Skip to contentSkip to conversation

Staging: netlogic: platform_net.c: introduced a helper function

PATCH In review Naveen Panwar 2 participants 2 messages Jan 17, 2018 – Feb 16, 2018 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 2/2 Staging: netlogic: platform_net.c: introduced a helper function

In staging/netlogic/platform.c Refactoring the identical code used in several places for calculating the physical address of memory-mapped objects on the device.Put that into an inline helper function and use it.

Adjust the types of arguments of xlr_resource_init() - 'offset' and 'irq' are actually unsigned. The values passed to those fit into 0..2G range, so the behaviour is unchanged, but it's more consistent that way.

---
 drivers/staging/netlogic/platform_net.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/staging/netlogic/platform_net.c +11 -10
index f45b67a..2196dad 100644
@@ -76,11 +76,16 @@ static struct resource xlr_net1_res[8];
 static u32 __iomem *gmac4_addr;
 static u32 __iomem *gpio_addr;
 
-static void xlr_resource_init(struct resource *res, int offset, int irq)
+static inline phys_addr_t physaddr(u32 offset)
+{
+	return CPHYSADDR(nlm_mmio_base(offset));
+}
+
+static void xlr_resource_init(struct resource *res, u32 offset, u32 irq)
 {
 	res->name = "gmac";
 
-	res->start = CPHYSADDR(nlm_mmio_base(offset));
+	res->start = physaddr(offset);
 	res->end = res->start + 0xfff;
 	res->flags = IORESOURCE_MEM;
 
@@ -107,8 +112,7 @@ static struct platform_device *gmac_controller2_init(void *gmac0_addr)
 		.dev.platform_data = &ndata1,
 	};
 
-	gmac4_addr = ioremap(CPHYSADDR
-			(nlm_mmio_base(NETLOGIC_IO_GMAC_4_OFFSET)), 0xfff);
+	gmac4_addr = ioremap(physaddr(NETLOGIC_IO_GMAC_4_OFFSET), 0xfff);
 	ndata1.serdes_addr = gmac4_addr;
 	ndata1.pcs_addr	= gmac4_addr;
 	ndata1.mii_addr	= gmac0_addr;
@@ -134,8 +138,7 @@ static void xls_gmac_init(void)
 {
 	int mac;
 	struct platform_device *xlr_net_dev1;
-	void __iomem *gmac0_addr = ioremap(CPHYSADDR
-			(nlm_mmio_base(NETLOGIC_IO_GMAC_0_OFFSET)), 0xfff);
+	void __iomem *gmac0_addr = ioremap(physaddr(NETLOGIC_IO_GMAC_0_OFFSET), 0xfff);
 
 	static struct xlr_net_data ndata0 = {
 		.rfr_station	= FMN_STNID_GMACRFR_0,
@@ -153,8 +156,7 @@ static void xls_gmac_init(void)
 	ndata0.mii_addr	= gmac0_addr;
 
 	/* Passing GPIO base for serdes init. Only needed on sgmii ports */
-	gpio_addr = ioremap(CPHYSADDR
-			(nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET)), 0xfff);
+	gpio_addr = ioremap(physaddr(NETLOGIC_IO_GPIO_OFFSET), 0xfff);
 	ndata0.gpio_addr = gpio_addr;
 	ndata0.cpu_mask = nlm_current_node()->coremask;
 
@@ -214,8 +216,7 @@ static void xlr_gmac_init(void)
 		.id		= 0,
 		.dev.platform_data = &ndata0,
 	};
-	ndata0.mii_addr = ioremap(CPHYSADDR
-			(nlm_mmio_base(NETLOGIC_IO_GMAC_0_OFFSET)), 0xfff);
+	ndata0.mii_addr = ioremap(physaddr(NETLOGIC_IO_GMAC_0_OFFSET), 0xfff);
 
 	ndata0.cpu_mask = nlm_current_node()->coremask;
 
Signature · 1 line
2.7.4
maintainer
#1 lore raw
Quoted 5 lines · Naveen Panwar

In staging/netlogic/platform.c Refactoring the identical code used in several places for calculating the physical address of memory-mapped objects on the device.Put that into an inline helper function and use it.

Quoted 8 lines

Adjust the types of arguments of xlr_resource_init() - 'offset' and 'irq' are actually unsigned. The values passed to those fit into 0..2G range, so the behaviour is unchanged, but it's more consistent that way.

---
 drivers/staging/netlogic/platform_net.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

This patch does not apply at all :(
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel