Patch "bcache: only permit to recovery read error when cache device is clean" has been added to the 4.9-stable tree
Subsystems (2)
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is clean
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
bcache-only-permit-to-recovery-read-error-when-cache-device-is-clean.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
d59b23795933678c9638fd20c942d2b4f3cd6185Mon Sep 17 00:00:00 2001
From: Coly Li <[email protected]>
Date: Mon, 30 Oct 2017 14:46:31 -0700
Subject: bcache: only permit to recovery read error when cache device is clean
From: Coly Li <[email protected]>
commit d59b23795933678c9638fd20c942d2b4f3cd6185 upstream.
When bcache does read I/Os, for example in writeback or writethrough mode, if a read request on cache device is failed, bcache will try to recovery the request by reading from cached device. If the data on cached device is not synced with cache device, then requester will get a stale data.
For critical storage system like database, providing stale data from recovery may result an application level data corruption, which is unacceptible.
With this patch, for a failed read request in writeback or writethrough mode, recovery a recoverable read request only happens when cache device is clean. That is to say, all data on cached device is up to update.
For other cache modes in bcache, read request will never hit cached_dev_read_error(), they don't need this patch.
Please note, because cache mode can be switched arbitrarily in run time, a writethrough mode might be switched from a writeback mode. Therefore checking dc->has_data in writethrough mode still makes sense.
Changelog:
V4: Fix parens error pointed by Michael Lyle.
v3: By response from Kent Oversteet, he thinks recovering stale data is a
bug to fix, and option to permit it is unnecessary. So this version the sysfs file is removed.
v2: rename sysfs entry from allow_stale_data_on_failure to
allow_stale_data_on_failure, and fix the confusing commit log.
v1: initial patch posted.
[small change to patch comment spelling by mlyle]
--- drivers/md/bcache/request.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/md/bcache/request.c +9 -1
@@ -702,8 +702,16 @@ static void cached_dev_read_error(struct { struct search *s = container_of(cl, struct search, cl);struct bio *bio = &s->bio.bio; + struct cached_dev *dc = container_of(s->d, struct cached_dev, disk); -if (s->recoverable) { +/* +* If cache device is dirty (dc->has_dirty is non-zero), then +* recovery a failed read request from cached device may get a +* stale data back. So read failure recovery is only permitted +* when cache device is clean. +*/ +if (s->recoverable && + (dc && !atomic_read (&dc->has_dirty))) {/* Retry from the backing device: */ trace_bcache_read_retry (s->orig_bio);
Patches currently in stable-queue which might be from [email protected] are
queue-4.9/bcache-only-permit-to-recovery-read-error-when-cache-device-is-clean.patch queue-4.9/bcache-check-ca-alloc_thread-initialized-before-wake-up-it.patch
Quoted 8 lines · On 27/11/17 16:06, [email protected] wrote:
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is clean
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
Quoted 6 lines
The filename of the patch is:
bcache-only-permit-to-recovery-read-error-when-cache-device-is-clean.patch
and it can be found in the queue-4.9 subdirectory.If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Hi Greg,
This patch is an important fix for a possible data corruption issue, but it also introduces a bug that can produce read errors under certain circumstances. The issue introduced by this patch is not as severe as the issue it fixes, but can lead to e.g. upper layer fs remounting read only. In my environment upper layer handled it badly and indirectly resulted in data loss (not directly bcache's fault of course).
Michael Lyle CC'd the stable list with a follow up fix for the issue introduced by this patch, on 24th Nov, subject "bcache: recover data from backing when data is clean".
However, the followup fix is not in Linus' tree yet, only in Michael's. I guess that means you can't pick it up yet. Never-the-less I felt it important to point this out here.
thanks,
Eddie
Quoted 25 lines · Eddie Chapman
Quoted 8 lines · On 27/11/17 16:06, [email protected] wrote:
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is clean
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summaryQuoted 6 lines
The filename of the patch is:
bcache-only-permit-to-recovery-read-error-when-cache-device-is-clean.patch
and it can be found in the queue-4.9 subdirectory.If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Hi Greg,
This patch is an important fix for a possible data corruption issue, but it also introduces a bug that can produce read errors under certain circumstances. The issue introduced by this patch is not as severe as the issue it fixes, but can lead to e.g. upper layer fs remounting read only. In my environment upper layer handled it badly and indirectly resulted in data loss (not directly bcache's fault of course).
Quoted 7 lines
Michael Lyle CC'd the stable list with a follow up fix for the issue introduced by this patch, on 24th Nov, subject "bcache: recover data from backing when data is clean".
However, the followup fix is not in Linus' tree yet, only in Michael's. I guess that means you can't pick it up yet. Never-the-less I felt it important to point this out here.
It's commit e393aa2446150536929140739f09c6ecbcbea7f0 in my tree and will go upstream shortly - but yes, probably should not add this one, before both can be pulled in.
Signature · 1 line
Jens Axboe
Greg KH
maintainerQuoted 29 lines · Michael Lyle
Quoted 27 lines · Jens Axboe
Quoted 5 lines · Eddie Chapman
Quoted 4 lines · On 27/11/17 16:06, [email protected] wrote:
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is
clean
Quoted 16 lines
Hi Greg,
This patch is an important fix for a possible data corruption issue, but it also introduces a bug that can produce read errors under certain circumstances. The issue introduced by this patch is not as severe as the issue it fixes, but can lead to e.g. upper layer fs remounting read only. In my environment upper layer handled it badly and indirectly resulted in data loss (not directly bcache's fault of course).
Michael Lyle CC'd the stable list with a follow up fix for the issue introduced by this patch, on 24th Nov, subject "bcache: recover data from backing when data is clean".
However, the followup fix is not in Linus' tree yet, only in Michael's. I guess that means you can't pick it up yet. Never-the-less I felt it important to point this out here.
Quoted 6 lines
Quoted 3 lines
It's commit
e393aa2446150536929140739f09c6ecbcbea7f0in my tree and will go upstream shortly - but yes, probably should not add this one, before both can be pulled in.Thanks everyone for the quick reply on this. I agree.
Ok, I've dropped this patch from all of the stable queues for now.
thanks,
greg k-h
Greg KH
maintainerQuoted 30 lines · Greg KH
Quoted 29 lines · Michael Lyle
Quoted 27 lines · Jens Axboe
Quoted 5 lines · Eddie Chapman
Quoted 4 lines · On 27/11/17 16:06, [email protected] wrote:
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is
clean
Quoted 16 lines
Hi Greg,
This patch is an important fix for a possible data corruption issue, but it also introduces a bug that can produce read errors under certain circumstances. The issue introduced by this patch is not as severe as the issue it fixes, but can lead to e.g. upper layer fs remounting read only. In my environment upper layer handled it badly and indirectly resulted in data loss (not directly bcache's fault of course).
Michael Lyle CC'd the stable list with a follow up fix for the issue introduced by this patch, on 24th Nov, subject "bcache: recover data from backing when data is clean".
However, the followup fix is not in Linus' tree yet, only in Michael's. I guess that means you can't pick it up yet. Never-the-less I felt it important to point this out here.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
It's commit
e393aa2446150536929140739f09c6ecbcbea7f0in my tree and will go upstream shortly - but yes, probably should not add this one, before both can be pulled in.Thanks everyone for the quick reply on this. I agree.
Ok, I've dropped this patch from all of the stable queues for now.
Both now queued up, thanks.
greg k-h
Quoted 36 lines · Greg KH
Quoted 35 lines · Greg KH
Quoted 34 lines · Michael Lyle
Quoted 30 lines · Jens Axboe
Quoted 5 lines · Eddie Chapman
Quoted 4 lines · On 27/11/17 16:06, [email protected] wrote:
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is
clean
Quoted 9 lines
Hi Greg,
This patch is an important fix for a possible data corruption issue, but it also introduces a bug that can produce read errors under certain circumstances. The issue introduced by this patch is not as severe as the issue it fixes, but can lead to e.g. upper layer fs remounting read only. In my environment upper layer handled it badly and indirectly resulted in data loss (not directly bcache's fault of course).
Quoted 7 lines
Michael Lyle CC'd the stable list with a follow up fix for the issue introduced by this patch, on 24th Nov, subject "bcache: recover data from backing when data is clean".
However, the followup fix is not in Linus' tree yet, only in Michael's. I guess that means you can't pick it up yet. Never-the-less I felt it important to point this out here.
It's commit
e393aa2446150536929140739f09c6ecbcbea7f0in my tree and will go upstream shortly - but yes, probably should not add this one, before both can be pulled in.
Quoted 9 lines
Quoted 3 lines
Quoted 1 line
Thanks everyone for the quick reply on this. I agree.
Ok, I've dropped this patch from all of the stable queues for now.
Both now queued up, thanks.
greg k-h
Hi Greg,
I only see those two queued up for 4.14 and not any earlier kernels. You originally added the first patch to 3.18, 4.4 and 4.9. Are you still planning to add them both to those kernels?
thanks,
Eddie
Greg KH
maintainerQuoted 44 lines · Eddie Chapman
Quoted 43 lines · Greg KH
Quoted 30 lines · Greg KH
Quoted 29 lines · Michael Lyle
Quoted 27 lines · Jens Axboe
Quoted 5 lines · Eddie Chapman
Quoted 4 lines · On 27/11/17 16:06, [email protected] wrote:
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is
clean
Quoted 16 lines
Hi Greg,
This patch is an important fix for a possible data corruption issue, but it also introduces a bug that can produce read errors under certain circumstances. The issue introduced by this patch is not as severe as the issue it fixes, but can lead to e.g. upper layer fs remounting read only. In my environment upper layer handled it badly and indirectly resulted in data loss (not directly bcache's fault of course).
Michael Lyle CC'd the stable list with a follow up fix for the issue introduced by this patch, on 24th Nov, subject "bcache: recover data from backing when data is clean".
However, the followup fix is not in Linus' tree yet, only in Michael's. I guess that means you can't pick it up yet. Never-the-less I felt it important to point this out here.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
It's commit
e393aa2446150536929140739f09c6ecbcbea7f0in my tree and will go upstream shortly - but yes, probably should not add this one, before both can be pulled in.Thanks everyone for the quick reply on this. I agree.
Ok, I've dropped this patch from all of the stable queues for now.
Both now queued up, thanks.
Quoted 8 lines
Quoted 2 lines
greg k-h
Hi Greg,
I only see those two queued up for 4.14 and not any earlier kernels. You originally added the first patch to 3.18, 4.4 and 4.9. Are you still planning to add them both to those kernels?
Ah, I forgot about that. I'll go queue those up for the next round after these kernels are released in a day or so.
thanks,
greg k-h
Greg KH
maintainerQuoted 48 lines · Greg KH
Quoted 47 lines · Eddie Chapman
Quoted 45 lines · Greg KH
Quoted 30 lines · Greg KH
Quoted 29 lines · Michael Lyle
Quoted 27 lines · Jens Axboe
Quoted 5 lines · Eddie Chapman
Quoted 4 lines · On 27/11/17 16:06, [email protected] wrote:
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is
clean
Quoted 16 lines
Hi Greg,
This patch is an important fix for a possible data corruption issue, but it also introduces a bug that can produce read errors under certain circumstances. The issue introduced by this patch is not as severe as the issue it fixes, but can lead to e.g. upper layer fs remounting read only. In my environment upper layer handled it badly and indirectly resulted in data loss (not directly bcache's fault of course).
Michael Lyle CC'd the stable list with a follow up fix for the issue introduced by this patch, on 24th Nov, subject "bcache: recover data from backing when data is clean".
However, the followup fix is not in Linus' tree yet, only in Michael's. I guess that means you can't pick it up yet. Never-the-less I felt it important to point this out here.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
It's commit
e393aa2446150536929140739f09c6ecbcbea7f0in my tree and will go upstream shortly - but yes, probably should not add this one, before both can be pulled in.Thanks everyone for the quick reply on this. I agree.
Ok, I've dropped this patch from all of the stable queues for now.
Both now queued up, thanks.
greg k-h
Quoted 8 lines
Quoted 5 lines
Hi Greg,
I only see those two queued up for 4.14 and not any earlier kernels. You originally added the first patch to 3.18, 4.4 and 4.9. Are you still planning to add them both to those kernels?
Ah, I forgot about that. I'll go queue those up for the next round after these kernels are released in a day or so.
All now queued up.
greg k-h
Cool, thank you very much. -mpl
Quoted 61 lines · Greg KH
Quoted 48 lines · Greg KH
Quoted 47 lines · Eddie Chapman
Quoted 45 lines · Greg KH
Quoted 30 lines · Greg KH
Quoted 29 lines · Michael Lyle
Quoted 27 lines · Jens Axboe
Quoted 5 lines · Eddie Chapman
Quoted 4 lines · On 27/11/17 16:06, [email protected] wrote:
This is a note to let you know that I've just added the patch titled
bcache: only permit to recovery read error when cache device is
clean
Quoted 16 lines
Hi Greg,
This patch is an important fix for a possible data corruption issue, but it also introduces a bug that can produce read errors under certain circumstances. The issue introduced by this patch is not as severe as the issue it fixes, but can lead to e.g. upper layer fs remounting read only. In my environment upper layer handled it badly and indirectly resulted in data loss (not directly bcache's fault of course).
Michael Lyle CC'd the stable list with a follow up fix for the issue introduced by this patch, on 24th Nov, subject "bcache: recover data from backing when data is clean".
However, the followup fix is not in Linus' tree yet, only in Michael's. I guess that means you can't pick it up yet. Never-the-less I felt it important to point this out here.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
It's commit
e393aa2446150536929140739f09c6ecbcbea7f0in my tree and will go upstream shortly - but yes, probably should not add this one, before both can be pulled in.Thanks everyone for the quick reply on this. I agree.
Ok, I've dropped this patch from all of the stable queues for now.
Both now queued up, thanks.
greg k-h
Quoted 8 lines
Quoted 5 lines
Hi Greg,
I only see those two queued up for 4.14 and not any earlier kernels. You originally added the first patch to 3.18, 4.4 and 4.9. Are you still planning to add them both to those kernels?
Ah, I forgot about that. I'll go queue those up for the next round after these kernels are released in a day or so.
All now queued up.
greg k-h