Patch "MIPS: AR7: ensure the port type's FCR value is used" has been added to the 4.9-stable tree
Subsystems (2)
This is a note to let you know that I've just added the patch titled
MIPS: AR7: ensure the port type's FCR value is used
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mips-ar7-ensure-the-port-type-s-fcr-value-is-used.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
0a5191efe06b5103909206e4fbcff81d30283f8eMon Sep 17 00:00:00 2001
From: Jonas Gorski <[email protected]>
Date: Sun, 29 Oct 2017 16:27:21 +0100
Subject: MIPS: AR7: ensure the port type's FCR value is used
From: Jonas Gorski <[email protected]>
commit 0a5191efe06b5103909206e4fbcff81d30283f8e upstream.
Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt trigger I/F of FIFO buffers"), the port's default FCR value isn't used in serial8250_do_set_termios anymore, but copied over once in serial8250_config_port and then modified as needed.
Unfortunately, serial8250_config_port will never be called if the port is shared between kernel and userspace, and the port's flag doesn't have UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
This causes garbled output from userspace:
[ 5.220000] random: procd urandom read with 49 bits of entropy available
ers
[kee
Fix this by forcing it to be configured on boot, resulting in the expected output:
[ 5.250000] random: procd urandom read with 50 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Patchwork: https://patchwork.linux-mips.org/patch/17544/
--- arch/mips/ar7/platform.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/ar7/platform.c +1 -1
@@ -576,7 +576,7 @@ static int __init ar7_register_uarts(voi uart_port.type =PORT_AR7 ; uart_port.uartclk =clk_get_rate (bus_clk) /2 ; uart_port.iotype =UPIO_MEM32 ; - uart_port.flags =UPF_FIXED_TYPE ; + uart_port.flags =UPF_FIXED_TYPE |UPF_BOOT_AUTOCONF ; uart_port.regshift =2 ; uart_port.line =0 ;
Patches currently in stable-queue which might be from [email protected] are
queue-4.9/mips-ar7-ensure-the-port-type-s-fcr-value-is-used.patch