patch "iio: adc: meson-saradc: fix the bit_idx of the adc_en clock" added to staging-linus
Subsystems (3)
This is a note to let you know that I've just added the patch titled
iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
to my staging git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
in the staging-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
Quoted 1 line
From
7a6b0420d2fe4ce59437bd318826fe468f0d71aeMon Sep 17 00:00:00 2001
From: Martin Blumenstingl <[email protected]>
Date: Tue, 31 Oct 2017 21:01:43 +0100
Subject: iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
Meson8 and Meson8b SoCs use the the SAR ADC gate clock provided by the MESON_SAR_ADC_REG3 register within the SAR ADC register area. According to the datasheet (and the existing MESON_SAR_ADC_REG3_CLK_EN definition) the gate is on bit 30.
The fls() function returns the last set bit, which is "bit index + 1" (fls(MESON_SAR_ADC_REG3_CLK_EN) returns 31). Fix this by switching to __ffs() which returns the first set bit, which is bit 30 in our case.
This off by one error results in the ADC not being usable on devices where the bootloader did not enable the clock.
--- drivers/iio/adc/meson_saradc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/meson_saradc.c +1 -1
@@ -600,7 +600,7 @@ static int meson_sar_adc_clk_init(struct iio_dev *indio_dev, init.num_parents =1 ; priv->clk_gate.reg = base +MESON_SAR_ADC_REG3 ; - priv->clk_gate.bit_idx =fls (MESON_SAR_ADC_REG3_CLK_EN ); + priv->clk_gate.bit_idx =__ffs (MESON_SAR_ADC_REG3_CLK_EN ); priv->clk_gate.hw.init = &init; priv->adc_clk =devm_clk_register (&indio_dev->dev, &priv->clk_gate.hw);
Signature · 1 line
2.15.1