Skip to contentSkip to conversation

Patch "watchdog: Revert "iTCO_wdt: all versions count down twice"" has been added to the 4.13-stable tree

PATCH [email protected] 1 participant 1 message Oct 12, 2017

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

watchdog: Revert "iTCO_wdt: all versions count down twice"

to the 4.13-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
watchdog-revert-itco_wdt-all-versions-count-down-twice.patch
and it can be found in the queue-4.13 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From fc61e83a29308601e6e8a0759e24fc8fe2122692 Mon Sep 17 00:00:00 2001

From: Wim Van Sebroeck <[email protected]>
Date: Sat, 9 Sep 2017 17:41:24 +0200
Subject: watchdog: Revert "iTCO_wdt: all versions count down twice"

From: Wim Van Sebroeck <[email protected]>

commit fc61e83a29308601e6e8a0759e24fc8fe2122692 upstream.

This reverts commit 1fccb73011ea8a5fa0c6d357c33fa29c695139ea. Reported as Bug 196509 - iTCO_wdt regression reboot before timeout expire

---
 Documentation/watchdog/watchdog-parameters.txt |    2 +-
 drivers/watchdog/iTCO_wdt.c                    |   22 ++++++++++++----------
 2 files changed, 13 insertions(+), 11 deletions(-)
Documentation/watchdog/watchdog-parameters.txt +1 -1
@@ -117,7 +117,7 @@ nowayout: Watchdog cannot be stopped onc
 -------------------------------------------------
 iTCO_wdt:
 heartbeat: Watchdog heartbeat in seconds.
-	(5<=heartbeat<=74 (TCO v1) or 1226 (TCO v2), default=30)
+	(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
drivers/watchdog/iTCO_wdt.c +12 -10
@@ -306,15 +306,16 @@ static int iTCO_wdt_ping(struct watchdog
 
 	iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
 
-	/* Reset the timeout status bit so that the timer
-	 * needs to count down twice again before rebooting */
-	outw(0x0008, TCO1_STS(p));	/* write 1 to clear bit */
-
 	/* Reload the timer by writing to the TCO Timer Counter register */
-	if (p->iTCO_version >= 2)
+	if (p->iTCO_version >= 2) {
 		outw(0x01, TCO_RLD(p));
-	else if (p->iTCO_version == 1)
+	} else if (p->iTCO_version == 1) {
+		/* Reset the timeout status bit so that the timer
+		 * needs to count down twice again before rebooting */
+		outw(0x0008, TCO1_STS(p));	/* write 1 to clear bit */
+
 		outb(0x01, TCO_RLD(p));
+	}
 
 	spin_unlock(&p->io_lock);
 	return 0;
@@ -327,8 +328,11 @@ static int iTCO_wdt_set_timeout(struct w
 	unsigned char val8;
 	unsigned int tmrval;
 
-	/* The timer counts down twice before rebooting */
-	tmrval = seconds_to_ticks(p, t) / 2;
+	tmrval = seconds_to_ticks(p, t);
+
+	/* For TCO v1 the timer counts down twice before rebooting */
+	if (p->iTCO_version == 1)
+		tmrval /= 2;
 
 	/* from the specs: */
 	/* "Values of 0h-3h are ignored and should not be attempted" */
@@ -381,8 +385,6 @@ static unsigned int iTCO_wdt_get_timelef
 		spin_lock(&p->io_lock);
 		val16 = inw(TCO_RLD(p));
 		val16 &= 0x3ff;
-		if (!(inw(TCO1_STS(p)) & 0x0008))
-			val16 += (inw(TCOv2_TMR(p)) & 0x3ff);
 		spin_unlock(&p->io_lock);
 
 		time_left = ticks_to_seconds(p, val16);

Patches currently in stable-queue which might be from [email protected] are

queue-4.13/watchdog-revert-itco_wdt-all-versions-count-down-twice.patch