i915: Add NV12 as supported format for sprite plane
303ea3604085 drm/i915: Add NV12 as supported format for primary plane
df988cd8065f drm/i915: Upscale scaler max scale for NV12
f884b0667862 drm/i915: Update format_is_yuv() to include NV12
5efd04f2a779 drm/i915: Set scaler mode for NV12
3d2d6ca030cb drm/i915/skl+: nv12 workaround disable WM level 1-7
0efd0ff59025 drm/i915/skl+: make sure higher latency level has higher wm value 34929470fcbf drm/i915/skl+: pass skl_wm_level struct to wm compute func
140217bcc810 drm/i915/skl+: NV12 related changes for WM
50cfca0614bb drm/i915/skl+: support varification of DDB HW state for NV12 0de16b2f24ed drm/i915/skl+: add NV12 in skl_format_to_fourcc
72bc128ecba2 drm/i915/skl+: refactore WM calculation for NV12
205ac002dabf drm/i915/skl+: rename skl_wm_values struct to skl_ddb_values

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5971/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#26 lore raw

✓ Fi.CI.IGT: success for Adding NV12 support (rev3)

In reply to Vidya Srinivas
== Series Details ==

== Series Details ==

Series: Adding NV12 support (rev3)
URL : https://patchwork.freedesktop.org/series/28103/
State : success

== Summary ==

shard-hsw total:2552 pass:1431 dwarn:5 dfail:0 fail:13 skip:1103 time:9650s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5971/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx