dt-bindings: imx6q-pcie: Add required property for i.MX6SX
Subsystems (4)
Fabio Estevam
reviewerPATCH 1/1 dt-bindings: imx6q-pcie: Add required property for i.MX6SX
From: Fabio Estevam <[email protected]>
i.MX6SX needs a PCI 'power-domains' entry, so add it to its required properties section.
---
The i.MX6SX PCI power domain patches have been accepted by the ARM maintainer:
and they will land into 4.16.
It would be nice if this dt-bindings update could also reach 4.16.
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +1 -0
@@ -41,6 +41,7 @@ Optional properties: Additional required properties for imx6sx-pcie: - clock names: Must include the following additional entries: - "pcie_inbound_axi" +- power-domains: Must be set to a phandle pointing to the PCIE_PHY power domain Additional required properties for imx7d-pcie: - power-domains: Must be set to a phandle pointing to PCIE_PHY power domain
Signature · 1 line
2.7.4
Rob Herring
AppliedQuoted 10 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
i.MX6SX needs a PCI 'power-domains' entry, so add it to its required properties section.
Signed-off-by Fabio Estevam <[email protected]>---
The i.MX6SX PCI power domain patches have been accepted by the ARM maintainer:
Quoted 7 lines
and they will land into 4.16.
It would be nice if this dt-bindings update could also reach 4.16.
Shawn should have taken this with the rest of the series.
Applied. Next time, please send to DT list.
Rob