Skip to contentSkip to conversation

nvme-cli: add support for an abort command

PATCH New Minwoo Im 1 participant 1 message Jan 24, 2018 NVMe

lore
Share & tools
lore

Minwoo Im

author
#0 lore raw

PATCH 1/2 nvme-cli: add support for an abort command

Add support for an abort command.

sqid and cid are enough to be __u16, but declared in __u32 to check being without either or both parameters.

Signed-off-by Minwoo Im <minwoo.im.dev at gmail.com>
---
 nvme-builtin.h |  1 +
 nvme-ioctl.c   | 13 +++++++++++++
 nvme-ioctl.h   |  1 +
 nvme.c         | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 65 insertions(+)
nvme-builtin.h +1 -0
index 4adfa78..c5d14ec 100644
@@ -59,6 +59,7 @@ COMMAND_LIST(
 	ENTRY("gen-hostnqn", "Generate NVMeoF host NQN", gen_hostnqn_cmd)
 	ENTRY("dir-receive", "Submit a Directive Receive command, return results", dir_receive)
 	ENTRY("dir-send", "Submit a Directive Send command, return results", dir_send)
+	ENTRY("abort", "Submit an Abort, return results", abort_cmd)
 );
 
 #endif
nvme-ioctl.c +13 -0
index 5c900b7..e0ed8d8 100644
@@ -778,3 +778,16 @@ int nvme_dir_recv(int fd, __u32 nsid, __u16 dspec, __u8 dtype, __u8 doper,
         return err;
 }
 
+int nvme_abort(int fd, __u16 sqid, __u16 cid, __u32 *result)
+{
+	struct nvme_admin_cmd cmd = {
+		.opcode		= nvme_admin_abort_cmd,
+		.cdw10		= cid << 16 | sqid,
+	};
+	int err;
+
+	err = nvme_submit_admin_passthru(fd, &cmd);
+	if (!err && result)
+		*result = cmd.result;
+	return err;
+}
nvme-ioctl.h +1 -0
index 4031c70..295a187 100644
@@ -127,5 +127,6 @@ int nvme_dir_recv(int fd, __u32 nsid, __u16 dspec, __u8 dtype, __u8 doper,
 		  __u32 data_len, __u32 dw12, void *data, __u32 *result);
 int nvme_get_properties(int fd, void **pbar);
 int nvme_set_property(int fd, int offset, int value);
+int nvme_abort(int fd, __u16 sqid, __u16 cid, __u32 *result);
 
 #endif				/* _NVME_LIB_H */
nvme.c +50 -0

56 lines not on this page · raw message

Signature · 1 line
2.7.4