drm/panel: refactor INNOLUX P079ZCA panel driver
Subsystems (4)
PATCH v3 1/3 drm/panel: refactor INNOLUX P079ZCA panel driver
Refactor Innolux P079ZCA panel driver, let it support multi panel.
Signed-off-by Lin Huang <[email protected]>
---
Changes in v2:
- Change regulator property name to meet the panel datasheet
Changes in v3:
- this patch only refactor P079ZCA panel to support multi panel, support P097PFG panel in another patch
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 147 ++++++++++++++++++-------- 1 file changed, 105 insertions(+), 42 deletions(-)
drivers/gpu/drm/panel/panel-innolux-p079zca.c +105 -42
@@ -20,12 +20,32 @@#include <video/mipi_display.h> +struct panel_desc { +const struct drm_display_mode *modes; +unsigned int bpc; +struct { +unsigned int width; +unsigned int height; + } size; +}; + +struct panel_desc_dsi { +struct panel_desc desc; + +unsigned long flags; +enum mipi_dsi_pixel_format format; +unsigned int lanes; +}; +struct innolux_panel {struct drm_panel base;struct mipi_dsi_device *link; +const struct panel_desc_dsi *dsi_desc;struct backlight_device *backlight; -struct regulator *supply; +struct regulator *vddi; +struct regulator *avdd; +struct regulator *avee;struct gpio_desc *enable_gpio;bool prepared;
@@ -78,9 +98,9 @@ static int innolux_panel_unprepare(struct drm_panel *panel)/* T8: 80ms - 1000ms */ msleep (80 ); - err =regulator_disable (innolux->supply); -if (err <0 ) -return err; +regulator_disable (innolux->avee); +regulator_disable (innolux->avdd); +regulator_disable (innolux->vddi); innolux->prepared = false;
@@ -97,10 +117,18 @@ static int innolux_panel_prepare(struct drm_panel *panel)gpiod_set_value_cansleep (innolux->enable_gpio,0 ); - err =regulator_enable (innolux->supply); + err =regulator_enable (innolux->vddi);if (err <0 )return err; + err =regulator_enable (innolux->avdd); +if (err <0 ) + goto disable_vddi; + + err =regulator_enable (innolux->avee); +if (err <0 ) + goto disable_avdd; +/* T2: 15ms - 1000ms */ usleep_range (15000 ,16000 );
@@ -134,12 +162,13 @@ static int innolux_panel_prepare(struct drm_panel *panel)return 0 ; poweroff: - regulator_err =regulator_disable (innolux->supply); -if (regulator_err) -DRM_DEV_ERROR (panel->dev,"failed to disable regulator: %d\n" , - regulator_err); -gpiod_set_value_cansleep (innolux->enable_gpio,0 ); +regulator_disable (innolux->avee); +disable_avdd: +regulator_disable (innolux->avdd); +disable_vddi: +regulator_disable (innolux->vddi); +return err; }
@@ -164,7 +193,7 @@ static int innolux_panel_enable(struct drm_panel *panel)return 0 ; } -static const struct drm_display_mode default_mode = { +static const struct drm_display_mode innolux_p079zca_mode = { .clock =56900 , .hdisplay =768 , .hsync_start =768 +40 ,
@@ -177,15 +206,31 @@ static const struct drm_display_mode default_mode = { .vrefresh = 60, }; +static const struct panel_desc_dsi innolux_p079zca_panel_desc = { + .desc = { + .modes = &innolux_p079zca_mode, + .bpc =8 , + .size = { + .width =120 , + .height =160 , + }, + }, + .flags =MIPI_DSI_MODE_VIDEO |MIPI_DSI_MODE_VIDEO_SYNC_PULSE | +MIPI_DSI_MODE_LPM , + .format =MIPI_DSI_FMT_RGB888 , + .lanes =4 , +}; +static int innolux_panel_get_modes (struct drm_panel *panel) {struct drm_display_mode *mode; +struct innolux_panel *innolux =to_innolux_panel (panel); +const struct drm_display_mode *m = innolux->dsi_desc->desc.modes; - mode =drm_mode_duplicate (panel->drm, &default_mode); + mode =drm_mode_duplicate (panel->drm, m);if (!mode) {DRM_DEV_ERROR (panel->drm->dev,"failed to add mode %ux%ux@%u\n" , - default_mode.hdisplay, default_mode.vdisplay, - default_mode.vrefresh); + m->hdisplay, m->vdisplay, m->vrefresh);return -ENOMEM ; }
@@ -193,9 +238,11 @@ static int innolux_panel_get_modes(struct drm_panel *panel)drm_mode_probed_add (panel->connector, mode); - panel->connector->display_info.width_mm =120 ; - panel->connector->display_info.height_mm =160 ; - panel->connector->display_info.bpc =8 ; + panel->connector->display_info.width_mm = + innolux->dsi_desc->desc.size.width; + panel->connector->display_info.height_mm = + innolux->dsi_desc->desc.size.height; + panel->connector->display_info.bpc = innolux->dsi_desc->desc.bpc;return 1 ; }
@@ -209,20 +256,36 @@ static const struct drm_panel_funcs innolux_panel_funcs = { };static const struct of_device_id innolux_of_match[] = { - { .compatible ="innolux,p079zca" , }, - { } + { .compatible ="innolux,p079zca" , + .data = &innolux_p079zca_panel_desc + }, };MODULE_DEVICE_TABLE (of, innolux_of_match); -static int innolux_panel_add (struct innolux_panel *innolux) +static int innolux_panel_add (struct mipi_dsi_device *dsi, +const struct panel_desc_dsi *desc) { -struct device *dev = &innolux->link->dev; +struct innolux_panel *innolux; +struct device *dev = &dsi->dev;struct device_node *np;int err; - innolux->supply =devm_regulator_get (dev,"power" ); -if (IS_ERR (innolux->supply)) -return PTR_ERR (innolux->supply); + innolux =devm_kzalloc (dev,sizeof (*innolux),GFP_KERNEL ); +if (!innolux) +return -ENOMEM ; + + innolux->dsi_desc = desc; + innolux->vddi =devm_regulator_get (dev,"power" ); +if (IS_ERR (innolux->vddi)) +return PTR_ERR (innolux->vddi); + + innolux->avdd =devm_regulator_get (dev,"avdd" ); +if (IS_ERR (innolux->avdd)) +return PTR_ERR (innolux->avdd); + + innolux->avee =devm_regulator_get (dev,"avee" ); +if (IS_ERR (innolux->avee)) +return PTR_ERR (innolux->avee); innolux->enable_gpio =devm_gpiod_get_optional (dev,"enable" ,GPIOD_OUT_HIGH );
@@ -243,14 +306,16 @@ static int innolux_panel_add(struct innolux_panel *innolux)drm_panel_init (&innolux->base); innolux->base.funcs = &innolux_panel_funcs; - innolux->base.dev = &innolux->link->dev; + innolux->base.dev = dev; err =drm_panel_add (&innolux->base);if (err <0 ) goto put_backlight; -return 0 ; +dev_set_drvdata (dev, innolux); + innolux->link = dsi; +return 0 ; put_backlight:put_device (&innolux->backlight->dev);
@@ -267,28 +332,25 @@ static void innolux_panel_del(struct innolux_panel *innolux)static int innolux_panel_probe (struct mipi_dsi_device *dsi) { -struct innolux_panel *innolux; -int err; - dsi->lanes =4 ; - dsi->format =MIPI_DSI_FMT_RGB888 ; - dsi->mode_flags =MIPI_DSI_MODE_VIDEO |MIPI_DSI_MODE_VIDEO_SYNC_PULSE | -MIPI_DSI_MODE_LPM ; - - innolux =devm_kzalloc (&dsi->dev,sizeof (*innolux),GFP_KERNEL ); -if (!innolux) -return -ENOMEM ; +const struct panel_desc_dsi *dsi_desc; +const struct of_device_id *id; +int err; -mipi_dsi_set_drvdata (dsi, innolux); + id =of_match_node (innolux_of_match, dsi->dev.of_node); +if (!id) +return -ENODEV ; - innolux->link = dsi; + dsi_desc = id->data; + dsi->mode_flags = dsi_desc->flags; + dsi->format = dsi_desc->format; + dsi->lanes = dsi_desc->lanes; - err =innolux_panel_add (innolux); + err =innolux_panel_add (dsi, dsi_desc);if (err <0 )return err; - err =mipi_dsi_attach (dsi); -return err; +return mipi_dsi_attach (dsi); }static int innolux_panel_remove (struct mipi_dsi_device *dsi)
@@ -326,7 +388,7 @@ static void innolux_panel_shutdown(struct mipi_dsi_device *dsi)static struct mipi_dsi_driver innolux_panel_driver = { .driver = { - .name ="panel-innolux-p079zca" , + .name ="panel-innolux-dsi" , .of_match_table = innolux_of_match, }, .probe = innolux_panel_probe,
@@ -336,5 +398,6 @@ static struct mipi_dsi_driver innolux_panel_driver = {module_mipi_dsi_driver (innolux_panel_driver);MODULE_AUTHOR ("Chris Zhong <[email protected]>" ); +MODULE_AUTHOR ("Lin Huang <[email protected]>" );MODULE_DESCRIPTION ("Innolux P079ZCA panel driver" );MODULE_LICENSE ("GPL v2" );
Signature · 1 line
2.7.4
PATCH v3 2/3 drm/panel: support Innolux P097PFG panel
Support Innolux P097PFG 9.7" 1536x2048 TFT LCD panel, it reuse the Innolux P079ZCA panel driver.
Signed-off-by Lin Huang <[email protected]>
--- drivers/gpu/drm/panel/Kconfig | 9 ++++---- drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +++++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 5 deletions(-)
drivers/gpu/drm/panel/Kconfig +4 -5
@@ -29,15 +29,14 @@ config DRM_PANEL_SIMPLE low power state. config DRM_PANEL_INNOLUX_P079ZCA - tristate "Innolux P079ZCA panel" + tristate "Innolux P079ZCA or P097PFG panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help - Say Y here if you want to enable support for Innolux P079ZCA - TFT-LCD modules. The panel has a 1024x768 resolution and uses - 24 bit RGB per pixel. It provides a MIPI DSI interface to - the host and has a built-in LED backlight. + Say Y here if you want to enable support for Innolux P079ZCA or + Innolux P097PFG panel. They provide a MIPI DSI interface to + the host and have a built-in LED backlight. config DRM_PANEL_JDI_LT070ME05000 tristate "JDI LT070ME05000 WUXGA DSI panel"
drivers/gpu/drm/panel/panel-innolux-p079zca.c +31 -0
@@ -221,6 +221,34 @@ static const struct panel_desc_dsi innolux_p079zca_panel_desc = { .lanes = 4, }; +static const struct drm_display_mode innolux_p097pfg_mode = { + .clock =220000 , + .hdisplay =1536 , + .hsync_start =1536 +100 , + .hsync_end =1536 +100 +24 , + .htotal =1536 +100 +24 +100 , + .vdisplay =2048 , + .vsync_start =2048 +18 , + .vsync_end =2048 +18 +2 , + .vtotal =2048 +18 +2 +18 , + .vrefresh =60 , +}; + +static const struct panel_desc_dsi innolux_p097pfg_panel_desc = { + .desc = { + .modes = &innolux_p097pfg_mode, + .bpc =8 , + .size = { + .width =147 , + .height =196 , + }, + }, + .flags =MIPI_DSI_MODE_VIDEO |MIPI_DSI_MODE_VIDEO_SYNC_PULSE | +MIPI_DSI_MODE_LPM , + .format =MIPI_DSI_FMT_RGB888 , + .lanes =8 , +}; +static int innolux_panel_get_modes (struct drm_panel *panel) {struct drm_display_mode *mode;
@@ -259,6 +287,9 @@ static const struct of_device_id innolux_of_match[] = { { .compatible = "innolux,p079zca", .data = &innolux_p079zca_panel_desc }, + { .compatible = "innolux,p097pfg", + .data = &innolux_p097pfg_panel_desc + } };MODULE_DEVICE_TABLE (of, innolux_of_match);
Signature · 1 line
2.7.4
PATCH v3 3/3 dt-bindings: Add INNOLUX P097PFG panel bindings
In reply to Lin HuangThe Innolux P097PFG panel is 9.7" panel with 1536X2048 resolution, it reuse P079ZCA panel driver, so improve p079ZCA dt-binding to support P097PFG.
Change-Id I8704914898fe53b734d31fbe646df8aa5fd8b30d
Signed-off-by Lin Huang <[email protected]>
--- .../devicetree/bindings/display/panel/innolux,p079zca.txt | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt +9 -2
@@ -1,13 +1,18 @@ Innolux P079ZCA 7.85" 768x1024 TFT LCD panel +Innolux P097PFG 9.7" 1536x2048 TFT LCD panel Required properties: -- compatible: should be "innolux,p079zca" +- compatible: should be should be one of the following. + -"innolux,p079zca" for Innolux 7.9" P079ZCA 768*1024 panel + -"innolux,p097pfg" for Innolux 9.7" P097PFG 1536*2048 panel - reg: DSI virtual channel of the peripheral -- power-supply: phandle of the regulator that provides the supply voltage - enable-gpios: panel enable gpio Optional properties: - backlight: phandle of the backlight device attached to the panel +- power-supply: phandle of the regulator that provides the supply voltage +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage Example:
@@ -16,6 +21,8 @@ Example: compatible = "innolux,p079zca"; reg = <0>; power-supply = <...>; + avdd-supply = <...>; + avee-supply = <...>; backlight = <&backlight>; enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; };
Signature · 1 line
2.7.4