Skip to contentSkip to conversation

nvme-cli: add prints of boot partition feature to show-regs

PATCH New Minwoo Im 3 participants 4 messages Dec 15, 2017 – Dec 20, 2017 NVMe

lore
Share & tools
lore

Minwoo Im

author
#0 lore raw

PATCH 1/1 nvme-cli: add prints of boot partition feature to show-regs

Add prints of Boot Partition feature.

Signed-off-by Minwoo Im <minwoo.im.dev at gmail.com>
---
 linux/nvme.h |  3 +++
 nvme-print.c | 74 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 75 insertions(+), 2 deletions(-)
linux/nvme.h +3 -0
index e21610f..984f4df 100644
@@ -112,6 +112,9 @@ enum {
 	NVME_REG_ACQ	= 0x0030,	/* Admin CQ Base Address */
 	NVME_REG_CMBLOC = 0x0038,	/* Controller Memory Buffer Location */
 	NVME_REG_CMBSZ	= 0x003c,	/* Controller Memory Buffer Size */
+	NVME_REG_BPINFO	= 0x0040,	/* Boot Partition Information */
+	NVME_REG_BPRSEL	= 0x0044,	/* Boot Partition Read Select */
+	NVME_REG_BPMBL	= 0x0048,	/* Boot Partition Memory Buffer Location */
 	NVME_REG_DBS	= 0x1000,	/* SQ 0 Tail Doorbell */
 };
nvme-print.c +72 -2

104 lines not on this page · raw message

Signature · 1 line
2.7.4
author
#1 lore raw

PATCH 1/1 nvme-cli: add prints of boot partition feature to show-regs

Quoted 3 lines · Minwoo Im

Add prints of Boot Partition feature.

Signed-off-by Minwoo Im <minwoo.im.dev at gmail.com>

Hi Keith,
Ping ?

Applied
#3 lore raw

PATCH 1/1 nvme-cli: add prints of boot partition feature to show-regs

In reply to Minwoo Im
Quoted 3 lines · Minwoo Im

Add prints of Boot Partition feature.

Signed-off-by Minwoo Im <minwoo.im.dev at gmail.com>

Applied, thanks.