power: extend prefix match to regulator-name property
PATCH v3 1/1 power: extend prefix match to regulator-name property
This patch extends pmic_bind_children prefix matching. In addition to the node name the property regulator-name is used while trying to match prefixes. This allows assigning different drivers to regulator nodes named regulator at 1 and regulator at 10 for example.
I have discarded the idea of using other properties then regulator-name as I do not see any benefit in using property compatible or even regulator-compatible. Of course I am open to change this if there are good reasons to do so.
---
Changes in v3:
- refactoring improving code readability
Changes in v2:
- add documentation
- add a regulator to the sandbox for testing
- extend the test for the new sandbox regulator
arch/sandbox/dts/sandbox_pmic.dtsi | 6 ++++++ doc/device-tree-bindings/regulator/regulator.txt | 16 ++++++++++++++-- drivers/power/pmic/pmic-uclass.c | 11 +++++++++-- include/power/sandbox_pmic.h | 5 ++++- test/dm/regulator.c | 2 ++ 5 files changed, 35 insertions(+), 5 deletions(-)
arch/sandbox/dts/sandbox_pmic.dtsi +6 -0
@@ -75,4 +75,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + no_match_by_nodename { + regulator-name = "buck_SUPPLY_1.5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + }; };
doc/device-tree-bindings/regulator/regulator.txt +14 -2
@@ -2,7 +2,8 @@ Voltage/Current regulator Binding: The regulator devices don't use the "compatible" property. The binding is done -by the prefix of regulator node's name. Usually the pmic I/O driver will provide +by the prefix of regulator node's name, or, if this fails, by the prefix of the +regulator's "regulator-name" property. Usually the pmic I/O driver will provide the array of 'struct pmic_child_info' with the prefixes and compatible drivers. The bind is done by calling function: pmic_bind_childs(). Example drivers:
@@ -15,8 +16,19 @@ For the node name e.g.: "prefix[:alpha:]num { ... }": Example the prefix "ldo" will pass for: "ldo1", "ldo at 1", "ldoreg at 1, ... +Binding by means of the node's name is preferred. However if the node names +would produce ambiguous prefixes (like "regulator at 1" and "regualtor at 11") and you +can't or do not want to change them then binding against the "regulator-name" +property is possible. The syntax for the prefix of the "regulator-name" property +is the same as the one for the regulator's node name. +Use case: a regulator named "regulator at 1" to be bound to a driver named +"LDO_DRV" and a regulator named "regualator at 11" to be bound to an other driver +named "BOOST_DRV". Using prefix "regualtor at 1" for driver matching would load +the same driver for both regulators, hence the prefix is ambiguous. + Optional properties: -- regulator-name: a string, required by the regulator uclass +- regulator-name: a string, required by the regulator uclass, used for driver + binding if binding by node's name prefix fails - regulator-min-microvolt: a minimum allowed Voltage value - regulator-max-microvolt: a maximum allowed Voltage value - regulator-min-microamp: a minimum allowed Current value
drivers/power/pmic/pmic-uclass.c +9 -2
@@ -26,6 +26,7 @@ int pmic_bind_children(struct udevice *pmic, ofnode parent,struct driver *drv;struct udevice *child;const char *node_name; +const char *reg_name;int bind_count =0 ;ofnode node;int prefix_len;
@@ -44,8 +45,14 @@ int pmic_bind_children(struct udevice *pmic, ofnode parent,debug (" - compatible prefix: '%s'\n" , info->prefix); prefix_len =strlen (info->prefix); -if (strncmp (info->prefix, node_name, prefix_len)) -continue ; +if (strncmp (info->prefix, node_name, prefix_len)) { + reg_name =ofnode_read_string (node, +"regulator-name" ); +if (!reg_name) +continue ; +if (strncmp (info->prefix, reg_name, prefix_len)) +continue ; + } drv =lists_driver_lookup_name (info->driver);if (!drv) {
include/power/sandbox_pmic.h +4 -1
@@ -13,7 +13,7 @@#define SANDBOX_BUCK_DRIVER "sandbox_buck"#define SANDBOX_OF_BUCK_PREFIX "buck" -#define SANDBOX_BUCK_COUNT 2 +#define SANDBOX_BUCK_COUNT 3#define SANDBOX_LDO_COUNT 2/* * Sandbox PMIC registers:
@@ -109,6 +109,9 @@ enum {#define SANDBOX_BUCK1_PLATNAME "SUPPLY_1.2V"#define SANDBOX_BUCK2_DEVNAME "buck2"#define SANDBOX_BUCK2_PLATNAME "SUPPLY_3.3V" +/* BUCK3: for testing fallback regulator prefix matching during bind */ +#define SANDBOX_BUCK3_DEVNAME "no_match_by_nodename" +#define SANDBOX_BUCK3_PLATNAME "buck_SUPPLY_1.5V"/* LDO names */ #define SANDBOX_LDO1_DEVNAME "ldo1"#define SANDBOX_LDO1_PLATNAME "VDD_EMMC_1.8V"
test/dm/regulator.c +2 -0
@@ -27,6 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;enum {BUCK1 ,BUCK2 , +BUCK3 ,LDO1 ,LDO2 ,OUTPUT_COUNT ,
@@ -42,6 +43,7 @@ static const char *regulator_names[OUTPUT_COUNT][OUTPUT_NAME_COUNT] = {/* devname, platname */ { SANDBOX_BUCK1_DEVNAME, SANDBOX_BUCK1_PLATNAME }, { SANDBOX_BUCK2_DEVNAME, SANDBOX_BUCK2_PLATNAME }, + { SANDBOX_BUCK3_DEVNAME, SANDBOX_BUCK3_PLATNAME }, { SANDBOX_LDO1_DEVNAME, SANDBOX_LDO1_PLATNAME}, { SANDBOX_LDO2_DEVNAME, SANDBOX_LDO2_PLATNAME}, };
Signature · 1 line
2.7.4
PATCH v3 1/1 power: extend prefix match to regulator-name property
Quoted 20 lines · Felix Brack
This patch extends
pmic_bind_childrenprefix matching. In addition to the node name the property regulator-name is used while trying to match prefixes. This allows assigning different drivers to regulator nodes named regulator at 1 and regulator at 10 for example.
I have discarded the idea of using other properties then regulator-name as I do not see any benefit in using property compatible or even regulator-compatible. Of course I am open to change this if there are good reasons to do so.Signed-off-by Felix Brack <[email protected]>---
Changes in v3:
- refactoring improving code readabilityChanges in v2:
- add documentation
- add a regulator to the sandbox for testing
- extend the test for the new sandbox regulator
Quoted 6 lines
arch/sandbox/dts/sandbox_pmic.dtsi | 6 ++++++ doc/device-tree-bindings/regulator/regulator.txt | 16 ++++++++++++++-- drivers/power/pmic/pmic-uclass.c | 11 +++++++++-- include/power/sandbox_pmic.h | 5 ++++- test/dm/regulator.c | 2 ++ 5 files changed, 35 insertions(+), 5 deletions(-)
PATCH v3 1/1 power: extend prefix match to regulator-name property
Quoted 20 lines · Felix Brack
This patch extends
pmic_bind_childrenprefix matching. In addition to the node name the property regulator-name is used while trying to match prefixes. This allows assigning different drivers to regulator nodes named regulator at 1 and regulator at 10 for example.
I have discarded the idea of using other properties then regulator-name as I do not see any benefit in using property compatible or even regulator-compatible. Of course I am open to change this if there are good reasons to do so.Signed-off-by Felix Brack <[email protected]>---
Changes in v3:
- refactoring improving code readabilityChanges in v2:
- add documentation
- add a regulator to the sandbox for testing
- extend the test for the new sandbox regulator
Quoted 6 lines
arch/sandbox/dts/sandbox_pmic.dtsi | 6 ++++++ doc/device-tree-bindings/regulator/regulator.txt | 16 ++++++++++++++-- drivers/power/pmic/pmic-uclass.c | 11 +++++++++-- include/power/sandbox_pmic.h | 5 ++++- test/dm/regulator.c | 2 ++ 5 files changed, 35 insertions(+), 5 deletions(-)
Applied to u-boot-dm thanks!