Skip to contentSkip to conversation

Patch "parisc: Avoid trashing sr2 and sr3 in LWS code" has been added to the 3.18-stable tree

PATCH [email protected] 1 participant 1 message Oct 24, 2017

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

parisc: Avoid trashing sr2 and sr3 in LWS code

to the 3.18-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
parisc-avoid-trashing-sr2-and-sr3-in-lws-code.patch
and it can be found in the queue-3.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From f4125cfdb3008363137f744c101e5d76ead760ba Mon Sep 17 00:00:00 2001

From: John David Anglin <[email protected]>
Date: Fri, 28 Oct 2016 22:13:42 +0200
Subject: parisc: Avoid trashing sr2 and sr3 in LWS code

From: John David Anglin <[email protected]>

commit f4125cfdb3008363137f744c101e5d76ead760ba upstream.

There is no need to trash sr2 and sr3 in the Light-weight syscall (LWS). sr2 already points to kernel space (it's zero in userspace, otherwise syscalls wouldn't work), and since the LWS code is executed in userspace, we can simply ignore to preload sr3.

---
 arch/parisc/kernel/syscall.S |   53 +++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 29 deletions(-)
arch/parisc/kernel/syscall.S +24 -29
@@ -479,11 +479,6 @@ lws_start:
 	comiclr,>>	__NR_lws_entries, %r20, %r0
 	b,n	lws_exit_nosys
 
-	/* WARNING: Trashing sr2 and sr3 */
-	mfsp	%sr7,%r1			/* get userspace into sr3 */
-	mtsp	%r1,%sr3
-	mtsp	%r0,%sr2			/* get kernel space into sr2 */
-
 	/* Load table start */
 	ldil	L%lws_table, %r1
 	ldo	R%lws_table(%r1), %r28	/* Scratch use of r28 */
@@ -632,9 +627,9 @@ cas_action:
 	stw	%r1, 4(%sr2,%r20)
 #endif
 	/* The load and store could fail */
-1:	ldw,ma	0(%sr3,%r26), %r28
+1:	ldw,ma	0(%r26), %r28
 	sub,<>	%r28, %r25, %r0
-2:	stw,ma	%r24, 0(%sr3,%r26)
+2:	stw,ma	%r24, 0(%r26)
 	/* Free lock */
 	stw,ma	%r20, 0(%sr2,%r20)
 #if ENABLE_LWS_DEBUG
@@ -711,9 +706,9 @@ lws_compare_and_swap_2:
 	nop
 
 	/* 8bit load */
-4:	ldb	0(%sr3,%r25), %r25
+4:	ldb	0(%r25), %r25
 	b	cas2_lock_start
-5:	ldb	0(%sr3,%r24), %r24
+5:	ldb	0(%r24), %r24
 	nop
 	nop
 	nop
@@ -721,9 +716,9 @@ lws_compare_and_swap_2:
 	nop
 
 	/* 16bit load */
-6:	ldh	0(%sr3,%r25), %r25
+6:	ldh	0(%r25), %r25
 	b	cas2_lock_start
-7:	ldh	0(%sr3,%r24), %r24
+7:	ldh	0(%r24), %r24
 	nop
 	nop
 	nop
@@ -731,9 +726,9 @@ lws_compare_and_swap_2:
 	nop
 
 	/* 32bit load */
-8:	ldw	0(%sr3,%r25), %r25
+8:	ldw	0(%r25), %r25
 	b	cas2_lock_start
-9:	ldw	0(%sr3,%r24), %r24
+9:	ldw	0(%r24), %r24
 	nop
 	nop
 	nop
@@ -742,14 +737,14 @@ lws_compare_and_swap_2:
 
 	/* 64bit load */
 #ifdef CONFIG_64BIT
-10:	ldd	0(%sr3,%r25), %r25
-11:	ldd	0(%sr3,%r24), %r24
+10:	ldd	0(%r25), %r25
+11:	ldd	0(%r24), %r24
 #else
 	/* Load new value into r22/r23 - high/low */
-10:	ldw	0(%sr3,%r25), %r22
-11:	ldw	4(%sr3,%r25), %r23
+10:	ldw	0(%r25), %r22
+11:	ldw	4(%r25), %r23
 	/* Load new value into fr4 for atomic store later */
-12:	flddx	0(%sr3,%r24), %fr4
+12:	flddx	0(%r24), %fr4
 #endif
 
 cas2_lock_start:
@@ -799,30 +794,30 @@ cas2_action:
 	ldo	1(%r0),%r28
 
 	/* 8bit CAS */
-13:	ldb,ma	0(%sr3,%r26), %r29
+13:	ldb,ma	0(%r26), %r29
 	sub,=	%r29, %r25, %r0
 	b,n	cas2_end
-14:	stb,ma	%r24, 0(%sr3,%r26)
+14:	stb,ma	%r24, 0(%r26)
 	b	cas2_end
 	copy	%r0, %r28
 	nop
 	nop
 
 	/* 16bit CAS */
-15:	ldh,ma	0(%sr3,%r26), %r29
+15:	ldh,ma	0(%r26), %r29
 	sub,=	%r29, %r25, %r0
 	b,n	cas2_end
-16:	sth,ma	%r24, 0(%sr3,%r26)
+16:	sth,ma	%r24, 0(%r26)
 	b	cas2_end
 	copy	%r0, %r28
 	nop
 	nop
 
 	/* 32bit CAS */
-17:	ldw,ma	0(%sr3,%r26), %r29
+17:	ldw,ma	0(%r26), %r29
 	sub,=	%r29, %r25, %r0
 	b,n	cas2_end
-18:	stw,ma	%r24, 0(%sr3,%r26)
+18:	stw,ma	%r24, 0(%r26)
 	b	cas2_end
 	copy	%r0, %r28
 	nop
@@ -830,22 +825,22 @@ cas2_action:
 
 	/* 64bit CAS */
 #ifdef CONFIG_64BIT
-19:	ldd,ma	0(%sr3,%r26), %r29
+19:	ldd,ma	0(%r26), %r29
 	sub,*=	%r29, %r25, %r0
 	b,n	cas2_end
-20:	std,ma	%r24, 0(%sr3,%r26)
+20:	std,ma	%r24, 0(%r26)
 	copy	%r0, %r28
 #else
 	/* Compare first word */
-19:	ldw,ma	0(%sr3,%r26), %r29
+19:	ldw,ma	0(%r26), %r29
 	sub,=	%r29, %r22, %r0
 	b,n	cas2_end
 	/* Compare second word */
-20:	ldw,ma	4(%sr3,%r26), %r29
+20:	ldw,ma	4(%r26), %r29
 	sub,=	%r29, %r23, %r0
 	b,n	cas2_end
 	/* Perform the store */
-21:	fstdx	%fr4, 0(%sr3,%r26)
+21:	fstdx	%fr4, 0(%r26)
 	copy	%r0, %r28
 #endif
 

Patches currently in stable-queue which might be from [email protected] are

queue-3.18/parisc-fix-double-word-compare-and-exchange-in-lws-code-on-32-bit-kernels.patch queue-3.18/parisc-avoid-trashing-sr2-and-sr3-in-lws-code.patch