hwmon: (pmbus/lm25066) Drop support for LM25063

index 3fa6bf820c88..51b32aa203a8 100644
@@ -8,11 +8,6 @@ Supported chips:
     Datasheets:
 	http://www.ti.com/lit/gpn/lm25056
 	http://www.ti.com/lit/gpn/lm25056a
-  * TI LM25063
-    Prefix: 'lm25063'
-    Addresses scanned: -
-    Datasheet:
-	To be announced
   * National Semiconductor LM25066
     Prefix: 'lm25066'
     Addresses scanned: -

@@ -42,7 +37,7 @@ Description
 -----------
 
 This driver supports hardware monitoring for National Semiconductor / TI LM25056,
-LM25063, LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
+LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring,
 Control, and Protection ICs.
 
 The driver is a client driver to the core PMBus driver. Please see

@@ -74,12 +69,8 @@ in1_input		Measured input voltage.
 in1_average		Average measured input voltage.
 in1_min			Minimum input voltage.
 in1_max			Maximum input voltage.
-in1_crit		Critical high input voltage (LM25063 only).
-in1_lcrit		Critical low input voltage (LM25063 only).
 in1_min_alarm		Input voltage low alarm.
 in1_max_alarm		Input voltage high alarm.
-in1_lcrit_alarm		Input voltage critical low alarm (LM25063 only).
-in1_crit_alarm		Input voltage critical high alarm. (LM25063 only).
 
 in2_label		"vmon"
 in2_input		Measured voltage on VAUX pin

@@ -94,16 +85,12 @@ in3_input		Measured output voltage.
 in3_average		Average measured output voltage.
 in3_min			Minimum output voltage.
 in3_min_alarm		Output voltage low alarm.
-in3_highest		Historical minimum output voltage (LM25063 only).
-in3_lowest		Historical maximum output voltage (LM25063 only).
 
 curr1_label		"iin"
 curr1_input		Measured input current.
 curr1_average		Average measured input current.
 curr1_max		Maximum input current.
-curr1_crit		Critical input current (LM25063 only).
 curr1_max_alarm		Input current high alarm.
-curr1_crit_alarm	Input current critical high alarm (LM25063 only).
 
 power1_label		"pin"
 power1_input		Measured input power.

@@ -113,11 +100,6 @@ power1_alarm		Input power alarm
 power1_input_highest	Historical maximum power.
 power1_reset_history	Write any value to reset maximum power history.
 
-power2_label		"pout". LM25063 only.
-power2_input		Measured output power.
-power2_max		Maximum output power limit.
-power2_crit		Critical output power limit.
-
 temp1_input		Measured temperature.
 temp1_max		Maximum temperature.
 temp1_crit		Critical high temperature.