Skip to contentSkip to conversation

Kernel is not booting.............

DISCUSSION ManojKwal 2 participants 2 messages Jan 28, 2008

lore
Share & tools
lore

ManojKwal

author
#0 lore raw

Greetings!

System details:
Board: DTSP-ARM926Ej-S(new board)
Cross-toolchain: ELDK4.1
Linux kernel: 2.6.18
u-boot: 1.1.6

I sucessfully port u-boot on board...........But when i boot the kernel it stuck in mid.........The complete log is following:

DRM-Engine # bootm 0x80000
## Booting image at 00080000 ...

   Image Name:   Linux-2.6.18-DRM
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    623896 Bytes = 609.3 kB

Load Address: 0b008000
Entry Point: 0b008000
Verifying Checksum ... OK
OK
No initrd
## Transferring control to Linux (at address 0b008000) ...

Starting kernel ...

Uncompressing Linux........................................... done, booting the kernel.

Linux version 2.6.18-DRM (khandelwal@HotelTV-Server) (gcc version 4.0.0 (DENX ELDK 4.1 4.0.0)) #34 Mon Jan 28 17:35:46 KST 2008
CPU: ARM926EJ-S [41069263] revision 3 (ARMv5TEJ), cr=00053177
Machine: DTSP
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists. Total pages: 16128
Kernel command line: root=/dev/ram0 mem=63M initrd=0xd000000,6M ramdisk=16384 console=ttyS0,38400 init=/linuxrc
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30 [cskim]:serial_dtsp_set_termios
[cskim] : [baud,quot] = 38400, 26
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 63MB = 63MB total
Memory: 56448KB available (980K code, 248K data, 68K init)-------------------------->"HERE KERNEL STUCK"

Can anybody help me? I am a beginer on this type of work

Thanks in advance!

Regards
Manoj Khandelwal
Software Engineer

Signature · 2 lines
View this message in context: http://www.nabble.com/Kernel-is-not-booting.............-tp15132032p15132032.html
Sent from the linux-kernel mailing list archive at Nabble.com.
#1 lore raw

Am Mon, 28 Jan 2008 02:13:09 -0800 (PST)
schrieb ManojKwal <[email protected]>:

Quoted 57 lines

Greetings!

System details:
Board: DTSP-ARM926Ej-S(new board)
Cross-toolchain: ELDK4.1
Linux kernel: 2.6.18
u-boot: 1.1.6

I sucessfully port u-boot on board...........But when i boot the kernel it stuck in mid.........The complete log is following:

DRM-Engine # bootm 0x80000
## Booting image at 00080000 ...

   Image Name:   Linux-2.6.18-DRM
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    623896 Bytes = 609.3 kB

Load Address: 0b008000
Entry Point: 0b008000
Verifying Checksum ... OK
OK
No initrd
## Transferring control to Linux (at address 0b008000) ...

Starting kernel ...

Uncompressing Linux........................................... done, booting the kernel.

Linux version 2.6.18-DRM (khandelwal@HotelTV-Server) (gcc version 4.0.0 (DENX ELDK 4.1 4.0.0)) #34 Mon Jan 28 17:35:46 KST 2008
CPU: ARM926EJ-S [41069263] revision 3 (ARMv5TEJ), cr=00053177
Machine: DTSP
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists. Total pages: 16128
Kernel command line: root=/dev/ram0 mem=63M initrd=0xd000000,6M ramdisk=16384 console=ttyS0,38400 init=/linuxrc
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30 [cskim]:serial_dtsp_set_termios
[cskim] : [baud,quot] = 38400, 26
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 63MB = 63MB total
Memory: 56448KB available (980K code, 248K data, 68K init)-------------------------->"HERE KERNEL STUCK"

Quoted 1 line

Can anybody help me? I am a beginer on this type of work

In general, you should post questions concerning ARM systems on the linux-arm-kernel mailing list. See http://www.arm.linux.org.uk/ for details.

And, as a hint, you should use a more descriptive subject for your mail ;-)

Hans

Quoted 9 lines

Thanks in advance!

Regards
Manoj Khandelwal
Software Engineer