Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
Subsystems (13)
PATCH v2 1/2 Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
This converts the following to Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIG
---
V2: Make DISTRO_DEFAULTS select the above options automatically
Reorganize a few config options to be closer to their source
Kconfig | 25 +++++++++++++++++++++ README | 37 ------------------------------- cmd/Kconfig | 23 +++++++++++++++++++ common/Kconfig | 9 ++++++++ configs/colibri_pxa270_defconfig | 3 +++ configs/colibri_vf_defconfig | 1 + configs/devkit8000_defconfig | 1 + configs/vf610twr_defconfig | 1 + configs/vf610twr_nand_defconfig | 1 + configs/zynq_cse_qspi_defconfig | 3 +++ include/config_distro_defaults.h | 13 ----------- include/config_fallbacks.h | 5 ----- include/configs/10m50_devboard.h | 6 ----- include/configs/3c120_devboard.h | 6 ----- include/configs/B4860QDS.h | 3 --- include/configs/BSC9131RDB.h | 3 --- include/configs/BSC9132QDS.h | 3 --- include/configs/C29XPCIE.h | 3 --- include/configs/M5208EVBE.h | 1 - include/configs/M52277EVB.h | 5 ----- include/configs/M5235EVB.h | 4 ---- include/configs/M5249EVB.h | 6 ----- include/configs/M5253DEMO.h | 2 -- include/configs/M5253EVBE.h | 5 ----- include/configs/M5272C3.h | 5 ----- include/configs/M5275EVB.h | 5 ----- include/configs/M5282EVB.h | 5 ----- include/configs/M53017EVB.h | 1 - include/configs/M5329EVB.h | 1 - include/configs/M5373EVB.h | 1 - include/configs/M54418TWR.h | 5 ----- include/configs/M54451EVB.h | 5 ----- include/configs/M54455EVB.h | 5 ----- include/configs/M5475EVB.h | 1 - include/configs/M5485EVB.h | 1 - include/configs/MCR3000.h | 2 -- include/configs/MPC8308RDB.h | 6 ----- include/configs/MPC8313ERDB.h | 7 ------ include/configs/MPC8315ERDB.h | 7 ------ include/configs/MPC8323ERDB.h | 7 ------ include/configs/MPC832XEMDS.h | 7 ------ include/configs/MPC8349EMDS.h | 7 ------ include/configs/MPC8349ITX.h | 6 ----- include/configs/MPC837XEMDS.h | 7 ------ include/configs/MPC837XERDB.h | 7 ------ include/configs/MPC8536DS.h | 3 --- include/configs/MPC8540ADS.h | 6 ----- include/configs/MPC8541CDS.h | 6 ----- include/configs/MPC8544DS.h | 6 ----- include/configs/MPC8548CDS.h | 6 ----- include/configs/MPC8555CDS.h | 6 ----- include/configs/MPC8560ADS.h | 6 ----- include/configs/MPC8568MDS.h | 6 ----- include/configs/MPC8569MDS.h | 6 ----- include/configs/MPC8572DS.h | 3 --- include/configs/MPC8610HPCD.h | 5 ----- include/configs/MPC8641HPCN.h | 5 ----- include/configs/MigoR.h | 1 - include/configs/P1010RDB.h | 3 --- include/configs/P1022DS.h | 3 --- include/configs/P1023RDB.h | 2 -- include/configs/P2041RDB.h | 3 --- include/configs/T102xQDS.h | 3 --- include/configs/T102xRDB.h | 3 --- include/configs/T1040QDS.h | 3 --- include/configs/T104xRDB.h | 3 --- include/configs/T208xQDS.h | 3 --- include/configs/T208xRDB.h | 3 --- include/configs/T4240RDB.h | 3 --- include/configs/TQM834x.h | 7 ------ include/configs/UCP1020.h | 2 -- include/configs/adp-ae3xx.h | 3 --- include/configs/adp-ag101p.h | 3 --- include/configs/advantech_dms-ba16.h | 4 ---- include/configs/am335x_shc.h | 4 ---- include/configs/am3517_crane.h | 2 -- include/configs/am3517_evm.h | 4 ---- include/configs/am43xx_evm.h | 3 --- include/configs/am57xx_evm.h | 3 --- include/configs/amcore.h | 2 -- include/configs/ap121.h | 3 --- include/configs/ap143.h | 3 --- include/configs/ap325rxa.h | 1 - include/configs/ap_sh4a_4a.h | 1 - include/configs/apalis-tk1.h | 1 - include/configs/apalis_imx6.h | 7 ------ include/configs/apf27.h | 9 -------- include/configs/armadillo-800eva.h | 1 - include/configs/aspeed-common.h | 7 ------ include/configs/astro_mcf5373l.h | 4 ---- include/configs/at91-sama5_common.h | 9 -------- include/configs/at91rm9200ek.h | 3 --- include/configs/at91sam9260ek.h | 7 ------ include/configs/at91sam9261ek.h | 7 ------ include/configs/at91sam9263ek.h | 7 ------ include/configs/at91sam9m10g45ek.h | 7 ------ include/configs/at91sam9n12ek.h | 7 ------ include/configs/at91sam9rlek.h | 4 ---- include/configs/at91sam9x5ek.h | 7 ------ include/configs/axs10x.h | 4 ---- include/configs/bcm23550_w1d.h | 3 --- include/configs/bcm28155_ap.h | 3 --- include/configs/bcm_ep_board.h | 3 --- include/configs/bcm_northstar2.h | 2 -- include/configs/boston.h | 1 - include/configs/bur_cfg_common.h | 6 ----- include/configs/calimain.h | 4 ---- include/configs/cl-som-am57x.h | 3 --- include/configs/cm_t35.h | 3 --- include/configs/cm_t3517.h | 3 --- include/configs/cm_t43.h | 1 - include/configs/cobra5272.h | 5 ----- include/configs/colibri_imx6.h | 7 ------ include/configs/colibri_imx7.h | 2 -- include/configs/colibri_pxa270.h | 7 ------ include/configs/colibri_vf.h | 4 ---- include/configs/comtrend_ar5315u.h | 3 --- include/configs/comtrend_ar5387un.h | 3 --- include/configs/comtrend_ct5361.h | 4 ---- include/configs/comtrend_vr3032u.h | 3 --- include/configs/comtrend_wap5813n.h | 4 ---- include/configs/controlcenterd.h | 5 ----- include/configs/corenet_ds.h | 3 --- include/configs/corvus.h | 7 ------ include/configs/cyrus.h | 3 --- include/configs/da850evm.h | 4 ---- include/configs/dbau1x00.h | 4 ---- include/configs/devkit3250.h | 4 ---- include/configs/devkit8000.h | 7 ------ include/configs/dh_imx6.h | 4 ---- include/configs/dra7xx_evm.h | 3 --- include/configs/dragonboard410c.h | 1 - include/configs/dragonboard820c.h | 1 - include/configs/ea20.h | 4 ---- include/configs/eb_cpu5282.h | 6 ----- include/configs/eco5pk.h | 1 - include/configs/ecovec.h | 1 - include/configs/edb93xx.h | 1 - include/configs/edison.h | 3 --- include/configs/edminiv2.h | 2 -- include/configs/espt.h | 1 - include/configs/ethernut5.h | 5 ----- include/configs/flea3.h | 6 ----- include/configs/ge_bx50v3.h | 4 ---- include/configs/hikey.h | 5 ----- include/configs/hrcon.h | 4 ---- include/configs/hsdk.h | 3 --- include/configs/huawei_hg556a.h | 4 ---- include/configs/ids8313.h | 6 ----- include/configs/imgtec_xilfpga.h | 1 - include/configs/imx27lite-common.h | 2 -- include/configs/imx31_phycore.h | 3 --- include/configs/integrator-common.h | 1 - include/configs/integratorap.h | 3 --- include/configs/ipam390.h | 4 ---- include/configs/kc1.h | 4 ---- include/configs/km/keymile-common.h | 6 ----- include/configs/kzm9g.h | 1 - include/configs/legoev3.h | 3 --- include/configs/liteboard.h | 2 -- include/configs/ls1012a_common.h | 4 ---- include/configs/ls1021aiot.h | 3 --- include/configs/ls1021aqds.h | 3 --- include/configs/ls1021atwr.h | 2 -- include/configs/ls1043a_common.h | 10 --------- include/configs/ls1043aqds.h | 2 -- include/configs/ls1046a_common.h | 4 ---- include/configs/ls1046aqds.h | 2 -- include/configs/ls1088a_common.h | 7 ------ include/configs/ls1088aqds.h | 1 - include/configs/ls1088ardb.h | 1 - include/configs/ls2080a_common.h | 5 ----- include/configs/ls2080ardb.h | 1 - include/configs/lsxl.h | 1 - include/configs/m53evk.h | 3 --- include/configs/malta.h | 5 ----- include/configs/mcx.h | 5 ----- include/configs/meesc.h | 6 ----- include/configs/meson-gxbb-common.h | 3 --- include/configs/microblaze-generic.h | 6 ----- include/configs/mpc8308_p1m.h | 6 ----- include/configs/mpr2.h | 1 - include/configs/ms7720se.h | 1 - include/configs/ms7722se.h | 1 - include/configs/ms7750se.h | 1 - include/configs/mt_ventoux.h | 1 - include/configs/mv-common.h | 3 --- include/configs/mvebu_armada-8k.h | 3 --- include/configs/mx25pdk.h | 5 ----- include/configs/mx31ads.h | 3 --- include/configs/mx31pdk.h | 3 --- include/configs/mx35pdk.h | 7 ------ include/configs/mx51evk.h | 4 ---- include/configs/mx53ard.h | 4 ---- include/configs/mx53cx9020.h | 5 ----- include/configs/mx53evk.h | 4 ---- include/configs/mx53loco.h | 5 ----- include/configs/mx53ppd.h | 7 ------ include/configs/mx53smd.h | 4 ---- include/configs/mx6_common.h | 4 ---- include/configs/mx6ul_14x14_evk.h | 2 -- include/configs/mx7_common.h | 3 --- include/configs/mx7ulp_evk.h | 5 ----- include/configs/mxs.h | 3 --- include/configs/nas220.h | 3 --- include/configs/netgear_cg3100d.h | 3 --- include/configs/nokia_rx51.h | 4 ---- include/configs/nsim.h | 3 --- include/configs/nx25-ae250.h | 2 -- include/configs/omapl138_lcdk.h | 4 ---- include/configs/origen.h | 2 -- include/configs/p1_p2_rdb_pc.h | 2 -- include/configs/p1_twr.h | 2 -- include/configs/pb1x00.h | 4 ---- include/configs/pcm052.h | 3 --- include/configs/pic32mzdask.h | 5 ----- include/configs/pico-imx6ul.h | 2 -- include/configs/picosam9g45.h | 7 ------ include/configs/pm9261.h | 6 ----- include/configs/pm9263.h | 6 ----- include/configs/pm9g45.h | 7 ------ include/configs/poplar.h | 3 --- include/configs/qemu-mips.h | 7 ------ include/configs/qemu-mips64.h | 7 ------ include/configs/qemu-ppce500.h | 3 --- include/configs/r0p7734.h | 1 - include/configs/r2dplus.h | 1 - include/configs/r7780mp.h | 1 - include/configs/rcar-gen2-common.h | 2 -- include/configs/rcar-gen3-common.h | 3 --- include/configs/rpi.h | 2 -- include/configs/rsk7203.h | 1 - include/configs/rsk7264.h | 1 - include/configs/rsk7269.h | 1 - include/configs/s32v234evb.h | 7 ------ include/configs/s5p_goni.h | 3 --- include/configs/s5pc210_universal.h | 1 - include/configs/sagem_f at st1704.h | 3 --- include/configs/sandbox.h | 4 ---- include/configs/sbc8349.h | 7 ------ include/configs/sbc8548.h | 6 ----- include/configs/sbc8641d.h | 2 -- include/configs/sfr_nb4_ser.h | 4 ---- include/configs/sh7752evb.h | 3 --- include/configs/sh7753evb.h | 3 --- include/configs/sh7757lcr.h | 1 - include/configs/sh7763rdp.h | 1 - include/configs/sh7785lcr.h | 1 - include/configs/shmin.h | 1 - include/configs/siemens-am33x-common.h | 8 ------- include/configs/smartweb.h | 7 ------ include/configs/smdkc100.h | 2 -- include/configs/snapper9260.h | 6 ----- include/configs/snapper9g45.h | 6 ----- include/configs/sniper.h | 4 ---- include/configs/socfpga_common.h | 3 --- include/configs/socrates.h | 7 ------ include/configs/spear-common.h | 2 -- include/configs/stih410-b2260.h | 7 ------ include/configs/stm32f429-discovery.h | 3 --- include/configs/stm32f429-evaluation.h | 3 --- include/configs/stm32f469-discovery.h | 3 --- include/configs/stm32f746-disco.h | 3 --- include/configs/stm32h743-disco.h | 3 --- include/configs/stm32h743-eval.h | 3 --- include/configs/stmark2.h | 2 -- include/configs/strider.h | 4 ---- include/configs/stv0991.h | 2 -- include/configs/t4qds.h | 3 --- include/configs/tam3517-common.h | 6 ----- include/configs/tao3530.h | 3 --- include/configs/taurus.h | 4 ---- include/configs/tb100.h | 4 ---- include/configs/tegra-common.h | 2 -- include/configs/thunderx_88xx.h | 6 ----- include/configs/ti814x_evm.h | 5 ----- include/configs/ti816x_evm.h | 3 --- include/configs/ti_am335x_common.h | 3 --- include/configs/ti_armv7_common.h | 6 ----- include/configs/ti_armv7_keystone2.h | 1 - include/configs/tplink_wdr4300.h | 3 --- include/configs/trats.h | 1 - include/configs/trats2.h | 1 - include/configs/tricorder.h | 3 --- include/configs/ts4800.h | 4 ---- include/configs/uniphier.h | 5 ----- include/configs/usb_a9263.h | 7 ------ include/configs/vct.h | 7 ------ include/configs/ve8313.h | 7 ------ include/configs/vexpress_aemv8a.h | 8 ------- include/configs/vexpress_common.h | 4 ---- include/configs/vf610twr.h | 2 -- include/configs/vme8349.h | 7 ------ include/configs/wb45n.h | 6 ----- include/configs/wb50n.h | 6 ----- include/configs/woodburn_common.h | 7 ------ include/configs/work_92105.h | 4 ---- include/configs/x600.h | 3 --- include/configs/x86-common.h | 7 ------ include/configs/xilinx_zynqmp.h | 13 ----------- include/configs/xilinx_zynqmp_mini.h | 7 ------ include/configs/xilinx_zynqmp_mini_emmc.h | 1 - include/configs/xpedite517x.h | 2 -- include/configs/xpedite520x.h | 5 ----- include/configs/xpedite537x.h | 3 --- include/configs/xpedite550x.h | 3 --- include/configs/xpress.h | 2 -- include/configs/xtfpga.h | 3 --- include/configs/zipitz2.h | 2 -- include/configs/zmx25.h | 6 ----- include/configs/zynq-common.h | 6 ----- include/configs/zynq_cse.h | 4 ---- net/Kconfig | 24 ++++++++++++++++++++ scripts/config_whitelist.txt | 11 --------- 314 files changed, 91 insertions(+), 1227 deletions(-)
Kconfig +25 -0
@@ -79,10 +79,35 @@ config DISTRO_DEFAULTS select CMD_PING select CMD_PART select HUSH_PARSER + select BOOTP_BOOTPATH if NET + select BOOTP_DNS if NET + select BOOTP_GATEWAY if NET + select BOOTP_HOSTNAME if NET + select BOOTP_PXE if NET + select BOOTP_SUBNETMASK if NET + select CMDLINE_EDITING + select AUTO_COMPLETE + select SYS_LONGHELP + select SUPPORT_RAW_INITRD + select ENV_VARS_UBOOT_CONFIG help Select this to enable various options and commands which are suitable for building u-boot for booting general purpose Linux distributions. +config ENV_VARS_UBOOT_CONFIG + bool "Add arch, board, vendor and soc variables to default environment" + default y + help + Define this in order to add variables describing the + U-Boot build configuration to the default environment. + These will be named arch, cpu, board, vendor, and soc. + Enabling this option will cause the following to be defined: + - CONFIG_SYS_ARCH + - CONFIG_SYS_CPU + - CONFIG_SYS_BOARD + - CONFIG_SYS_VENDOR + - CONFIG_SYS_SOC + config SYS_BOOT_GET_CMDLINE bool "Enable kernel command line setup" help
README +0 -37
@@ -1543,13 +1543,9 @@ The following options need to be configured: You can fine tune the DHCP functionality by defining CONFIG_BOOTP_* symbols: - CONFIG_BOOTP_SUBNETMASK CONFIG_BOOTP_GATEWAY - CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_NISDOMAIN - CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_BOOTFILESIZE - CONFIG_BOOTP_DNS CONFIG_BOOTP_DNS2 CONFIG_BOOTP_SEND_HOSTNAME CONFIG_BOOTP_NTPSERVER
@@ -1566,15 +1562,6 @@ The following options need to be configured: to Link-local IP address configuration if the DHCP server is not available. - CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS - serverip from a DHCP server, it is possible that more - than one DNS serverip is offered to the client. - If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS - serverip will be stored in the additional environment - variable "dnsip2". The first DNS serverip is always - stored in the variable "dnsip", when CONFIG_BOOTP_DNS - is defined. - CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable to do a dynamic update of a DNS server. To do this, they need the hostname of the DHCP requester.
@@ -2197,10 +2184,6 @@ The following options need to be configured: #define CONFIG_NFS_TIMEOUT 10000UL - Command Interpreter: - CONFIG_AUTO_COMPLETE - - Enable auto completion of commands using TAB. - CONFIG_SYS_PROMPT_HUSH_PS2 This defines the secondary prompt string, which is
@@ -2229,12 +2212,6 @@ The following options need to be configured: symbols. - Command Line Editing and History: - CONFIG_CMDLINE_EDITING - - Enable editing and History functions for interactive - command line input operations - -- Command Line PS1/PS2 support: CONFIG_CMDLINE_PS_SUPPORT Enable support for changing the command prompt string
@@ -2268,20 +2245,6 @@ The following options need to be configured: the environment like the "source" command or the boot command first. - CONFIG_ENV_VARS_UBOOT_CONFIG - - Define this in order to add variables describing the - U-Boot build configuration to the default environment. - These will be named arch, cpu, board, vendor, and soc. - - Enabling this option will cause the following to be defined: - - - CONFIG_SYS_ARCH - - CONFIG_SYS_CPU - - CONFIG_SYS_BOARD - - CONFIG_SYS_VENDOR - - CONFIG_SYS_SOC - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG Define this in order to add variables describing certain
cmd/Kconfig +23 -0
@@ -23,6 +23,29 @@ config HUSH_PARSER If disabled, you get the old, much simpler behaviour with a somewhat smaller memory footprint. +config CMDLINE_EDITING + bool "Enable command line editing" + depends on CMDLINE + default y + help + Enable editing and History functions for interactive command line + input operations + +config AUTO_COMPLETE + bool "Enable auto complete using TAB" + depends on CMDLINE + default y + help + Enable auto completion of commands using TAB. + +config SYS_LONGHELP + bool "Enable long help messages" + depends on CMDLINE + default y if CMDLINE + help + Defined when you want long help messages included + Do not set this option when short of memory. + config SYS_PROMPT string "Shell prompt" default "=> "
common/Kconfig +9 -0
@@ -519,6 +519,15 @@ config LOG_ERROR_RETURN endmenu +config SUPPORT_RAW_INITRD + bool "Enable raw initrd images" + default y + help + Note, defining the SUPPORT_RAW_INITRD allows user to supply + kernel with raw initrd images. The syntax is slightly different, the + address of the initrd must be augmented by it's size, in the following + format: "<initrd addres>:<initrd size>". + config DEFAULT_FDT_FILE string "Default fdt file" help
configs/colibri_pxa270_defconfig +3 -0
@@ -3,6 +3,9 @@ CONFIG_TARGET_COLIBRI_PXA270=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200" # CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_CMDLINE_EDITING is not set +# CONFIG_AUTO_COMPLETE is not set +# CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="$ " # CONFIG_CMD_ELF is not set # CONFIG_CMD_EXPORTENV is not set
configs/colibri_vf_defconfig +1 -0
@@ -11,6 +11,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_ARCH_MISC_INIT=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +# CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="Colibri VFxx # " CONFIG_CMD_BOOTZ=y CONFIG_CMD_ASKENV=y
configs/devkit8000_defconfig +1 -0
@@ -3,6 +3,7 @@ CONFIG_ARCH_OMAP2PLUS=y CONFIG_SYS_TEXT_BASE=0x80100000 CONFIG_TARGET_DEVKIT8000=y CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_SUPPORT_RAW_INITRD is not set CONFIG_VERSION_VARIABLE=y CONFIG_SPL=y CONFIG_SPL_OS_BOOT=y
configs/vf610twr_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_BOOTDELAY=3 CONFIG_LOGLEVEL=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +# CONFIG_AUTO_COMPLETE is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y
configs/vf610twr_nand_defconfig +1 -0
@@ -6,6 +6,7 @@ CONFIG_BOOTDELAY=3 CONFIG_LOGLEVEL=3 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_HUSH_PARSER=y +# CONFIG_AUTO_COMPLETE is not set CONFIG_CMD_BOOTZ=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_FUSE=y
configs/zynq_cse_qspi_defconfig +3 -0
@@ -11,6 +11,9 @@ CONFIG_BOOTDELAY=-1 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL=y CONFIG_SPL_STACK_R=y +# CONFIG_CMDLINE_EDITING is not set +# CONFIG_AUTO_COMPLETE is not set +# CONFIG_SYS_LONGHELP is not set CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set
include/config_distro_defaults.h +0 -13
@@ -13,17 +13,4 @@* consistent manner. */ -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_PXE -#define CONFIG_BOOTP_SUBNETMASK - -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_LONGHELP -#define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#endif /* _CONFIG_CMD_DISTRO_DEFAULTS_H */
include/config_fallbacks.h +0 -5
@@ -92,9 +92,4 @@# endif #endif -#ifndef CONFIG_CMDLINE -#undef CONFIG_CMDLINE_EDITING -#undef CONFIG_SYS_LONGHELP -#endif -#endif /* __CONFIG_FALLBACKS_H */
include/configs/10m50_devboard.h +0 -6
@@ -37,9 +37,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * FDT options
@@ -77,7 +74,6 @@/* * MISC */ -#define CONFIG_SYS_LONGHELP /* Provide extended help */ #define CONFIG_SYS_LOAD_ADDR 0xcc000000/* Half of RAM */ #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
@@ -85,7 +81,5 @@ CONFIG_ENV_SIZE - \ CONFIG_SYS_MALLOC_LEN - \ 0x10000) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #endif /* __CONFIG_H */
include/configs/3c120_devboard.h +0 -6
@@ -40,9 +40,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * FDT options
@@ -80,7 +77,6 @@/* * MISC */ -#define CONFIG_SYS_LONGHELP /* Provide extended help */ #define CONFIG_SYS_LOAD_ADDR 0xd4000000/* Half of RAM */ #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
@@ -88,7 +84,5 @@ CONFIG_ENV_SIZE - \ CONFIG_SYS_MALLOC_LEN - \ 0x10000) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #endif /* __CONFIG_H */
include/configs/B4860QDS.h +0 -3
@@ -702,9 +702,6 @@ unsigned long get_board_ddr_clk(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/BSC9131RDB.h +0 -3
@@ -287,9 +287,6 @@ extern unsigned long get_sdram_size(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #if defined(CONFIG_CMD_KGDB )
include/configs/BSC9132QDS.h +0 -3
@@ -510,9 +510,6 @@ combinations. this should be removed later/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/C29XPCIE.h +0 -3
@@ -426,9 +426,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/M5208EVBE.h +0 -1
@@ -78,7 +78,6 @@ ""#define CONFIG_PRAM 512/* 512 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M52277EVB.h +0 -5
@@ -30,9 +30,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #define CONFIG_HOSTNAME M52277EVB#define CONFIG_SYS_UBOOT_END 0x3FFFF
@@ -128,8 +125,6 @@#define CONFIG_PRAM 2048/* 2048 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)#define CONFIG_SYS_MBAR 0xFC000000
include/configs/M5235EVB.h +0 -4
@@ -29,9 +29,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #define CONFIG_MCFFEC #ifdef CONFIG_MCFFEC
@@ -93,7 +90,6 @@ ""#define CONFIG_PRAM 512/* 512 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000)
include/configs/M5249EVB.h +0 -6
@@ -31,18 +31,12 @@* BOOTP options */ #undef CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_BOOTP_BOOTPATH -#undef CONFIG_BOOTP_GATEWAY -#undef CONFIG_BOOTP_HOSTNAME/* * Command line configuration. */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_DEVICE_NULLDEV 1/* include nulldev device */ -#define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */ #define CONFIG_SYS_LOAD_ADDR 0x200000/* default load address */
include/configs/M5253DEMO.h +0 -2
@@ -90,8 +90,6 @@#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF)#define CONFIG_SYS_I2C_PINMUX_SET (0) -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000#define CONFIG_SYS_MEMTEST_START 0x400
include/configs/M5253EVBE.h +0 -5
@@ -35,9 +35,6 @@* BOOTP options */ #undef CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_BOOTP_BOOTPATH -#undef CONFIG_BOOTP_GATEWAY -#undef CONFIG_BOOTP_HOSTNAME/* * Command line configuration.
@@ -60,8 +57,6 @@#define CONFIG_SYS_ATA_ALT_OFFSET 0xC0/* Offset for alternate registers */ #define CONFIG_SYS_ATA_STRIDE 4/* Interval between registers */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000#define CONFIG_SYS_MEMTEST_START 0x400
include/configs/M5272C3.h +0 -5
@@ -46,9 +46,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -96,8 +93,6 @@"save\0" \ "" -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x20000#define CONFIG_SYS_MEMTEST_START 0x400#define CONFIG_SYS_MEMTEST_END 0x380000
include/configs/M5275EVB.h +0 -5
@@ -46,9 +46,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* Available command configuration */
@@ -87,8 +84,6 @@#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0)#define CONFIG_SYS_I2C_PINMUX_SET (0x000F) -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x800000#define CONFIG_BOOTCOMMAND "bootm ffe40000"
include/configs/M5282EVB.h +0 -5
@@ -38,9 +38,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -88,8 +85,6 @@"save\0" \ "" -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x20000#define CONFIG_SYS_MEMTEST_START 0x400
include/configs/M53017EVB.h +0 -1
@@ -95,7 +95,6 @@ ""#define CONFIG_PRAM 512/* 512 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M5329EVB.h +0 -1
@@ -87,7 +87,6 @@ ""#define CONFIG_PRAM 512/* 512 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M5373EVB.h +0 -1
@@ -87,7 +87,6 @@ ""#define CONFIG_PRAM 512/* 512 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x40010000
include/configs/M54418TWR.h +0 -5
@@ -33,9 +33,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * NAND FLASH
@@ -177,8 +174,6 @@#define CONFIG_PRAM 2048/* 2048 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)#define CONFIG_SYS_MBAR 0xFC000000
include/configs/M54451EVB.h +0 -5
@@ -33,9 +33,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* Network configuration */ #define CONFIG_MCFFEC
@@ -142,8 +139,6 @@#define CONFIG_PRAM 2048/* 2048 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
include/configs/M54455EVB.h +0 -5
@@ -33,9 +33,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* Network configuration */ #define CONFIG_MCFFEC
@@ -192,8 +189,6 @@#define CONFIG_PRAM 2048/* 2048 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)#define CONFIG_SYS_MBAR 0xFC000000
include/configs/M5475EVB.h +0 -1
@@ -124,7 +124,6 @@ ""#define CONFIG_PRAM 512/* 512 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/M5485EVB.h +0 -1
@@ -112,7 +112,6 @@ ""#define CONFIG_PRAM 512/* 512 KB */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x00010000
include/configs/MCR3000.h +0 -2
@@ -69,9 +69,7 @@#define CONFIG_WATCHDOG 1/* watchdog enabled */ /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING 1#ifdef CONFIG_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "S3K> "#endif
include/configs/MPC8308RDB.h +0 -6
@@ -407,20 +407,14 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
include/configs/MPC8313ERDB.h +0 -7
@@ -453,21 +453,14 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
include/configs/MPC8315ERDB.h +0 -7
@@ -429,23 +429,16 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#undef CONFIG_WATCHDOG/* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8323ERDB.h +0 -7
@@ -218,9 +218,6 @@#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL
@@ -311,9 +308,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -324,7 +318,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC832XEMDS.h +0 -7
@@ -299,9 +299,6 @@#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL
@@ -395,9 +392,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -408,7 +402,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8349EMDS.h +0 -7
@@ -317,9 +317,6 @@#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL
@@ -453,9 +450,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -466,7 +460,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8349ITX.h +0 -6
@@ -466,9 +466,6 @@ boards, we say we have two, but don't display a message if we find only one. */* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* Watchdog */ #undef CONFIG_WATCHDOG/* watchdog disabled */
@@ -476,9 +473,6 @@ boards, we say we have two, but don't display a message if we find only one. *//* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_LOADADDR 800000/* default location for tftp and bootm */
include/configs/MPC837XEMDS.h +0 -7
@@ -454,17 +454,11 @@ extern int board_pci_host_broken(void);* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#undef CONFIG_WATCHDOG/* watchdog disabled */ #ifdef CONFIG_MMC
@@ -476,7 +470,6 @@ extern int board_pci_host_broken(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC837XERDB.h +0 -7
@@ -468,17 +468,11 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#undef CONFIG_WATCHDOG/* watchdog disabled */ #ifdef CONFIG_MMC
@@ -490,7 +484,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8536DS.h +0 -3
@@ -595,9 +595,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8540ADS.h +0 -6
@@ -306,9 +306,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -319,9 +316,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8541CDS.h +0 -6
@@ -334,18 +334,12 @@ extern unsigned long get_clock_freq(void);* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #undef CONFIG_WATCHDOG/* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8544DS.h +0 -6
@@ -335,9 +335,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * USB
@@ -353,9 +350,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8548CDS.h +0 -6
@@ -452,18 +452,12 @@ extern unsigned long get_clock_freq(void);* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #undef CONFIG_WATCHDOG/* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8555CDS.h +0 -6
@@ -332,18 +332,12 @@ extern unsigned long get_clock_freq(void);* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #undef CONFIG_WATCHDOG/* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8560ADS.h +0 -6
@@ -345,18 +345,12 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #undef CONFIG_WATCHDOG/* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x1000000/* default load address */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
include/configs/MPC8568MDS.h +0 -6
@@ -347,18 +347,12 @@ extern unsigned long get_clock_freq(void);* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #undef CONFIG_WATCHDOG/* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8569MDS.h +0 -6
@@ -439,9 +439,6 @@ extern unsigned long get_clock_freq(void);* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #undef CONFIG_WATCHDOG/* watchdog disabled */
@@ -454,9 +451,6 @@ extern unsigned long get_clock_freq(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #if defined(CONFIG_CMD_KGDB )#define CONFIG_SYS_CBSIZE 2048/* Console I/O Buffer Size */
include/configs/MPC8572DS.h +0 -3
@@ -551,9 +551,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8610HPCD.h +0 -5
@@ -412,9 +412,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -426,8 +423,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MPC8641HPCN.h +0 -5
@@ -574,17 +574,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #undef CONFIG_WATCHDOG/* watchdog disabled */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/MigoR.h +0 -1
@@ -24,7 +24,6 @@#define MIGO_R_FLASH_BANK_SIZE (64 * 1024 * 1024)#define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */
include/configs/P1010RDB.h +0 -3
@@ -711,9 +711,6 @@ extern unsigned long get_sdram_size(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/P1022DS.h +0 -3
@@ -581,9 +581,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/P1023RDB.h +0 -2
@@ -248,8 +248,6 @@ extern unsigned long get_clock_freq(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/P2041RDB.h +0 -3
@@ -585,9 +585,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/T102xQDS.h +0 -3
@@ -759,9 +759,6 @@ unsigned long get_board_ddr_clk(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/T102xRDB.h +0 -3
@@ -773,9 +773,6 @@ unsigned long get_board_ddr_clk(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/T1040QDS.h +0 -3
@@ -637,9 +637,6 @@ unsigned long get_board_ddr_clk(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/T104xRDB.h +0 -3
@@ -760,9 +760,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/T208xQDS.h +0 -3
@@ -725,9 +725,6 @@ unsigned long get_board_ddr_clk(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/T208xRDB.h +0 -3
@@ -672,9 +672,6 @@ unsigned long get_board_ddr_clk(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/T4240RDB.h +0 -3
@@ -268,9 +268,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/TQM834x.h +0 -7
@@ -259,19 +259,12 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#undef CONFIG_WATCHDOG/* watchdog disabled */ /*
include/configs/UCP1020.h +0 -2
@@ -435,8 +435,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms tick */
include/configs/adp-ae3xx.h +0 -3
@@ -20,8 +20,6 @@#define CONFIG_SKIP_TRUNOFF_WATCHDOG -#define CONFIG_CMDLINE_EDITING -#define CONFIG_ARCH_MAP_SYSMEM #define CONFIG_BOOTP_SEND_HOSTNAME
@@ -96,7 +94,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ /* * Size of malloc() pool
include/configs/adp-ag101p.h +0 -3
@@ -18,8 +18,6 @@#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_CMDLINE_EDITING -#define CONFIG_ARCH_MAP_SYSMEM #define CONFIG_BOOTP_SEND_HOSTNAME
@@ -101,7 +99,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ /* * Size of malloc() pool
include/configs/advantech_dms-ba16.h +0 -4
@@ -202,8 +202,6 @@#define CONFIG_ARP_TIMEOUT 200UL/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x10000000#define CONFIG_SYS_MEMTEST_END 0x10010000
@@ -211,8 +209,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
include/configs/am335x_shc.h +0 -4
@@ -65,7 +65,6 @@# define CONFIG_RESET_TO_RETRY #endif -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #ifndef CONFIG_SPL_BUILD
@@ -258,11 +257,8 @@#define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII #define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10#define CONFIG_PHY_ADDR 0#define CONFIG_PHY_SMSC
include/configs/am3517_crane.h +0 -2
@@ -155,11 +155,9 @@"fi; " \"else run nandboot; fi" -#define CONFIG_AUTO_COMPLETE 1/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 32/* max number of command */ /* args */
include/configs/am3517_evm.h +0 -4
@@ -62,7 +62,6 @@#define CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_MII #define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10
@@ -171,9 +170,6 @@"else run nandboot; fi" /* Miscellaneous configurable options */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP /* We set the max number of command args high to avoid HUSH bugs. */#define CONFIG_SYS_MAXARGS 64
include/configs/am43xx_evm.h +0 -3
@@ -216,11 +216,8 @@/* CPSW Ethernet */ #define CONFIG_MII #define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10#endif
include/configs/am57xx_evm.h +0 -3
@@ -77,11 +77,8 @@#define CONFIG_HSMMC2_8BIT /* CPSW Ethernet */ -#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */
include/configs/amcore.h +0 -2
@@ -30,9 +30,7 @@"cp.b 0x20000 0xfff00000 ${filesize}\0" /* undef to save memory */ -#undef CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE 1/* add autocompletion support */ #define CONFIG_MX_CYCLIC 1/* enable mdc/mwc commands */ #define CONFIG_SYS_LOAD_ADDR 0x20000/* default load address */
include/configs/ap121.h +0 -3
@@ -37,9 +37,6 @@#define CONFIG_ENV_SIZE 0x10000/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE /* * Diagnostics
include/configs/ap143.h +0 -3
@@ -41,9 +41,6 @@#define CONFIG_ENV_SIZE 0x10000/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE /* * Diagnostics
include/configs/ap325rxa.h +0 -1
@@ -23,7 +23,6 @@#define CONFIG_SYS_TEXT_BASE 0x8FFC0000/* undef to save memory */ -#define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256
include/configs/ap_sh4a_4a.h +0 -1
@@ -26,7 +26,6 @@#define CONFIG_BITBANGMII_MULTI /* undef to save memory */ -#define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256
include/configs/apalis-tk1.h +0 -1
@@ -147,7 +147,6 @@#define CONFIG_CMD_TIME -#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_SYS_BOOT_RAMDISK_HIGH #include "tegra-common-usb-gadget.h"
include/configs/apalis_imx6.h +0 -7
@@ -41,7 +41,6 @@/* Make the HW version stuff available in U-Boot env */ #define CONFIG_VERSION_VARIABLE /* ver environment variable */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* I2C Configs */
@@ -252,8 +251,6 @@"fbmem=32M\0 " /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE #undef CONFIG_SYS_CBSIZE#define CONFIG_SYS_CBSIZE 1024#undef CONFIG_SYS_MAXARGS
@@ -266,8 +263,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
@@ -297,6 +292,4 @@#define CONFIG_CMD_TIME -#define CONFIG_SUPPORT_RAW_INITRD -#endif /* __CONFIG_H */
include/configs/apf27.h +0 -9
@@ -39,12 +39,7 @@/* * BOOTP options */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_HOSTNAME CONFIG_BOARD_NAME
@@ -90,13 +85,9 @@/* * U-Boot general configurations */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 2048/* console I/O buffer */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot argument buffer size */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_PREBOOT "run check_flash check_env;"/*
include/configs/armadillo-800eva.h +0 -1
@@ -33,7 +33,6 @@#define ARMADILLO_800EVA_SDRAM_BASE 0x40000000#define ARMADILLO_800EVA_SDRAM_SIZE (512 * 1024 * 1024) -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/aspeed-common.h +0 -7
@@ -16,8 +16,6 @@#define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -#define CONFIG_CMDLINE_EDITING -/* Enable cache controller */ #define CONFIG_SYS_DCACHE_OFF
@@ -48,15 +46,10 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_SUBNETMASK /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP #define CONFIG_BOOTCOMMAND "bootm 20080000 20300000"#define CONFIG_ENV_OVERWRITE
include/configs/astro_mcf5373l.h +0 -4
@@ -55,8 +55,6 @@#define ENABLE_JFFS 1#endif -#define CONFIG_CMDLINE_EDITING -#define CONFIG_MCFRTC #undef RTC_DEBUG
@@ -174,8 +172,6 @@/* default RAM address for user programs */ #define CONFIG_SYS_LOAD_ADDR 0x20000 -#define CONFIG_SYS_LONGHELP -#define CONFIG_FPGA_COUNT 1#define CONFIG_FPGA_SPARTAN3 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
include/configs/at91-sama5_common.h +0 -9
@@ -22,8 +22,6 @@#define CONFIG_SKIP_LOWLEVEL_INIT #endif -#define CONFIG_ENV_VARS_UBOOT_CONFIG -/* general purpose I/O */ #ifndef CONFIG_DM_GPIO #define CONFIG_AT91_GPIO
@@ -34,9 +32,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -84,10 +79,6 @@#endif -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -/* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
include/configs/at91rm9200ek.h +0 -3
@@ -171,9 +171,6 @@/* * Shell Settings */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE /* * Size of malloc() pool
include/configs/at91sam9260ek.h +0 -7
@@ -50,9 +50,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1/* * SDRAM: 1 bank, min 32, max 128 MB
@@ -159,10 +156,6 @@ "fatload mmc 0:1 0x22000000 uImage; bootm"#endif -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE -/* * Size of malloc() pool */
include/configs/at91sam9261ek.h +0 -7
@@ -51,9 +51,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1
@@ -136,10 +133,6 @@#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"#endif -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -/* * Size of malloc() pool */
include/configs/at91sam9263ek.h +0 -7
@@ -59,9 +59,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE 1 -#define CONFIG_BOOTP_BOOTPATH 1 -#define CONFIG_BOOTP_GATEWAY 1 -#define CONFIG_BOOTP_HOSTNAME 1/* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1
@@ -252,10 +249,6 @@#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"#endif -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE -/* * Size of malloc() pool */
include/configs/at91sam9m10g45ek.h +0 -7
@@ -44,9 +44,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1
@@ -98,10 +95,6 @@ "bootz 0x72000000 - 0x71000000"#endif -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -/* * Size of malloc() pool */
include/configs/at91sam9n12ek.h +0 -7
@@ -35,9 +35,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #define CONFIG_NR_DRAM_BANKS 1#define CONFIG_SYS_SDRAM_BASE 0x20000000
@@ -147,10 +144,6 @@#endif -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -/* * Size of malloc() pool */
include/configs/at91sam9rlek.h +0 -4
@@ -107,10 +107,6 @@ "bootz 0x22000000 - 0x21000000"#endif -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE -/* * Size of malloc() pool */
include/configs/at91sam9x5ek.h +0 -7
@@ -27,9 +27,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * define CONFIG_USB_EHCI_HCD to enable USB Hi-Speed (aka 2.0)
@@ -121,10 +118,6 @@#define CONFIG_ENV_SIZE 0x4000#endif -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -/* * Size of malloc() pool */
include/configs/axs10x.h +0 -4
@@ -62,9 +62,6 @@#define CONFIG_USB_OHCI_NEW #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -/* * Environment settings */
@@ -79,7 +76,6 @@/* * Console configuration */ -#define CONFIG_SYS_LONGHELP /* * Misc utility configuration
include/configs/bcm23550_w1d.h +0 -3
@@ -97,9 +97,6 @@*/ /* version string, parser, etc */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC
include/configs/bcm28155_ap.h +0 -3
@@ -96,9 +96,6 @@*/ /* version string, parser, etc */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC
include/configs/bcm_ep_board.h +0 -3
@@ -53,9 +53,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* version string, parser, etc */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC
include/configs/bcm_northstar2.h +0 -2
@@ -45,7 +45,5 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* version string, parser, etc */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #endif /* __BCM_NORTHSTAR2_H */
include/configs/boston.h +0 -1
@@ -44,7 +44,6 @@/* * Console */ -#define CONFIG_SYS_LONGHELP /* * Flash
include/configs/bur_cfg_common.h +0 -6
@@ -27,10 +27,7 @@#define CONFIG_PREBOOT "run cfgscr; run brdefaultip"/* Network defines */ -#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10/* Network console */
@@ -40,9 +37,6 @@#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ /* As stated above, the following choices are optional. */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING /* We set the max number of command args high to avoid HUSH bugs. */ #define CONFIG_SYS_MAXARGS 64
include/configs/calimain.h +0 -4
@@ -158,7 +158,6 @@*/ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10
@@ -172,9 +171,6 @@#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)#define CONFIG_LOADADDR 0xc0700000 -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC /*
include/configs/cl-som-am57x.h +0 -3
@@ -86,14 +86,11 @@#define CONFIG_MII #define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY #define CONFIG_PHY_ATHEROS #define CONFIG_SYS_RX_ETH_BUFFER 64#define PHY_ANEG_TIMEOUT 8000 -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10/* Default environment */
include/configs/cm_t35.h +0 -3
@@ -156,11 +156,8 @@/* * Miscellaneous configurable options */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)/* memtest */ /* works on */
include/configs/cm_t3517.h +0 -3
@@ -161,11 +161,8 @@/* * Miscellaneous configurable options */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_TIMESTAMP #define CONFIG_SYS_AUTOLOAD "no" -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 32/* max number of command args */
include/configs/cm_t43.h +0 -1
@@ -49,7 +49,6 @@#define CONFIG_MII #define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY #define CONFIG_PHY_ATHEROS #define CONFIG_SYS_RX_ETH_BUFFER 64
include/configs/cobra5272.h +0 -5
@@ -109,9 +109,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -167,8 +164,6 @@ from which user programs will be started *//*---*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -/* *----------------------------------------------------------------------------- * End of user parameters to be customized
include/configs/colibri_imx6.h +0 -7
@@ -39,7 +39,6 @@/* Make the HW version stuff available in U-Boot env */ #define CONFIG_VERSION_VARIABLE /* ver environment variable */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* I2C Configs */
@@ -227,8 +226,6 @@"video=mxcfb1:off fbmem=8M\0 " /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE #undef CONFIG_SYS_CBSIZE#define CONFIG_SYS_CBSIZE 1024#undef CONFIG_SYS_MAXARGS
@@ -241,8 +238,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
@@ -271,6 +266,4 @@#define CONFIG_CMD_TIME -#define CONFIG_SUPPORT_RAW_INITRD -#endif /* __CONFIG_H */
include/configs/colibri_imx7.h +0 -2
@@ -19,7 +19,6 @@#define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* Size of malloc() pool */
@@ -124,7 +123,6 @@"updlevel=2\0" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)
include/configs/colibri_pxa270.h +0 -7
@@ -27,7 +27,6 @@* Environment settings */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_SYS_MALLOC_LEN (128 * 1024)#define CONFIG_ARCH_CPU_INIT
@@ -78,15 +77,9 @@#define CONFIG_NET_RETRY_COUNT 10#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #endif -#undef CONFIG_SYS_LONGHELP/* Saves 10 KB */ #define CONFIG_SYS_DEVICE_NULLDEV 1 -#undef CONFIG_CMDLINE_EDITING/* Saves 2.5 KB */ -#undef CONFIG_AUTO_COMPLETE/* Saves 2.5 KB */ /* * Clock Configuration
include/configs/colibri_vf.h +0 -4
@@ -39,7 +39,6 @@/* Allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG /* NAND support */
@@ -132,8 +131,6 @@UBI_BOOTCMD /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#undef CONFIG_AUTO_COMPLETE#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
@@ -142,7 +139,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING /* Physical memory map */ #define CONFIG_NR_DRAM_BANKS 1
include/configs/comtrend_ar5315u.h +0 -3
@@ -11,6 +11,3 @@#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP
include/configs/comtrend_ar5387un.h +0 -3
@@ -11,6 +11,3 @@#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP
include/configs/comtrend_ct5361.h +0 -4
@@ -11,9 +11,5 @@#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_FLASH_CFI 1#define CONFIG_FLASH_CFI_DRIVER 1
include/configs/comtrend_vr3032u.h +0 -3
@@ -11,6 +11,3 @@#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP
include/configs/comtrend_wap5813n.h +0 -4
@@ -11,9 +11,5 @@#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_FLASH_CFI 1#define CONFIG_FLASH_CFI_DRIVER 1
include/configs/controlcenterd.h +0 -5
@@ -313,11 +313,6 @@/* * Command line configuration. */ -#ifndef CONFIG_TRAILBLAZER -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#endif /* CONFIG_TRAILBLAZER */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */
include/configs/corenet_ds.h +0 -3
@@ -594,9 +594,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/corvus.h +0 -7
@@ -56,9 +56,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1
@@ -106,10 +103,6 @@"nand read 0x70000000 0x200000 0x300000;" \"bootm 0x70000000" -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -/* * Size of malloc() pool */
include/configs/cyrus.h +0 -3
@@ -417,9 +417,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/da850evm.h +0 -4
@@ -203,7 +203,6 @@*/ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10
@@ -243,9 +242,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC /*
include/configs/dbau1x00.h +0 -4
@@ -58,9 +58,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
@@ -69,7 +66,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_MALLOC_LEN 128*1024
include/configs/devkit3250.h +0 -4
@@ -118,13 +118,9 @@/* * U-Boot General Configurations */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -/* * Pass open firmware flat tree */
include/configs/devkit8000.h +0 -7
@@ -78,16 +78,9 @@#define CONFIG_JFFS2_PART_SIZE 0xf980000/* size of jffs2 */ /* partition */ -#undef CONFIG_SUPPORT_RAW_INITRD -/* BOOTP/DHCP options */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_NISDOMAIN -#define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_NTPSERVER
include/configs/dh_imx6.h +0 -4
@@ -30,16 +30,12 @@#define CONFIG_SPL_TARGET "u-boot-with-spl.imx"/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -#define CONFIG_SUPPORT_RAW_INITRD /* bootz raw initrd support */ #define CONFIG_BOUNCE_BUFFER #define CONFIG_BZIP2
include/configs/dra7xx_evm.h +0 -3
@@ -96,11 +96,8 @@#define CONFIG_HSMMC2_8BIT /* CPSW Ethernet */ -#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK #define CONFIG_NET_RETRY_COUNT 10#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ #define CONFIG_MII /* Required in net/eth.c */
include/configs/dragonboard410c.h +0 -1
@@ -101,7 +101,6 @@ REFLASH(dragonboard/u-boot.img, 8)\#define CONFIG_ENV_SIZE 0x2000#define CONFIG_SYS_MMC_ENV_DEV 0/* mmc0 = emmc, mmc1 = sd */ -#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
include/configs/dragonboard820c.h +0 -1
@@ -61,7 +61,6 @@ BOOTENV#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
include/configs/ea20.h +0 -4
@@ -76,7 +76,6 @@*/ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10
@@ -103,9 +102,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC /*
include/configs/eb_cpu5282.h +0 -6
@@ -48,19 +48,13 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMDLINE_EDITING #define CONFIG_MCFTMR -#define CONFIG_SYS_LONGHELP 1 -#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/eco5pk.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK#define CONFIG_BOOTFILE "uImage" -#define CONFIG_AUTO_COMPLETE /* * Set its own mtdparts, different from common
include/configs/ecovec.h +0 -1
@@ -60,7 +60,6 @@#define CONFIG_SUPERH_ON_CHIP_R8A66597 /* undef to save memory */ -#define CONFIG_SYS_LONGHELP /* Monitor Command Prompt */ /* Buffer size for Console output */ #define CONFIG_SYS_PBSIZE 256
include/configs/edb93xx.h +0 -1
@@ -76,7 +76,6 @@/* Monitor configuration */ -#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O buffer size */ /* Serial port hardware configuration */
include/configs/edison.h +0 -3
@@ -18,14 +18,11 @@/* DISK Partition support */ /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 2048#define CONFIG_SYS_MAXARGS 128#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_AUTO_COMPLETE -/* Memory */ #define CONFIG_SYS_LOAD_ADDR 0x100000#define CONFIG_PHYSMEM
include/configs/edminiv2.h +0 -2
@@ -202,10 +202,8 @@#define CONFIG_SYS_RESET_ADDRESS 0xffff0000/* Enable command line editing */ -#define CONFIG_CMDLINE_EDITING /* provide extensive help */ -#define CONFIG_SYS_LONGHELP /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0
include/configs/espt.h +0 -1
@@ -22,7 +22,6 @@#define CONFIG_CONS_SCIF0 1#define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */
include/configs/ethernut5.h +0 -5
@@ -143,9 +143,6 @@/* DHCP/BOOTP options */ #ifdef CONFIG_CMD_DHCP #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #define CONFIG_SYS_AUTOLOAD "n"#endif
@@ -162,7 +159,5 @@"bootm 0x22000000" /* Misc. u-boot settings */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING #endif
include/configs/flea3.h +0 -6
@@ -63,9 +63,6 @@/* * Command definition */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_DNS #define CONFIG_NET_RETRY_COUNT 100
@@ -86,10 +83,7 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_MAXARGS 32/* max number of command args */
include/configs/ge_bx50v3.h +0 -4
@@ -179,8 +179,6 @@#define CONFIG_ARP_TIMEOUT 200UL/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x10000000#define CONFIG_SYS_MEMTEST_END 0x10010000
@@ -188,8 +186,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
include/configs/hikey.h +0 -5
@@ -19,8 +19,6 @@#define CONFIG_REMAKE_ELF -#define CONFIG_SUPPORT_RAW_INITRD -/* Physical Memory Map */ /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
@@ -95,12 +93,9 @@/* Preserve environment on sd card */ #define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_MAXARGS 64/* max command args */ #endif /* __HIKEY_H */
include/configs/hrcon.h +0 -4
@@ -510,13 +510,9 @@ void fpga_control_clear(unsigned int bus, int pin);* Command line configuration. */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_HZ 1000/* decrementer freq: 1ms ticks */
include/configs/hsdk.h +0 -3
@@ -70,9 +70,6 @@/* * Console configuration */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP /* * Misc utility configuration
include/configs/huawei_hg556a.h +0 -4
@@ -11,9 +11,5 @@#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_FLASH_CFI 1#define CONFIG_FLASH_CFI_DRIVER 1
include/configs/ids8313.h +0 -6
@@ -410,11 +410,6 @@/* * U-Boot environment setup */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_BOOTFILESIZE /*
@@ -448,7 +443,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
include/configs/imgtec_xilfpga.h +0 -1
@@ -40,7 +40,6 @@/*---------------------------------------------------------------------- * Commands */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ /*------------------------------------------------------------ * Console Configuration
include/configs/imx27lite-common.h +0 -2
@@ -142,8 +142,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_LOADADDR 0xa0800000/* loadaddr env var */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
include/configs/imx31_phycore.h +0 -3
@@ -84,15 +84,12 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000#define CONFIG_SYS_LOAD_ADDR 0/* default load address */ -#define CONFIG_CMDLINE_EDITING -/* * Physical Memory Map */
include/configs/integrator-common.h +0 -1
@@ -12,7 +12,6 @@#define CONFIG_SYS_MEMTEST_END 0x10000000#define CONFIG_SYS_TIMERBASE 0x13000100/* Timer1 */ #define CONFIG_SYS_LOAD_ADDR 0x7fc0/* default load address */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)/* Size of malloc() pool */ #define CONFIG_CONS_INDEX 0
include/configs/integratorap.h +0 -3
@@ -24,9 +24,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
include/configs/ipam390.h +0 -4
@@ -167,7 +167,6 @@#ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10
@@ -181,9 +180,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC /*
include/configs/kc1.h +0 -4
@@ -90,10 +90,6 @@* Console */ -#define CONFIG_AUTO_COMPLETE - -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_CBSIZE 512/*
include/configs/km/keymile-common.h +0 -6
@@ -15,7 +15,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #if defined(CONFIG_CMD_KGDB )#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #else
@@ -23,8 +22,6 @@#endif #define CONFIG_SYS_MAXARGS 32/* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE #define CONFIG_HUSH_INIT_VAR
@@ -47,9 +44,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* UBI Support for all Keymile boards */ #define CONFIG_MTD_PARTITIONS
include/configs/kzm9g.h +0 -1
@@ -39,7 +39,6 @@#define CONFIG_SYS_MAX_FLASH_SECT (512)/* prompt */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/legoev3.h +0 -3
@@ -127,9 +127,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC /*
include/configs/liteboard.h +0 -2
@@ -112,8 +112,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
include/configs/ls1012a_common.h +0 -4
@@ -13,8 +13,6 @@#include <asm/arch/config.h> #include <asm/arch/stream_id_lsch2.h> -#define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_DISPLAY_BOARDINFO_LATE #define CONFIG_SYS_TEXT_BASE 0x40100000
@@ -124,8 +122,6 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64/* max command args */ #define CONFIG_SYS_BOOTM_LEN (64 << 20)/* Increase max gunzip size */
include/configs/ls1021aiot.h +0 -3
@@ -203,7 +203,6 @@#define CONFIG_CMD_MII #define CONFIG_CMDLINE_TAG -#define CONFIG_CMDLINE_EDITING #define CONFIG_PEN_ADDR_BIG_ENDIAN #define CONFIG_LAYERSCAPE_NS_ACCESS
@@ -223,9 +222,7 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTO_COMPLETE #define CONFIG_CMD_GREPENV #define CONFIG_CMD_MEMINFO
include/configs/ls1021aqds.h +0 -3
@@ -459,7 +459,6 @@ unsigned long get_board_ddr_clk(void);#endif #define CONFIG_CMDLINE_TAG -#define CONFIG_CMDLINE_EDITING #define CONFIG_PEN_ADDR_BIG_ENDIAN #define CONFIG_LAYERSCAPE_NS_ACCESS
@@ -491,8 +490,6 @@ unsigned long get_board_ddr_clk(void);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END 0x9fffffff
include/configs/ls1021atwr.h +0 -2
@@ -480,8 +480,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END 0x9fffffff
include/configs/ls1043a_common.h +0 -10
@@ -37,8 +37,6 @@/* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_VERY_BIG_RAM
@@ -333,15 +331,7 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_LONGHELP - -#ifndef SPL_NO_MISC -#ifndef CONFIG_CMDLINE_EDITING -#define CONFIG_CMDLINE_EDITING 1 -#endif -#endif -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64/* max command args */ #define CONFIG_SYS_BOOTM_LEN (64 << 20)/* Increase max gunzip size */
include/configs/ls1043aqds.h +0 -2
@@ -372,8 +372,6 @@ unsigned long get_board_ddr_clk(void);* Miscellaneous configurable options */ #define CONFIG_MISC_INIT_R -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END 0x9fffffff
include/configs/ls1046a_common.h +0 -4
@@ -35,8 +35,6 @@/* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) -#define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_VERY_BIG_RAM
@@ -290,9 +288,7 @@/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64/* max command args */ #define CONFIG_SYS_BOOTM_LEN (64 << 20)/* Increase max gunzip size */
include/configs/ls1046aqds.h +0 -2
@@ -397,8 +397,6 @@ unsigned long get_board_ddr_clk(void);* Miscellaneous configurable options */ #define CONFIG_MISC_INIT_R -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x80000000#define CONFIG_SYS_MEMTEST_END 0x9fffffff
include/configs/ls1088a_common.h +0 -7
@@ -43,8 +43,6 @@#endif #endif -#define CONFIG_SUPPORT_RAW_INITRD -#ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_FSL_QSPI_BASE 0x20000000#define CONFIG_ENV_OFFSET 0x300000/* 3MB */
@@ -241,11 +239,6 @@ unsigned long long get_qixis_addr(void); sizeof(CONFIG_SYS_PROMPT) + 16)#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot args buffer */ -#define CONFIG_SYS_LONGHELP -#ifndef SPL_NO_ENV -#define CONFIG_CMDLINE_EDITING 1 -#endif -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64/* max command args */ #ifdef CONFIG_SPL
include/configs/ls1088aqds.h +0 -1
@@ -474,7 +474,6 @@ unsigned long get_board_ddr_clk(void);#endif -#undef CONFIG_CMDLINE_EDITING#include <config_distro_defaults.h> #define BOOT_TARGET_DEVICES (func) \ func(USB, usb, 0) \
include/configs/ls1088ardb.h +0 -1
@@ -462,7 +462,6 @@#endif #ifndef SPL_NO_ENV -#undef CONFIG_CMDLINE_EDITING#include <config_distro_defaults.h> #define BOOT_TARGET_DEVICES (func) \
include/configs/ls2080a_common.h +0 -5
@@ -36,8 +36,6 @@#define CONFIG_ENV_SECT_SIZE 0x40000#endif -#define CONFIG_SUPPORT_RAW_INITRD -#define CONFIG_SKIP_LOWLEVEL_INIT #ifndef CONFIG_SPL
@@ -216,9 +214,6 @@ unsigned long long get_qixis_addr(void);/* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64/* max command args */ #define CONFIG_SPL_BSS_START_ADDR 0x80100000
include/configs/ls2080ardb.h +0 -1
@@ -331,7 +331,6 @@ unsigned long get_board_sys_clk(void);#define CONFIG_MISC_INIT_R -#undef CONFIG_CMDLINE_EDITING#include <config_distro_defaults.h> #define BOOT_TARGET_DEVICES (func) \
include/configs/lsxl.h +0 -1
@@ -46,7 +46,6 @@#include "mv-common.h" /* loading initramfs images without uimage header */ -#define CONFIG_SUPPORT_RAW_INITRD /* ST M25P40 */ #undef CONFIG_ENV_SPI_MAX_HZ
include/configs/m53evk.h +0 -3
@@ -44,13 +44,10 @@/* * U-Boot general configurations */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024/* Console I/O buffer size */ #define CONFIG_SYS_MAXARGS 32/* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot argument buffer size */ -#define CONFIG_AUTO_COMPLETE /* Command auto complete */ -#define CONFIG_CMDLINE_EDITING /* Command history etc */ /* * Serial Driver
include/configs/malta.h +0 -5
@@ -52,9 +52,6 @@#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -/* * Serial driver */
@@ -96,6 +93,4 @@* Commands */ -#define CONFIG_SYS_LONGHELP /* verbose help, undef to save memory */ -#endif /* _MALTA_CONFIG_H */
include/configs/mcx.h +0 -5
@@ -193,13 +193,9 @@"bootcmd=mmc rescan;if fatload mmc 0 82000000 loadbootscr.scr;" \"then source 82000000;else run nandboot;fi\0" -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
@@ -303,7 +299,6 @@#define CONFIG_DRIVER_TI_EMAC #define CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_MII -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10
include/configs/meesc.h +0 -6
@@ -53,9 +53,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * SDRAM: 1 bank, min 32, max 128 MB
@@ -118,9 +115,6 @@#endif #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE /* * Size of malloc() pool
include/configs/meson-gxbb-common.h +0 -3
@@ -25,9 +25,6 @@#define GICD_BASE 0xc4301000#define GICC_BASE 0xc4302000 -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#include <config_distro_defaults.h> #define BOOT_TARGET_DEVICES (func) \
include/configs/microblaze-generic.h +0 -6
@@ -156,9 +156,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME #if defined(CONFIG_CMD_JFFS2 )# define CONFIG_MTD_PARTITIONS
@@ -180,7 +177,6 @@#define CONFIG_SYS_CBSIZE 512/* max number of command args */ #define CONFIG_SYS_MAXARGS 15 -#define CONFIG_SYS_LONGHELP /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0
@@ -204,8 +200,6 @@ "setenv stdin serial\0"#endif -#define CONFIG_CMDLINE_EDITING -/* Enable flat device tree support */ #define CONFIG_LMB 1
include/configs/mpc8308_p1m.h +0 -6
@@ -374,20 +374,14 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration. */ -#define CONFIG_CMDLINE_EDITING 1/* add command line history */ -/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */
include/configs/mpr2.h +0 -1
@@ -22,7 +22,6 @@#define CONFIG_DISPLAY_BOARDINFO /* U-Boot internals */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
include/configs/ms7720se.h +0 -1
@@ -23,7 +23,6 @@#define MS7720SE_FLASH_BANK_SIZE (8 * 1024 * 1024)#define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ /* List of legal baudrate settings for this board */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
include/configs/ms7722se.h +0 -1
@@ -24,7 +24,6 @@#define MS7722SE_FLASH_BANK_SIZE (8*1024 * 1024)#define CONFIG_SYS_TEXT_BASE 0x8FFC0000 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_PBSIZE 256/* Buffer size for Console output */ #define CONFIG_SYS_BAUDRATE_TABLE { 115200 }/* List of legal baudrate settings for this board */
include/configs/ms7750se.h +0 -1
@@ -27,7 +27,6 @@#define CONFIG_SYS_SDRAM_BASE (0x8C000000)#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_PBSIZE 256#define CONFIG_SYS_TEXT_BASE 0x8FFC0000
include/configs/mt_ventoux.h +0 -1
@@ -22,7 +22,6 @@#define CONFIG_MACH_TYPE MACH_TYPE_AM3517_MT_VENTOUX#define CONFIG_BOOTFILE "uImage" -#define CONFIG_AUTO_COMPLETE #define CONFIG_HOSTNAME mt_ventoux
include/configs/mv-common.h +0 -3
@@ -77,9 +77,6 @@/* * Other required minimal configurations */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ #define CONFIG_SYS_LOAD_ADDR 0x00800000/* default load adr- 8M */ #define CONFIG_SYS_MEMTEST_START 0x00800000/* 8M */
include/configs/mvebu_armada-8k.h +0 -3
@@ -46,9 +46,6 @@/* * Other required minimal configurations */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ #define CONFIG_SYS_LOAD_ADDR 0x00800000/* default load adr- 8M */ #define CONFIG_SYS_MEMTEST_START 0x00800000/* 8M */
include/configs/mx25pdk.h +0 -5
@@ -58,12 +58,9 @@#define CONFIG_SYS_MMC_ENV_DEV 0/* U-Boot general configuration */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP /* Ethernet */ #define CONFIG_FEC_MXC
@@ -191,7 +188,5 @@"else run netboot; fi" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE #endif /* __CONFIG_H */
include/configs/mx31ads.h +0 -3
@@ -94,15 +94,12 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING 1 -/*----------------------------------------------------------------------- * Physical Memory Map */
include/configs/mx31pdk.h +0 -3
@@ -82,7 +82,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ /* memtest works on */ #define CONFIG_SYS_MEMTEST_START 0x80000000
@@ -91,8 +90,6 @@/* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x81000000 -#define CONFIG_CMDLINE_EDITING -/*----------------------------------------------------------------------- * Physical Memory Map */
include/configs/mx35pdk.h +0 -7
@@ -73,9 +73,6 @@/* * Command definition */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_DNS #define CONFIG_NET_RETRY_COUNT 100
@@ -102,10 +99,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0/* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000
include/configs/mx51evk.h +0 -4
@@ -169,16 +169,12 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x90000000#define CONFIG_SYS_MEMTEST_END 0x90010000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/*----------------------------------------------------------------------- * Physical Memory Map */
include/configs/mx53ard.h +0 -4
@@ -153,16 +153,12 @@#define CONFIG_ARP_TIMEOUT 200UL/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x70000000#define CONFIG_SYS_MEMTEST_END 0x70010000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2#define PHYS_SDRAM_1 CSD0_BASE_ADDR
include/configs/mx53cx9020.h +0 -5
@@ -55,7 +55,6 @@#define CONFIG_CONS_INDEX 1/* Command definition */ -#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_LOADADDR 0x70010000/* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000
@@ -138,8 +137,6 @@#define CONFIG_ARP_TIMEOUT 200UL/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x70000000
@@ -147,8 +144,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2#define PHYS_SDRAM_1 CSD0_BASE_ADDR
include/configs/mx53evk.h +0 -4
@@ -106,16 +106,12 @@#define CONFIG_ARP_TIMEOUT 200UL/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x70000000#define CONFIG_SYS_MEMTEST_END 0x70010000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM_1 CSD0_BASE_ADDR
include/configs/mx53loco.h +0 -5
@@ -68,7 +68,6 @@#define CONFIG_CONS_INDEX 1/* Command definition */ -#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_ETHPRIME "FEC0"
@@ -148,8 +147,6 @@#define CONFIG_ARP_TIMEOUT 200UL/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512/* Console I/O Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0x70000000
@@ -157,8 +154,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2#define PHYS_SDRAM_1 CSD0_BASE_ADDR
include/configs/mx53ppd.h +0 -7
@@ -40,8 +40,6 @@#define CONFIG_SYS_FSL_ESDHC_ADDR 0#define CONFIG_SYS_FSL_ESDHC_NUM 2 -#define CONFIG_SUPPORT_RAW_INITRD /* bootz raw initrd support */ -/* Eth Configs */ #define CONFIG_MII
@@ -84,7 +82,6 @@#define CONFIG_BAUDRATE 115200/* Command definition */ -#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_ETHPRIME "FEC0"
@@ -176,8 +173,6 @@#define CONFIG_ARP_TIMEOUT 200UL/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 48/* max number of command args */
@@ -188,8 +183,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2#define PHYS_SDRAM_1 CSD0_BASE_ADDR
include/configs/mx53smd.h +0 -4
@@ -98,16 +98,12 @@#define CONFIG_ARP_TIMEOUT 200UL/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MEMTEST_START 0x70000000#define CONFIG_SYS_MEMTEST_END 0x70010000#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2#define PHYS_SDRAM_1 CSD0_BASE_ADDR
include/configs/mx6_common.h +0 -4
@@ -60,12 +60,8 @@#define CONFIG_CONS_INDEX 1/* Filesystems and image support */ -#define CONFIG_SUPPORT_RAW_INITRD /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512#define CONFIG_SYS_MAXARGS 32
include/configs/mx6ul_14x14_evk.h +0 -2
@@ -149,8 +149,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR#define CONFIG_SYS_HZ 1000 -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
include/configs/mx7_common.h +0 -3
@@ -36,9 +36,6 @@#define CONFIG_CONS_INDEX 1/* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_CBSIZE 512#define CONFIG_SYS_MAXARGS 32
include/configs/mx7ulp_evk.h +0 -5
@@ -68,9 +68,6 @@#define CONFIG_CONS_INDEX 1#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CACHELINE_SIZE 64/* Miscellaneous configurable options */
@@ -79,8 +76,6 @@#define CONFIG_SYS_MAXARGS 256 -#define CONFIG_CMDLINE_EDITING -/* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1
include/configs/mxs.h +0 -3
@@ -82,13 +82,10 @@#define CONFIG_SPL_TEXT_BASE 0x00001000/* U-Boot general configuration */ -#define CONFIG_SYS_LONGHELP #define CONFIG_SYS_CBSIZE 1024/* Console I/O buffer size */ #define CONFIG_SYS_MAXARGS 32/* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot argument buffer size */ -#define CONFIG_AUTO_COMPLETE /* Command auto complete */ -#define CONFIG_CMDLINE_EDITING /* Command history etc */ /* Booting Linux */ #define CONFIG_CMDLINE_TAG
include/configs/nas220.h +0 -3
@@ -41,9 +41,6 @@/* * Commands configuration */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING /* * mv-common.h should be defined after CMD configs since it used them
include/configs/netgear_cg3100d.h +0 -3
@@ -9,6 +9,3 @@#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP
include/configs/nokia_rx51.h +0 -4
@@ -91,9 +91,6 @@/* commands to include */ -#define CONFIG_CMDLINE_EDITING /* add command line history */ -#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ -#define CONFIG_SYS_I2C /*
@@ -312,7 +309,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
include/configs/nsim.h +0 -3
@@ -34,8 +34,6 @@/* * Command line configuration */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING /* * Environment settings
@@ -52,6 +50,5 @@/* * Console configuration */ -#define CONFIG_SYS_LONGHELP #endif /* _CONFIG_NSIM_H_ */
include/configs/nx25-ae250.h +0 -2
@@ -13,7 +13,6 @@*/ #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_CMDLINE_EDITING #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_SERVERIP
@@ -30,7 +29,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ /*
include/configs/omapl138_lcdk.h +0 -4
@@ -206,7 +206,6 @@#define CONFIG_MII #undef CONFIG_DRIVER_TI_EMAC_USE_RMII#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_NET_RETRY_COUNT 10
@@ -220,9 +219,6 @@#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Args Buffer Size */ #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP #define CONFIG_MX_CYCLIC /*
include/configs/origen.h +0 -2
@@ -47,8 +47,6 @@#define S5P_CHECK_DIDLE 0xBAD00000#define S5P_CHECK_LPA 0xABAD0000 -#define CONFIG_SUPPORT_RAW_INITRD -/* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030#define CONFIG_SPL_TEXT_BASE 0x02021410
include/configs/p1_p2_rdb_pc.h +0 -2
@@ -797,8 +797,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/p1_twr.h +0 -2
@@ -387,8 +387,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ #define CONFIG_SYS_LOAD_ADDR 0x2000000/* default load address */ /*
include/configs/pb1x00.h +0 -4
@@ -44,7 +44,6 @@/* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_MALLOC_LEN 128*1024
@@ -133,9 +132,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /* * Command line configuration.
include/configs/pcm052.h +0 -3
@@ -187,9 +187,6 @@"nand write ${ram_addr} root ${filesize}; fi\0" /* Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_AUTO_COMPLETE -#define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_MEMTEST_START 0x80010000#define CONFIG_SYS_MEMTEST_END 0x87C00000
include/configs/pic32mzdask.h +0 -5
@@ -52,13 +52,11 @@/*---------------------------------------------------------------------- * Commands */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ /*------------------------------------------------------------ * Console Configuration */ #define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ -#define CONFIG_CMDLINE_EDITING 1/*----------------------------------------------------------------------- * Networking Configuration
@@ -73,9 +71,6 @@* BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME /*-------------------------------------------------- * USB Configuration
include/configs/pico-imx6ul.h +0 -2
@@ -121,8 +121,6 @@#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
Lines of this file are not shown. View the raw message.
include/configs/[email protected] renamed from include/configs/sagem_f at st1704.h +0 -3
Lines of this file are not shown. View the raw message.
include/configs/xilinx_zynqmp_mini_emmc.h +0 -1
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.7.4
Part of the diff is not shown here. View the raw message.
PATCH v2 1/2 Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
Quoted 13 lines · Adam Ford
This converts the following to
Kconfig:
CONFIG_BOOTP_BOOTPATH
CONFIG_BOOTP_DNS
CONFIG_BOOTP_GATEWAY
CONFIG_BOOTP_HOSTNAME
CONFIG_BOOTP_PXE
CONFIG_BOOTP_SUBNETMASK
CONFIG_CMDLINE_EDITING
CONFIG_AUTO_COMPLETE
CONFIG_SYS_LONGHELP
CONFIG_SUPPORT_RAW_INITRD
CONFIG_ENV_VARS_UBOOT_CONFIG
Quoted 1 line
Signed-off-by Adam Ford <[email protected]>
I made a few tweaks to this. None of CONFIG_BOOTP_* nor CONFIG_SUPPORT_RAW_INITRD nor CONFIG_ENV_VARS_UBOOT_CONFIG are default y. And I re-ran the migration and synced defconfigs. After that, applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180224/574b77a6/attachment.sig>