Skip to contentSkip to conversation

perf tool: Return all events as auto-completions after comma

PATCH In review Jin Yao 3 participants 4 messages Dec 22, 2017 – Dec 28, 2017 perf events

lore
Share & tools
lore

Jin Yao

author
#0 lore raw

PATCH 1/1 perf tool: Return all events as auto-completions after comma

It's a follow up patch for one previous patch "perf tool: Improve bash command line auto-complete for multiple events with comma."

It fixes an issue that no events are displayed when <TAB> is directly typed after comma.

With this patch, now the result is:

root@skl:/tmp# perf stat -e cpu-cycles,<TAB>
Display all 2389 possibilities? (y or n)
alarmtimer:alarmtimer_cancel
alarmtimer:alarmtimer_fired
alarmtimer:alarmtimer_start
alarmtimer:alarmtimer_suspend
alignment-faults
arith.divider_active
BAClear_Cost
baclears.any
block:block_bio_backmerge
block:block_bio_bounce
block:block_bio_complete
block:block_bio_frontmerge
block:block_bio_queue
block:block_bio_remap
block:block_dirty_buffer
block:block_getrq
block:block_plug
block:block_rq_complete
block:block_rq_insert
block:block_rq_issue
block:block_rq_remap
block:block_rq_requeue
block:block_sleeprq
--More--

One remaining issue is that the auto-completions doesn't work well for the event with ':'. For example, clk:clk_enable.

Because ':' is set as WORDBREAK by default in bash. Need more work for this case.

---
 tools/perf/perf-completion.sh | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
tools/perf/perf-completion.sh +7 -3
index d831083..9020641 100644
@@ -183,12 +183,16 @@ __perf_main ()
 				fi
 			done
 
-			evts=${result}+$(ls /sys/bus/event_source/devices/cpu/events)
+			evts=${result}" "$(ls /sys/bus/event_source/devices/cpu/events)
 		else
-			evts=${raw_evts}+$(ls /sys/bus/event_source/devices/cpu/events)
+			evts=${raw_evts}" "$(ls /sys/bus/event_source/devices/cpu/events)
 		fi
 
-		__perfcomp_colon "$evts" "$cur1"
+		if [[ "$cur1" == , ]]; then
+			__perfcomp_colon "$evts" ""
+		else
+			__perfcomp_colon "$evts" "$cur1"
+		fi
 	else
 		# List subcommands for perf commands
 		if [[ $prev_skip_opts == @(kvm|kmem|mem|lock|sched|
Signature · 1 line
2.7.4
#1 lore raw

Em Fri, Dec 22, 2017 at 06:57:35PM +0800, Jin Yao escreveu:

Quoted 5 lines

It's a follow up patch for one previous patch "perf tool: Improve bash command line auto-complete for multiple events with comma."

It fixes an issue that no events are displayed when <TAB> is directly typed after comma.

<SNIP>

Quoted 5 lines

One remaining issue is that the auto-completions doesn't work well for the event with ':'. For example, clk:clk_enable.

Because ':' is set as WORDBREAK by default in bash. Need more work for this case.

Thanks, tested and applied.

One other thing you may want to look at:

  $ $ perf record -e cycles/<TAB>

Should present the modifiers, i.e. these:

/*
* Update according to parse-events.l
*/
static const char *config_term_names[__PARSE_EVENTS__TERM_TYPE_NR] = {

        [PARSE_EVENTS__TERM_TYPE_USER]                  = "<sysfs term>",
        [PARSE_EVENTS__TERM_TYPE_CONFIG]                = "config",
        [PARSE_EVENTS__TERM_TYPE_CONFIG1]               = "config1",
        [PARSE_EVENTS__TERM_TYPE_CONFIG2]               = "config2",
        [PARSE_EVENTS__TERM_TYPE_NAME]                  = "name",
        [PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD]         = "period",
        [PARSE_EVENTS__TERM_TYPE_SAMPLE_FREQ]           = "freq",
        [PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE]    = "branch_type",
        [PARSE_EVENTS__TERM_TYPE_TIME]                  = "time",
        [PARSE_EVENTS__TERM_TYPE_CALLGRAPH]             = "call-graph",
        [PARSE_EVENTS__TERM_TYPE_STACKSIZE]             = "stack-size",
        [PARSE_EVENTS__TERM_TYPE_NOINHERIT]             = "no-inherit",
        [PARSE_EVENTS__TERM_TYPE_INHERIT]               = "inherit",
        [PARSE_EVENTS__TERM_TYPE_MAX_STACK]             = "max-stack",
        [PARSE_EVENTS__TERM_TYPE_OVERWRITE]             = "overwrite",
        [PARSE_EVENTS__TERM_TYPE_NOOVERWRITE]           = "no-overwrite",
        [PARSE_EVENTS__TERM_TYPE_DRV_CFG]               = "driver-config",

};

:-)

- Arnaldo

author
#2 lore raw
Quoted 28 lines

One other thing you may want to look at:

   $ $ perf record -e cycles/<TAB>

Should present the modifiers, i.e. these:

/*
* Update according to parse-events.l
*/
static const char *config_term_names[__PARSE_EVENTS__TERM_TYPE_NR] = {

         [PARSE_EVENTS__TERM_TYPE_USER]                  = "<sysfs term>",
         [PARSE_EVENTS__TERM_TYPE_CONFIG]                = "config",
         [PARSE_EVENTS__TERM_TYPE_CONFIG1]               = "config1",
         [PARSE_EVENTS__TERM_TYPE_CONFIG2]               = "config2",
         [PARSE_EVENTS__TERM_TYPE_NAME]                  = "name",
         [PARSE_EVENTS__TERM_TYPE_SAMPLE_PERIOD]         = "period",
         [PARSE_EVENTS__TERM_TYPE_SAMPLE_FREQ]           = "freq",
         [PARSE_EVENTS__TERM_TYPE_BRANCH_SAMPLE_TYPE]    = "branch_type",
         [PARSE_EVENTS__TERM_TYPE_TIME]                  = "time",
         [PARSE_EVENTS__TERM_TYPE_CALLGRAPH]             = "call-graph",
         [PARSE_EVENTS__TERM_TYPE_STACKSIZE]             = "stack-size",
         [PARSE_EVENTS__TERM_TYPE_NOINHERIT]             = "no-inherit",
         [PARSE_EVENTS__TERM_TYPE_INHERIT]               = "inherit",
         [PARSE_EVENTS__TERM_TYPE_MAX_STACK]             = "max-stack",
         [PARSE_EVENTS__TERM_TYPE_OVERWRITE]             = "overwrite",
         [PARSE_EVENTS__TERM_TYPE_NOOVERWRITE]           = "no-overwrite",
         [PARSE_EVENTS__TERM_TYPE_DRV_CFG]               = "driver-config",
Quoted 6 lines

};

:-)

- Arnaldo

Hi Arnaldo,

Currently, in my understanding, the modifiers appended to an event are:

u/k/h/I/G/H/p/...

For example,
perf stat -e cycles:u

Does perf support the modifiers like "cycles/config" or "cycles/config1", or ..., "cycles/driver-config" now?

I tried some command lines but they were failed. Maybe my used format was not correct.

Or do you mean the format like "cpu/xxx"? For example, perf stat -e cpu/event=0x0e,umask=0x1,inv/ -a sleep 1

Anyway, if we want to implement the auto-completion for the modifiers, it'd better expose them by an interface (e.g. perf list --xx) rather than hardcode them in auto-completion script. That's my initial idea.

Thanks
Jin Yao

#3 lore raw

[tip:perf/core] perf tools: Return all events as auto-completions after comma

In reply to Jin Yao
perf tools: Return all events as auto-completions after comma
Commit-ID:  34c16db0f035f3f3dc50fbed03747693c12b6a5b
Gitweb:     https://git.kernel.org/tip/34c16db0f035f3f3dc50fbed03747693c12b6a5b
Author:     Jin Yao <[email protected]>
AuthorDate: Fri, 22 Dec 2017 18:57:35 +0800
Committer:  Arnaldo Carvalho de Melo <[email protected]>
CommitDate: Wed, 27 Dec 2017 12:15:59 -0300

perf tools: Return all events as auto-completions after comma

It's a follow up for one previous patch "perf tool: Improve bash command line auto-complete for multiple events with comma."

It fixes an issue that no events are displayed when <TAB> is directly typed after comma.

With this patch, now the result is:

  root@skl:/tmp# perf stat -e cpu-cycles,<TAB>
  Display all 2389 possibilities? (y or n)
  alarmtimer:alarmtimer_cancel
  alarmtimer:alarmtimer_fired
  alarmtimer:alarmtimer_start
  alarmtimer:alarmtimer_suspend
  alignment-faults
  arith.divider_active
  BAClear_Cost
  baclears.any
  block:block_bio_backmerge
  block:block_bio_bounce
  block:block_bio_complete
  block:block_bio_frontmerge
  block:block_bio_queue
  block:block_bio_remap
  block:block_dirty_buffer
  block:block_getrq
  block:block_plug
  block:block_rq_complete
  block:block_rq_insert
  block:block_rq_issue
  block:block_rq_remap
  block:block_rq_requeue
  block:block_sleeprq
  --More--

One remaining issue is that the auto-completions doesn't work well for the event with ':'. For example, clk:clk_enable.

Because ':' is set as WORDBREAK by default in bash. Need more work for this case.

---
 tools/perf/perf-completion.sh | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
tools/perf/perf-completion.sh +7 -3
index d831083..9020641 100644
@@ -183,12 +183,16 @@ __perf_main ()
 				fi
 			done
 
-			evts=${result}+$(ls /sys/bus/event_source/devices/cpu/events)
+			evts=${result}" "$(ls /sys/bus/event_source/devices/cpu/events)
 		else
-			evts=${raw_evts}+$(ls /sys/bus/event_source/devices/cpu/events)
+			evts=${raw_evts}" "$(ls /sys/bus/event_source/devices/cpu/events)
 		fi
 
-		__perfcomp_colon "$evts" "$cur1"
+		if [[ "$cur1" == , ]]; then
+			__perfcomp_colon "$evts" ""
+		else
+			__perfcomp_colon "$evts" "$cur1"
+		fi
 	else
 		# List subcommands for perf commands
 		if [[ $prev_skip_opts == @(kvm|kmem|mem|lock|sched|