arm: sunxi: Use proper and meaningful Kconfig entries
Subsystems (3)
cover arm: sunxi: Use proper and meaningful Kconfig entries
Current arch/arm/mach-sunxi/Makefile has improper build options which relies mostly on MACH_ options. This series get rid of those and added proper Kconfig options.
All Kconfig entry name are re-used from Linux so-that future dm conversion on these can be meaningful.
Jagan Teki (11):
sunxi: Add MFD_SUN6I_PRCM kconfig entry
sunxi: Add I2C_SUN6I_P2WI kconfig entry
sunxi: Use MFD_SUN6I_PRCM if used
sunxi: Add SUNXI_RSB kconfig entry
sunxi: Add PMIC_SUNXI kconfig entry
sunxi: add DRAM_SUN6I kconfig
sunxi: Add DRAM_SUN4I kconfig entry
sunxi: Add DRAM_SUN9I kconfig entry
sunxi: Add DRAM_SUN8I_A23 kconfig entry
sunxi: Add DRAM_SUN8I_A33 kconfig entry
sunxi: Add DRAM_SUN8I_A83T kconfig entry
arch/arm/mach-sunxi/Kconfig | 81 ++++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-sunxi/Makefile | 30 ++++++---------- drivers/power/Kconfig | 5 +++ 3 files changed, 96 insertions(+), 20 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/11 sunxi: Add MFD_SUN6I_PRCM kconfig entry
Add simple and meaningful kconfig option for prcm.c instead of using MACH type on Makefile.
PRCM (Power/Reset/Clock Management) is considered as a Multi-Functional Device, so used the same on Kconfig definition.
--- arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-sunxi/Kconfig +7 -0
@@ -6,6 +6,12 @@ config SPL_LDSCRIPT config IDENT_STRING default " Allwinner Technology" +config MFD_SUN6I_PRCM + bool "Allwinner A31 PRCM controller" + help + Support for the PRCM (Power/Reset/Clock Management) unit available + in A31 SoC. + config SUNXI_HIGH_SRAM bool default n
@@ -87,6 +93,7 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select MFD_SUN6I_PRCM select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
arch/arm/mach-sunxi/Makefile +1 -1
@@ -16,7 +16,7 @@ obj-y += pinmux.o ifndef CONFIG_MACH_SUN9I obj-y += usb_phy.o endif -obj-$(CONFIG_MACH_SUN6I) += prcm.o +obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o obj-$(CONFIG_MACH_SUN8I) += prcm.o obj-$(CONFIG_MACH_SUN9I) += prcm.o obj-$(CONFIG_MACH_SUN6I) += p2wi.o
Signature · 1 line
2.7.4
PATCH 2/11 sunxi: Add I2C_SUN6I_P2WI kconfig entry
In reply to Jagan TekiAdd simple and meaningful kconfig option for p2wi.c instead of using MACH type on Makefile.
p2wi is an I2C controller, so used the same on kconfig definition.
--- arch/arm/mach-sunxi/Kconfig | 12 ++++++++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 13 insertions(+), 1 deletion(-)
arch/arm/mach-sunxi/Kconfig +12 -0
@@ -6,6 +6,17 @@ config SPL_LDSCRIPT config IDENT_STRING default " Allwinner Technology" +config I2C_SUN6I_P2WI + bool "Allwinner sun6i internal P2WI controller" + help + If you say yes to this option, support will be included for the + P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi + SOCs. + The P2WI looks like an SMBus controller (which supports only byte + accesses), except that it only supports one slave device. + This interface is used to connect to specific PMIC devices (like the + AXP221). + config MFD_SUN6I_PRCM bool "Allwinner A31 PRCM controller" help
@@ -93,6 +104,7 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select I2C_SUN6I_P2WI select MFD_SUN6I_PRCM select SUNXI_GEN_SUN6I select SUPPORT_SPL
arch/arm/mach-sunxi/Makefile +1 -1
@@ -16,10 +16,10 @@ obj-y += pinmux.o ifndef CONFIG_MACH_SUN9I obj-y += usb_phy.o endif +obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o obj-$(CONFIG_MACH_SUN8I) += prcm.o obj-$(CONFIG_MACH_SUN9I) += prcm.o -obj-$(CONFIG_MACH_SUN6I) += p2wi.o obj-$(CONFIG_MACH_SUN8I) += rsb.o obj-$(CONFIG_MACH_SUN9I) += rsb.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
Signature · 1 line
2.7.4
PATCH 3/11 sunxi: Use MFD_SUN6I_PRCM if used
In reply to Jagan TekiMFD_SUN6I_PRCM is also used for SUN8I and SUN9I, so select the same on respective MACH types.
--- arch/arm/mach-sunxi/Kconfig | 2 ++ arch/arm/mach-sunxi/Makefile | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/mach-sunxi/Kconfig +2 -0
@@ -182,6 +182,7 @@ config MACH_SUN8I_V3S config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 + select MFD_SUN6I_PRCM select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I select SUPPORT_SPL
@@ -212,6 +213,7 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool + select MFD_SUN6I_PRCM default y if MACH_SUN8I_A23 default y if MACH_SUN8I_A33 default y if MACH_SUN8I_A83T
arch/arm/mach-sunxi/Makefile +0 -2
@@ -18,8 +18,6 @@ obj-y += usb_phy.o endif obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o -obj-$(CONFIG_MACH_SUN8I) += prcm.o -obj-$(CONFIG_MACH_SUN9I) += prcm.o obj-$(CONFIG_MACH_SUN8I) += rsb.o obj-$(CONFIG_MACH_SUN9I) += rsb.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
Signature · 1 line
2.7.4
PATCH 4/11 sunxi: Add SUNXI_RSB kconfig entry
In reply to Jagan TekiAdd simple and meaningful kconfig option for rsb.c instead of using MACH type on Makefile.
--- arch/arm/mach-sunxi/Kconfig | 10 ++++++++++ arch/arm/mach-sunxi/Makefile | 3 +-- 2 files changed, 11 insertions(+), 2 deletions(-)
arch/arm/mach-sunxi/Kconfig +10 -0
@@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM Support for the PRCM (Power/Reset/Clock Management) unit available in A31 SoC. +config SUNXI_RSB + bool "Allwinner sunXi Reduced Serial Bus Driver" + help + Say y here to enable support for Allwinner's Reduced Serial Bus + (RSB) support. This controller is responsible for communicating + with various RSB based devices, such as AXP223, AXP8XX PMICs, + and AC100/AC200 ICs. + config SUNXI_HIGH_SRAM bool default n
@@ -185,6 +193,7 @@ config MACH_SUN9I select MFD_SUN6I_PRCM select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I + select SUNXI_RSB select SUPPORT_SPL config MACH_SUN50I
@@ -213,6 +222,7 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool + select SUNXI_RSB select MFD_SUN6I_PRCM default y if MACH_SUN8I_A23 default y if MACH_SUN8I_A33
arch/arm/mach-sunxi/Makefile +1 -2
@@ -18,8 +18,7 @@ obj-y += usb_phy.o endif obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o -obj-$(CONFIG_MACH_SUN8I) += rsb.o -obj-$(CONFIG_MACH_SUN9I) += rsb.o +obj-$(CONFIG_SUNXI_RSB) += rsb.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
Signature · 1 line
2.7.4
PATCH 4/11 sunxi: Add SUNXI_RSB kconfig entry
Hi,
Quoted 14 lines · Jagan Teki
Add simple and meaningful kconfig option for
rsb.cinstead of using MACH type onMakefile.Signed-off-by Jagan Teki <[email protected]>--- arch/arm/mach-sunxi/Kconfig | 10 ++++++++++ arch/arm/mach-sunxi/Makefile | 3 +-- 2 files changed, 11 insertions(+), 2 deletions(-)arch/arm/mach-sunxi/Kconfig +0
-0
arch/arm/mach-sunxi/Kconfig config MFD_SUN6I_PRCM · line 26
Quoted 4 lines
arch/arm/mach-sunxi/Kconfig +1
-0@@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM Support for the PRCM (Power/Reset/Clock Management) unit available in A31 SoC. +config SUNXI_RSB
Following the rest of the convention we have, that would be SUN8I_RSB.
Maxime
Signature · 10 lines
Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180206/9001952a/attachment.sig>
PATCH 4/11 sunxi: Add SUNXI_RSB kconfig entry
Quoted 20 lines · Maxime Ripard
Hi,
Quoted 17 lines · Jagan Teki
Add simple and meaningful kconfig option for
rsb.cinstead of using MACH type onMakefile.Signed-off-by Jagan Teki <[email protected]>--- arch/arm/mach-sunxi/Kconfig | 10 ++++++++++ arch/arm/mach-sunxi/Makefile | 3 +-- 2 files changed, 11 insertions(+), 2 deletions(-)arch/arm/mach-sunxi/Kconfig +0
-0@@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM Support for the PRCM (Power/Reset/Clock Management) unit available in A31 SoC.
Quoted 3 lines
arch/arm/mach-sunxi/Kconfig config MFD_SUN6I_PRCM · line 26
Quoted 1 line
arch/arm/mach-sunxi/Kconfig +1
-0+config SUNXI_RSBFollowing the rest of the convention we have, that would be
SUN8I_RSB.
Followed Linux notation to sync with, where the driver will also have support AC100.
PATCH 4/11 sunxi: Add SUNXI_RSB kconfig entry
Quoted 21 lines · Jagan Teki
Quoted 20 lines · Maxime Ripard
Hi,
Quoted 17 lines · Jagan Teki
Add simple and meaningful kconfig option for
rsb.cinstead of using MACH type onMakefile.Signed-off-by Jagan Teki <[email protected]>--- arch/arm/mach-sunxi/Kconfig | 10 ++++++++++ arch/arm/mach-sunxi/Makefile | 3 +-- 2 files changed, 11 insertions(+), 2 deletions(-)arch/arm/mach-sunxi/Kconfig +0
-0@@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM Support for the PRCM (Power/Reset/Clock Management) unit available in A31 SoC.
Quoted 6 lines
Quoted 3 lines
arch/arm/mach-sunxi/Kconfig config MFD_SUN6I_PRCM · line 26
Quoted 1 line
arch/arm/mach-sunxi/Kconfig +1
-0+config SUNXI_RSBFollowing the rest of the convention we have, that would be
SUN8I_RSB.Followed Linux notation to sync with, where the driver will also have support AC100.
AC100 is a device connected on that bus, not the bus itself.
Maxime
Signature · 10 lines
Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180213/cf0c7ad9/attachment.sig>
PATCH 5/11 sunxi: Add PMIC_SUNXI kconfig entry
In reply to Jagan TekiAdd simple and meaningful kconfig option for pmic_bus.c instead of using MACH type on Makefile.
--- arch/arm/mach-sunxi/Kconfig | 6 ++++++ arch/arm/mach-sunxi/Makefile | 7 +------ drivers/power/Kconfig | 5 +++++ 3 files changed, 12 insertions(+), 6 deletions(-)
arch/arm/mach-sunxi/Kconfig +6 -0
@@ -23,6 +23,12 @@ config MFD_SUN6I_PRCM Support for the PRCM (Power/Reset/Clock Management) unit available in A31 SoC. +config PMIC_SUNXI + bool "Sunxi PMIC bus access helpers" + help + Select this PMIC bus access helpers for Sunxi platform PRCM or other + AXP family PMIC devices. + config SUNXI_RSB bool "Allwinner sunXi Reduced Serial Bus Driver" help
arch/arm/mach-sunxi/Makefile +1 -6
@@ -18,6 +18,7 @@ obj-y += usb_phy.o endif obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o +obj-$(CONFIG_PMIC_SUNXI) += pmic_bus.o obj-$(CONFIG_SUNXI_RSB) += rsb.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
@@ -31,12 +32,6 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o -obj-$(CONFIG_AXP152_POWER) += pmic_bus.o -obj-$(CONFIG_AXP209_POWER) += pmic_bus.o -obj-$(CONFIG_AXP221_POWER) += pmic_bus.o -obj-$(CONFIG_AXP809_POWER) += pmic_bus.o -obj-$(CONFIG_AXP818_POWER) += pmic_bus.o - ifdef CONFIG_SPL_BUILD obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
drivers/power/Kconfig +5 -0
@@ -22,6 +22,7 @@ config SUNXI_NO_PMIC config AXP152_POWER bool "axp152 pmic support" depends on MACH_SUN5I + select PMIC_SUNXI select CMD_POWEROFF ---help--- Select this to enable support for the axp152 pmic found on most
@@ -30,6 +31,7 @@ config AXP152_POWER config AXP209_POWER bool "axp209 pmic support" depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I + select PMIC_SUNXI select CMD_POWEROFF ---help--- Select this to enable support for the axp209 pmic found on most
@@ -38,6 +40,7 @@ config AXP209_POWER config AXP221_POWER bool "axp221 / axp223 pmic support" depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 + select PMIC_SUNXI select CMD_POWEROFF ---help--- Select this to enable support for the axp221/axp223 pmic found on most
@@ -46,6 +49,7 @@ config AXP221_POWER config AXP809_POWER bool "axp809 pmic support" depends on MACH_SUN9I + select PMIC_SUNXI select CMD_POWEROFF ---help--- Say y here to enable support for the axp809 pmic found on A80 boards.
@@ -53,6 +57,7 @@ config AXP809_POWER config AXP818_POWER bool "axp818 pmic support" depends on MACH_SUN8I_A83T + select PMIC_SUNXI select CMD_POWEROFF ---help--- Say y here to enable support for the axp818 pmic found on
Signature · 1 line
2.7.4
PATCH 5/11 sunxi: Add PMIC_SUNXI kconfig entry
Quoted 15 lines · Jagan Teki
Add simple and meaningful kconfig option for
pmic_bus.cinstead of using MACH type onMakefile.Signed-off-by Jagan Teki <[email protected]>--- arch/arm/mach-sunxi/Kconfig | 6 ++++++ arch/arm/mach-sunxi/Makefile | 7 +------ drivers/power/Kconfig | 5 +++++ 3 files changed, 12 insertions(+), 6 deletions(-)arch/arm/mach-sunxi/Kconfig +0
-0
arch/arm/mach-sunxi/Kconfig config MFD_SUN6I_PRCM · line 31
Quoted 9 lines
arch/arm/mach-sunxi/Kconfig +6
-0@@ -23,6 +23,12 @@ config MFD_SUN6I_PRCM Support for the PRCM (Power/Reset/Clock Management) unit available in A31 SoC. +config PMIC_SUNXI + bool "Sunxi PMIC bus access helpers" + help + Select this PMIC bus access helpers for Sunxi platform PRCM or other + AXP family PMIC devices. +
This is only meant for AXP* PMIC, which Allwinner boards might or might not have. AXP_PMIC or some variation of it would be a better choice.
Maxime
Signature · 10 lines
Maxime Ripard, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 833 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180206/88881272/attachment.sig>
PATCH 6/11 sunxi: add DRAM_SUN6I kconfig
In reply to Jagan TekiAdd proper and simple kconfig option for dram_sun6i.c instead of using MACH type on Makefile.
--- arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-sunxi/Kconfig +7 -0
@@ -6,6 +6,12 @@ config SPL_LDSCRIPT config IDENT_STRING default " Allwinner Technology" +config DRAM_SUN6I + bool "Sun6i platform dram controller driver" + help + Select this dram controller driver for Sun6i platforms, + like A31/A31s. + config I2C_SUN6I_P2WI bool "Allwinner sun6i internal P2WI controller" help
@@ -118,6 +124,7 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select DRAM_SUN6I select I2C_SUN6I_P2WI select MFD_SUN6I_PRCM select SUNXI_GEN_SUN6I
arch/arm/mach-sunxi/Makefile +1 -1
@@ -33,9 +33,9 @@ endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o -obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
Signature · 1 line
2.7.4
PATCH 7/11 sunxi: Add DRAM_SUN4I kconfig entry
In reply to Jagan TekiAdd proper and simple kconfig option for dram_sun4i.c instead of using MACH type on Makefile.
--- arch/arm/mach-sunxi/Kconfig | 9 +++++++++ arch/arm/mach-sunxi/Makefile | 4 +--- 2 files changed, 10 insertions(+), 3 deletions(-)
arch/arm/mach-sunxi/Kconfig +9 -0
@@ -6,6 +6,12 @@ config SPL_LDSCRIPT config IDENT_STRING default " Allwinner Technology" +config DRAM_SUN4I + bool "Sun4/5/7i platform dram controller driver" + help + Select this dram controller driver for Sun4/5/7i platforms, + like A10/A13/A20. + config DRAM_SUN6I bool "Sun6i platform dram controller driver" help
@@ -108,6 +114,7 @@ config MACH_SUN4I bool "sun4i (Allwinner A10)" select CPU_V7 select ARM_CORTEX_CPU_IS_UP + select DRAM_SUN4I select SUNXI_GEN_SUN4I select SUPPORT_SPL
@@ -115,6 +122,7 @@ config MACH_SUN5I bool "sun5i (Allwinner A13)" select CPU_V7 select ARM_CORTEX_CPU_IS_UP + select DRAM_SUN4I select SUNXI_GEN_SUN4I select SUPPORT_SPL
@@ -137,6 +145,7 @@ config MACH_SUN7I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select DRAM_SUN4I select SUNXI_GEN_SUN4I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
arch/arm/mach-sunxi/Makefile +1 -3
@@ -33,10 +33,8 @@ endif obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o ifdef CONFIG_SPL_BUILD +obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o -obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o -obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o -obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
Signature · 1 line
2.7.4
PATCH 8/11 sunxi: Add DRAM_SUN9I kconfig entry
In reply to Jagan TekiAdd proper and simple kconfig option for dram_sun9i.c instead of using MACH type on Makefile.
--- arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-sunxi/Kconfig +7 -0
@@ -18,6 +18,12 @@ config DRAM_SUN6I Select this dram controller driver for Sun6i platforms, like A31/A31s. +config DRAM_SUN9I + bool "Sun9i platform dram controller driver" + help + Select this dram controller driver for Sun9i platforms, + like A80. + config I2C_SUN6I_P2WI bool "Allwinner sun6i internal P2WI controller" help
@@ -212,6 +218,7 @@ config MACH_SUN8I_V3S config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 + select DRAM_SUN9I select MFD_SUN6I_PRCM select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I
arch/arm/mach-sunxi/Makefile +1 -1
@@ -35,10 +35,10 @@ obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o +obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/ -obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o endif
Signature · 1 line
2.7.4
PATCH 9/11 sunxi: Add DRAM_SUN8I_A23 kconfig entry
In reply to Jagan TekiAdd proper and simple kconfig option for dram_sun8i_a23.c instead of using MACH type on Makefile.
--- arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-sunxi/Kconfig +7 -0
@@ -18,6 +18,12 @@ config DRAM_SUN6I Select this dram controller driver for Sun6i platforms, like A31/A31s. +config DRAM_SUN8I_A23 + bool "Sun8i A23 platform dram controller driver" + help + Select this dram controller driver for Sun8i platforms, + for A23 SOC. + config DRAM_SUN9I bool "Sun9i platform dram controller driver" help
@@ -162,6 +168,7 @@ config MACH_SUN8I_A23 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select DRAM_SUN8I_A23 select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
arch/arm/mach-sunxi/Makefile +1 -1
@@ -35,8 +35,8 @@ obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o +obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o -obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o
Signature · 1 line
2.7.4
PATCH 10/11 sunxi: Add DRAM_SUN8I_A33 kconfig entry
In reply to Jagan TekiAdd proper and simple kconfig option for dram_sun8i_a33.c instead of using MACH type on Makefile.
--- arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-sunxi/Kconfig +7 -0
@@ -24,6 +24,12 @@ config DRAM_SUN8I_A23 Select this dram controller driver for Sun8i platforms, for A23 SOC. +config DRAM_SUN8I_A33 + bool "Sun8i A33 platform dram controller driver" + help + Select this dram controller driver for Sun8i platforms, + for A33 SOC. + config DRAM_SUN9I bool "Sun9i platform dram controller driver" help
@@ -179,6 +185,7 @@ config MACH_SUN8I_A33 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select DRAM_SUN8I_A33 select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
arch/arm/mach-sunxi/Makefile +1 -1
@@ -36,8 +36,8 @@ ifdef CONFIG_SPL_BUILD obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o +obj-$(CONFIG_DRAM_SUN8I_A33) += dram_sun8i_a33.o obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o -obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/
Signature · 1 line
2.7.4
PATCH 11/11 sunxi: Add DRAM_SUN8I_A83T kconfig entry
In reply to Jagan TekiAdd proper and simple kconfig option for dram_sun8i_a83t.c instead of using MACH type on Makefile.
--- arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-sunxi/Kconfig +7 -0
@@ -30,6 +30,12 @@ config DRAM_SUN8I_A33 Select this dram controller driver for Sun8i platforms, for A33 SOC. +config DRAM_SUN8I_A83T + bool "Sun8i A83T platform dram controller driver" + help + Select this dram controller driver for Sun8i platforms, + for A83T SOC. + config DRAM_SUN9I bool "Sun9i platform dram controller driver" help
@@ -193,6 +199,7 @@ config MACH_SUN8I_A33 config MACH_SUN8I_A83T bool "sun8i (Allwinner A83T)" select CPU_V7 + select DRAM_SUN8I_A83T select SUNXI_GEN_SUN6I select MMC_SUNXI_HAS_NEW_MODE select SUPPORT_SPL
arch/arm/mach-sunxi/Makefile +1 -1
@@ -37,8 +37,8 @@ obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o obj-$(CONFIG_DRAM_SUN8I_A33) += dram_sun8i_a33.o +obj-$(CONFIG_DRAM_SUN8I_A83T) += dram_sun8i_a83t.o obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o -obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/ endif
Signature · 1 line
2.7.4