Skip to contentSkip to conversation

hwmon (pmbus): cffps: reset to linux-next state

PATCH Applied Eddie James 2 participants 7 messages Jan 11, 2018 – Jan 16, 2018 Hardware monitoring

lore
Share & tools
lore
#0 lore raw

cover hwmon (pmbus): cffps: reset to linux-next state

This series brings the IBM common form factor power supply driver to the commits accepted into linux-next. It also includes two changes to the pmbus core driver, also in linux-next. One is required for cffps, the other is a bug fix for pmbus page number.

Eddie James (5):
hwmon: (pmbus/core) Prevent unintentional setting of page to 0xFF
hwmon: (pmbus) cffps: Add PMBUS_SKIP_STATUS_CHECK
hwmon: (pmbus) Export pmbus device debugfs directory entry
hwmon: (pmbus) cffps: Add debugfs entries
hwmon (pmbus): cffps: Add led class device for power supply fault led

 drivers/hwmon/pmbus/ibm-cffps.c  | 288 ++++++++++++++++++++++++++++++++++++++-
 drivers/hwmon/pmbus/pmbus.h      |   7 +-
 drivers/hwmon/pmbus/pmbus_core.c |  33 +++--
 3 files changed, 310 insertions(+), 18 deletions(-)
Signature · 1 line
1.8.3.1
#1 lore raw

PATCH 1/5 hwmon: (pmbus/core) Prevent unintentional setting of page to 0xFF

The pmbus core may call read/write word data functions with a page value of -1, intending to perform the operation without setting the page. However, the read/write word data functions accept only unsigned 8-bit page numbers, and therefore cannot check for negative page number to avoid setting the page. This results in setting the page number to 0xFF. This may result in errors or undefined behavior of some devices (specifically the ir35221, which allows the page to be set to 0xFF, but some subsequent operations to read registers may fail).

Switch the pmbus_set_page page parameter to an integer and perform the check for negative page there. Make read/write functions consistent in accepting an integer page number parameter.

---
 drivers/hwmon/pmbus/pmbus.h      |  6 +++---
 drivers/hwmon/pmbus/pmbus_core.c | 25 +++++++++++--------------
 2 files changed, 14 insertions(+), 17 deletions(-)
drivers/hwmon/pmbus/pmbus.h +3 -3
index fd422cd..c028d31 100644
@@ -433,9 +433,9 @@ struct pmbus_driver_info {
 /* Function declarations */
 
 void pmbus_clear_cache(struct i2c_client *client);
-int pmbus_set_page(struct i2c_client *client, u8 page);
-int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
-int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
+int pmbus_set_page(struct i2c_client *client, int page);
+int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg);
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg, u16 word);
 int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
 int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
 int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
drivers/hwmon/pmbus/pmbus_core.c +11 -14
index c4b551b..37ab3666 100644
@@ -158,13 +158,13 @@ void pmbus_clear_cache(struct i2c_client *client)
 }
 EXPORT_SYMBOL_GPL(pmbus_clear_cache);
 
-int pmbus_set_page(struct i2c_client *client, u8 page)
+int pmbus_set_page(struct i2c_client *client, int page)
 {
 	struct pmbus_data *data = i2c_get_clientdata(client);
 	int rv = 0;
 	int newpage;
 
-	if (page == data->currpage)
+	if (page == data->currpage || page < 0)
 		return 0;
 
 	if (!(data->info->func[page] & PMBUS_PAGE_VIRTUAL)) {
@@ -195,11 +195,9 @@ int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
 {
 	int rv;
 
-	if (page >= 0) {
-		rv = pmbus_set_page(client, page);
-		if (rv < 0)
-			return rv;
-	}
+	rv = pmbus_set_page(client, page);
+	if (rv < 0)
+		return rv;
 
 	return i2c_smbus_write_byte(client, value);
 }
@@ -223,7 +221,8 @@ static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)
 	return pmbus_write_byte(client, page, value);
 }
 
-int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word)
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
+			  u16 word)
 {
 	int rv;
 
@@ -311,7 +310,7 @@ static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
 	return pmbus_write_word_data(client, page, reg, word);
 }
 
-int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg)
+int pmbus_read_word_data(struct i2c_client *client, int page, u8 reg)
 {
 	int rv;
 
@@ -384,11 +383,9 @@ int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
 {
 	int rv;
 
-	if (page >= 0) {
-		rv = pmbus_set_page(client, page);
-		if (rv < 0)
-			return rv;
-	}
+	rv = pmbus_set_page(client, page);
+	if (rv < 0)
+		return rv;
 
 	return i2c_smbus_read_byte_data(client, reg);
 }
Signature · 1 line
1.8.3.1
#2 lore raw

PATCH 2/5 hwmon: (pmbus) cffps: Add PMBUS_SKIP_STATUS_CHECK

In reply to Eddie James

This power supply device regularly fails to read VOUT_MODE due to the CML bit going high. This results in an incorrect exponent used for the voltage data, and therefore the power supply reports incorrect voltage. Work around this by setting the pmbus flag to skip the CML check.

Fixes f69316d62c70 ("hwmon: (pmbus) Add IBM Common Form Factor (CFF) ...")
---
 drivers/hwmon/pmbus/ibm-cffps.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/hwmon/pmbus/ibm-cffps.c +6 -0
index 1a6294c..3269617 100644
@@ -9,6 +9,7 @@
 
 #include <linux/device.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pmbus.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
 
@@ -116,9 +117,14 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
 	.read_word_data = ibm_cffps_read_word_data,
 };
 
+static struct pmbus_platform_data ibm_cffps_pdata = {
+	.flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
 static int ibm_cffps_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
+	client->dev.platform_data = &ibm_cffps_pdata;
 	return pmbus_do_probe(client, id, &ibm_cffps_info);
 }
 
Signature · 1 line
1.8.3.1
#3 lore raw

PATCH 3/5 hwmon: (pmbus) Export pmbus device debugfs directory entry

In reply to Eddie James

Pmbus client drivers, if they want to use debugfs, should use the same root directory as the pmbus debugfs entries are using. Therefore, export the device dentry for the pmbus client.

---
 drivers/hwmon/pmbus/pmbus.h      | 1 +
 drivers/hwmon/pmbus/pmbus_core.c | 8 ++++++++
 2 files changed, 9 insertions(+)
drivers/hwmon/pmbus/pmbus.h +1 -0
index c028d31..e32de81 100644
@@ -452,5 +452,6 @@ int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
 int pmbus_do_remove(struct i2c_client *client);
 const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
 						      *client);
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client);
 
 #endif /* PMBUS_H */
drivers/hwmon/pmbus/pmbus_core.c +8 -0
index 37ab3666..cf52820 100644
@@ -2368,6 +2368,14 @@ int pmbus_do_remove(struct i2c_client *client)
 }
 EXPORT_SYMBOL_GPL(pmbus_do_remove);
 
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	return data->debugfs;
+}
+EXPORT_SYMBOL_GPL(pmbus_get_debugfs_dir);
+
 static int __init pmbus_core_init(void)
 {
 	pmbus_debugfs_dir = debugfs_create_dir("pmbus", NULL);
Signature · 1 line
1.8.3.1
#4 lore raw

PATCH 4/5 hwmon: (pmbus) cffps: Add debugfs entries

In reply to Eddie James

Add debugfs entries for additional power supply data, including part number, serial number, FRU number, firmware revision, ccin, and the input history of the power supply. The input history is 10 minutes of input power data in the form of twenty 30-second packets. Each packet contains average and maximum power for that 30 second period.

[groeck: Fixed endianness problem]
---
 drivers/hwmon/pmbus/ibm-cffps.c | 202 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 201 insertions(+), 1 deletion(-)
drivers/hwmon/pmbus/ibm-cffps.c +201 -1
index 3269617..503f4c5 100644
@@ -7,14 +7,28 @@
  * (at your option) any later version.
  */
 
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
 #include <linux/device.h>
+#include <linux/fs.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pmbus.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 
 #include "pmbus.h"
 
+#define CFFPS_FRU_CMD				0x9A
+#define CFFPS_PN_CMD				0x9B
+#define CFFPS_SN_CMD				0x9E
+#define CFFPS_CCIN_CMD				0xBD
+#define CFFPS_FW_CMD_START			0xFA
+#define CFFPS_FW_NUM_BYTES			4
+
+#define CFFPS_INPUT_HISTORY_CMD			0xD6
+#define CFFPS_INPUT_HISTORY_SIZE		100
+
 /* STATUS_MFR_SPECIFIC bits */
 #define CFFPS_MFR_FAN_FAULT			BIT(0)
 #define CFFPS_MFR_THERMAL_FAULT			BIT(1)
@@ -25,6 +39,144 @@
 #define CFFPS_MFR_VAUX_FAULT			BIT(6)
 #define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
 
+enum {
+	CFFPS_DEBUGFS_INPUT_HISTORY = 0,
+	CFFPS_DEBUGFS_FRU,
+	CFFPS_DEBUGFS_PN,
+	CFFPS_DEBUGFS_SN,
+	CFFPS_DEBUGFS_CCIN,
+	CFFPS_DEBUGFS_FW,
+	CFFPS_DEBUGFS_NUM_ENTRIES
+};
+
+struct ibm_cffps_input_history {
+	struct mutex update_lock;
+	unsigned long last_update;
+
+	u8 byte_count;
+	u8 data[CFFPS_INPUT_HISTORY_SIZE];
+};
+
+struct ibm_cffps {
+	struct i2c_client *client;
+
+	struct ibm_cffps_input_history input_history;
+
+	int debugfs_entries[CFFPS_DEBUGFS_NUM_ENTRIES];
+};
+
+#define to_psu(x, y) container_of((x), struct ibm_cffps, debugfs_entries[(y)])
+
+static ssize_t ibm_cffps_read_input_history(struct ibm_cffps *psu,
+					    char __user *buf, size_t count,
+					    loff_t *ppos)
+{
+	int rc;
+	u8 msgbuf0[1] = { CFFPS_INPUT_HISTORY_CMD };
+	u8 msgbuf1[CFFPS_INPUT_HISTORY_SIZE + 1] = { 0 };
+	struct i2c_msg msg[2] = {
+		{
+			.addr = psu->client->addr,
+			.flags = psu->client->flags,
+			.len = 1,
+			.buf = msgbuf0,
+		}, {
+			.addr = psu->client->addr,
+			.flags = psu->client->flags | I2C_M_RD,
+			.len = CFFPS_INPUT_HISTORY_SIZE + 1,
+			.buf = msgbuf1,
+		},
+	};
+
+	if (!*ppos) {
+		mutex_lock(&psu->input_history.update_lock);
+		if (time_after(jiffies, psu->input_history.last_update + HZ)) {
+			/*
+			 * Use a raw i2c transfer, since we need more bytes
+			 * than Linux I2C supports through smbus xfr (only 32).
+			 */
+			rc = i2c_transfer(psu->client->adapter, msg, 2);
+			if (rc < 0) {
+				mutex_unlock(&psu->input_history.update_lock);
+				return rc;
+			}
+
+			psu->input_history.byte_count = msgbuf1[0];
+			memcpy(psu->input_history.data, &msgbuf1[1],
+			       CFFPS_INPUT_HISTORY_SIZE);
+			psu->input_history.last_update = jiffies;
+		}
+
+		mutex_unlock(&psu->input_history.update_lock);
+	}
+
+	return simple_read_from_buffer(buf, count, ppos,
+				       psu->input_history.data,
+				       psu->input_history.byte_count);
+}
+
+static ssize_t ibm_cffps_debugfs_op(struct file *file, char __user *buf,
+				    size_t count, loff_t *ppos)
+{
+	u8 cmd;
+	int i, rc;
+	int *idxp = file->private_data;
+	int idx = *idxp;
+	struct ibm_cffps *psu = to_psu(idxp, idx);
+	char data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+
+	switch (idx) {
+	case CFFPS_DEBUGFS_INPUT_HISTORY:
+		return ibm_cffps_read_input_history(psu, buf, count, ppos);
+	case CFFPS_DEBUGFS_FRU:
+		cmd = CFFPS_FRU_CMD;
+		break;
+	case CFFPS_DEBUGFS_PN:
+		cmd = CFFPS_PN_CMD;
+		break;
+	case CFFPS_DEBUGFS_SN:
+		cmd = CFFPS_SN_CMD;
+		break;
+	case CFFPS_DEBUGFS_CCIN:
+		rc = i2c_smbus_read_word_swapped(psu->client, CFFPS_CCIN_CMD);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 5, "%04X", rc);
+		goto done;
+	case CFFPS_DEBUGFS_FW:
+		for (i = 0; i < CFFPS_FW_NUM_BYTES; ++i) {
+			rc = i2c_smbus_read_byte_data(psu->client,
+						      CFFPS_FW_CMD_START + i);
+			if (rc < 0)
+				return rc;
+
+			snprintf(&data[i * 2], 3, "%02X", rc);
+		}
+
+		rc = i * 2;
+		goto done;
+	default:
+		return -EINVAL;
+	}
+
+	rc = i2c_smbus_read_block_data(psu->client, cmd, data);
+	if (rc < 0)
+		return rc;
+
+done:
+	data[rc] = '\n';
+	rc += 2;
+
+	return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static const struct file_operations ibm_cffps_fops = {
+	.llseek = noop_llseek,
+	.read = ibm_cffps_debugfs_op,
+	.open = simple_open,
+};
+
 static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
 				    int reg)
 {
@@ -124,8 +276,56 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
 static int ibm_cffps_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
+	int i, rc;
+	struct dentry *debugfs;
+	struct dentry *ibm_cffps_dir;
+	struct ibm_cffps *psu;
+
 	client->dev.platform_data = &ibm_cffps_pdata;
-	return pmbus_do_probe(client, id, &ibm_cffps_info);
+	rc = pmbus_do_probe(client, id, &ibm_cffps_info);
+	if (rc)
+		return rc;
+
+	/* Don't fail the probe if we can't create debugfs */
+	debugfs = pmbus_get_debugfs_dir(client);
+	if (!debugfs)
+		return 0;
+
+	ibm_cffps_dir = debugfs_create_dir(client->name, debugfs);
+	if (!ibm_cffps_dir)
+		return 0;
+
+	psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+	if (!psu)
+		return 0;
+
+	psu->client = client;
+	mutex_init(&psu->input_history.update_lock);
+	psu->input_history.last_update = jiffies - HZ;
+
+	for (i = 0; i < CFFPS_DEBUGFS_NUM_ENTRIES; ++i)
+		psu->debugfs_entries[i] = i;
+
+	debugfs_create_file("input_history", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_INPUT_HISTORY],
+			    &ibm_cffps_fops);
+	debugfs_create_file("fru", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_FRU],
+			    &ibm_cffps_fops);
+	debugfs_create_file("part_number", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_PN],
+			    &ibm_cffps_fops);
+	debugfs_create_file("serial_number", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_SN],
+			    &ibm_cffps_fops);
+	debugfs_create_file("ccin", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_CCIN],
+			    &ibm_cffps_fops);
+	debugfs_create_file("fw_version", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_FW],
+			    &ibm_cffps_fops);
+
+	return 0;
 }
 
 static const struct i2c_device_id ibm_cffps_id[] = {
Signature · 1 line
1.8.3.1
#5 lore raw

PATCH 5/5 hwmon (pmbus): cffps: Add led class device for power supply fault led

In reply to Eddie James

This power supply device doesn't correctly manage it's own fault led. Add an led class device and register it so that userspace can manage power supply fault led as necessary.

---
 drivers/hwmon/pmbus/ibm-cffps.c | 96 +++++++++++++++++++++++++++++++++++++----
 1 file changed, 88 insertions(+), 8 deletions(-)
drivers/hwmon/pmbus/ibm-cffps.c +88 -8
index 503f4c5..28757cf 100644
@@ -14,6 +14,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pmbus.h>
 #include <linux/jiffies.h>
+#include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 
@@ -25,6 +26,7 @@
 #define CFFPS_CCIN_CMD				0xBD
 #define CFFPS_FW_CMD_START			0xFA
 #define CFFPS_FW_NUM_BYTES			4
+#define CFFPS_SYS_CONFIG_CMD			0xDA
 
 #define CFFPS_INPUT_HISTORY_CMD			0xD6
 #define CFFPS_INPUT_HISTORY_SIZE		100
@@ -39,6 +41,11 @@
 #define CFFPS_MFR_VAUX_FAULT			BIT(6)
 #define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
 
+#define CFFPS_LED_BLINK				BIT(0)
+#define CFFPS_LED_ON				BIT(1)
+#define CFFPS_LED_OFF				BIT(2)
+#define CFFPS_BLINK_RATE_MS			250
+
 enum {
 	CFFPS_DEBUGFS_INPUT_HISTORY = 0,
 	CFFPS_DEBUGFS_FRU,
@@ -63,6 +70,10 @@ struct ibm_cffps {
 	struct ibm_cffps_input_history input_history;
 
 	int debugfs_entries[CFFPS_DEBUGFS_NUM_ENTRIES];
+
+	char led_name[32];
+	u8 led_state;
+	struct led_classdev led;
 };
 
 #define to_psu(x, y) container_of((x), struct ibm_cffps, debugfs_entries[(y)])
@@ -258,6 +269,69 @@ static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
 	return rc;
 }
 
+static void ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
+					 enum led_brightness brightness)
+{
+	int rc;
+	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+	if (brightness == LED_OFF) {
+		psu->led_state = CFFPS_LED_OFF;
+	} else {
+		brightness = LED_FULL;
+		if (psu->led_state != CFFPS_LED_BLINK)
+			psu->led_state = CFFPS_LED_ON;
+	}
+
+	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+				       psu->led_state);
+	if (rc < 0)
+		return;
+
+	led_cdev->brightness = brightness;
+}
+
+static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
+				   unsigned long *delay_on,
+				   unsigned long *delay_off)
+{
+	int rc;
+	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+	psu->led_state = CFFPS_LED_BLINK;
+
+	if (led_cdev->brightness == LED_OFF)
+		return 0;
+
+	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+				       CFFPS_LED_BLINK);
+	if (rc < 0)
+		return rc;
+
+	*delay_on = CFFPS_BLINK_RATE_MS;
+	*delay_off = CFFPS_BLINK_RATE_MS;
+
+	return 0;
+}
+
+static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
+{
+	int rc;
+	struct i2c_client *client = psu->client;
+	struct device *dev = &client->dev;
+
+	snprintf(psu->led_name, sizeof(psu->led_name), "%s-%02x", client->name,
+		 client->addr);
+	psu->led.name = psu->led_name;
+	psu->led.max_brightness = LED_FULL;
+	psu->led.brightness_set = ibm_cffps_led_brightness_set;
+	psu->led.blink_set = ibm_cffps_led_blink_set;
+
+	rc = devm_led_classdev_register(dev, &psu->led);
+	if (rc)
+		dev_warn(dev, "failed to register led class: %d\n", rc);
+}
+
 static struct pmbus_driver_info ibm_cffps_info = {
 	.pages = 1,
 	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
@@ -286,6 +360,20 @@ static int ibm_cffps_probe(struct i2c_client *client,
 	if (rc)
 		return rc;
 
+	/*
+	 * Don't fail the probe if there isn't enough memory for leds and
+	 * debugfs.
+	 */
+	psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+	if (!psu)
+		return 0;
+
+	psu->client = client;
+	mutex_init(&psu->input_history.update_lock);
+	psu->input_history.last_update = jiffies - HZ;
+
+	ibm_cffps_create_led_class(psu);
+
 	/* Don't fail the probe if we can't create debugfs */
 	debugfs = pmbus_get_debugfs_dir(client);
 	if (!debugfs)
@@ -295,14 +383,6 @@ static int ibm_cffps_probe(struct i2c_client *client,
 	if (!ibm_cffps_dir)
 		return 0;
 
-	psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
-	if (!psu)
-		return 0;
-
-	psu->client = client;
-	mutex_init(&psu->input_history.update_lock);
-	psu->input_history.last_update = jiffies - HZ;
-
 	for (i = 0; i < CFFPS_DEBUGFS_NUM_ENTRIES; ++i)
 		psu->debugfs_entries[i] = i;
 
Signature · 1 line
1.8.3.1
Applied
#6 lore raw
In reply to Eddie James
Quoted 11 lines · Eddie James

This series brings the IBM common form factor power supply driver to the commits accepted into linux-next. It also includes two changes to the pmbus core driver, also in linux-next. One is required for cffps, the other is a bug fix for pmbus page number.

Eddie James (5):
hwmon: (pmbus/core) Prevent unintentional setting of page to 0xFF
hwmon: (pmbus) cffps: Add PMBUS_SKIP_STATUS_CHECK
hwmon: (pmbus) Export pmbus device debugfs directory entry
hwmon: (pmbus) cffps: Add debugfs entries
hwmon (pmbus): cffps: Add led class device for power supply fault led

Merged to 4.10.

Congrats on getting these upstream first!

Cheers,

Joel