Patch "s390/disassembler: increase show_code buffer size" has been added to the 4.4-stable tree

This is a note to let you know that I've just added the patch titled

s390/disassembler: increase show_code buffer size

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
s390-disassembler-increase-show_code-buffer-size.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Vasily Gorbik <[email protected]>
Date: Wed, 15 Nov 2017 14:15:36 +0100
Subject: s390/disassembler: increase show_code buffer size

From: Vasily Gorbik <[email protected]>

commit b192571d1ae375e0bbe0aa3ccfa1a3c3704454b9 upstream.

Current buffer size of 64 is too small. objdump shows that there are instructions which would require up to 75 bytes buffer (with current formating). 128 bytes "ought to be enough for anybody".

Also replaces 8 spaces with a single tab to reduce the memory footprint.

Fixes the following KASAN finding:

BUG: KASAN: stack-out-of-bounds in number+0x3fe/0x538
Write of size 1 at addr 000000005a4a75a0 by task bash/1282

CPU: 1 PID: 1282 Comm: bash Not tainted 4.14.0+ #215
Hardware name: IBM 2964 N96 702 (z/VM 6.4.0)
Call Trace:
([<000000000011eeb6>] show_stack+0x56/0x88)
 [<0000000000e1ce1a>] dump_stack+0x15a/0x1b0
 [<00000000004e2994>] print_address_description+0xf4/0x288
 [<00000000004e2cf2>] kasan_report+0x13a/0x230
 [<0000000000e38ae6>] number+0x3fe/0x538
 [<0000000000e3dfe4>] vsnprintf+0x194/0x948
 [<0000000000e3ea42>] sprintf+0xa2/0xb8
 [<00000000001198dc>] print_insn+0x374/0x500
 [<0000000000119346>] show_code+0x4ee/0x538
 [<000000000011f234>] show_registers+0x34c/0x388
 [<000000000011f2ae>] show_regs+0x3e/0xa8
 [<000000000011f502>] die+0x1ea/0x2e8
 [<0000000000138f0e>] do_no_context+0x106/0x168
 [<0000000000139a1a>] do_protection_exception+0x4da/0x7d0
 [<0000000000e55914>] pgm_check_handler+0x16c/0x1c0
 [<000000000090639e>] sysrq_handle_crash+0x46/0x58
([<0000000000000007>] 0x7)
 [<00000000009073fa>] __handle_sysrq+0x102/0x218
 [<0000000000907c06>] write_sysrq_trigger+0xd6/0x100
 [<000000000061d67a>] proc_reg_write+0xb2/0x128
 [<0000000000520be6>] __vfs_write+0xee/0x368
 [<0000000000521222>] vfs_write+0x21a/0x278
 [<000000000052156a>] SyS_write+0xda/0x178
 [<0000000000e555cc>] system_call+0xc4/0x270

The buggy address belongs to the page:
page:000003d1016929c0 count:0 mapcount:0 mapping:          (null) index:0x0
flags: 0x0()
raw: 0000000000000000 0000000000000000 0000000000000000 ffffffff00000000
raw: 0000000000000100 0000000000000200 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 000000005a4a7480: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
 000000005a4a7500: 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 00
>000000005a4a7580: 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00
                               ^
 000000005a4a7600: 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 f8 f8
 000000005a4a7680: f2 f2 f2 f2 f2 f2 f8 f8 f2 f2 f3 f3 f3 f3 00 00
==================================================================

---
 arch/s390/kernel/dis.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -1962,7 +1962,7 @@ void show_code(struct pt_regs *regs)
 {
 	char *mode = user_mode(regs) ? "User" : "Krnl";
 	unsigned char code[64];
-	char buffer[64], *ptr;
+	char buffer[128], *ptr;
 	mm_segment_t old_fs;
 	unsigned long addr;
 	int start, end, opsize, hops, i;

@@ -2025,7 +2025,7 @@ void show_code(struct pt_regs *regs)
 		start += opsize;
 		printk(buffer);
 		ptr = buffer;
-		ptr += sprintf(ptr, "\n          ");
+		ptr += sprintf(ptr, "\n\t  ");
 		hops++;
 	}
 	printk("\n");

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/s390-disassembler-increase-show_code-buffer-size.patch