fpga: Moved fpga u-boot headers to the Kconfig
Subsystems (2)
cover fpga: Moved fpga u-boot headers to the Kconfig
This series of patch moved fpga u-boot headers to the kconfig and enabled in respective defconfig. These are the configs:
-CONFIG_FPGA_SPARTAN3
-CONFIG_FPGA_ZYNQPL
Vipul Kumar (4):
fpga: Added Kconfig support for FPGA_SPARTAN3
fpga: Added CONFIG_FPGA_SPARTAN3 in the the respective defconfig
arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPL
arm: zynq: fpga: Added CONFIG_FPGA_ZYNQPL in the respective defconfig
configs/apf27_defconfig | 1 + configs/astro_mcf5373l_defconfig | 1 + configs/mt_ventoux_defconfig | 1 + configs/syzygy_hub_defconfig | 1 + configs/topic_miami_defconfig | 1 + configs/topic_miamilite_defconfig | 1 + configs/topic_miamiplus_defconfig | 1 + configs/x600_defconfig | 1 + configs/zynq_cc108_defconfig | 1 + configs/zynq_microzed_defconfig | 1 + configs/zynq_picozed_defconfig | 1 + configs/zynq_z_turn_defconfig | 1 + configs/zynq_zc702_defconfig | 1 + configs/zynq_zc706_defconfig | 1 + configs/zynq_zc770_xm010_defconfig | 1 + configs/zynq_zc770_xm011_defconfig | 1 + configs/zynq_zc770_xm011_x16_defconfig | 1 + configs/zynq_zc770_xm012_defconfig | 1 + configs/zynq_zc770_xm013_defconfig | 1 + configs/zynq_zed_defconfig | 1 + configs/zynq_zybo_defconfig | 1 + drivers/fpga/Kconfig | 12 ++++++++++++ include/configs/apf27.h | 1 - include/configs/astro_mcf5373l.h | 1 - include/configs/mt_ventoux.h | 1 - include/configs/x600.h | 1 - include/configs/zynq-common.h | 2 -- 27 files changed, 33 insertions(+), 6 deletions(-)
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
PATCH 1/4 fpga: Added Kconfig support for FPGA_SPARTAN3
This patch added Kconfig support for FPGA_SPARTAN3.
--- drivers/fpga/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)
drivers/fpga/Kconfig +5 -0
@@ -45,4 +45,9 @@ config FPGA_ZYNQMPPL Enable FPGA driver for loading bitstream in BIT and BIN format on Xilinx Zynq UltraScale+ (ZynqMP) device. +config FPGA_SPARTAN3 + bool "Enable Spartan3 FPGA driver" + help + Enable Spartan3 FPGA driver for loading in BIT format. + endmenu
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
PATCH 1/4 fpga: Added Kconfig support for FPGA_SPARTAN3
Quoted 4 lines · Vipul Kumar
This patch added
Kconfigsupport forFPGA_SPARTAN3.Signed-off-by Vipul Kumar <[email protected]>Signed-off-by Siva Durga Prasad Paladugu <[email protected]>
After merging 2/4 into this (we should always update the defconfigs in the patch, otherwise we may get build warnings later when bisecting), applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180228/8ddc5997/attachment.sig>
PATCH 1/4 fpga: Added Kconfig support for FPGA_SPARTAN3
Hi Tom,
Quoted 11 lines · Tom Rini
Quoted 4 lines · Vipul Kumar
This patch added
Kconfigsupport forFPGA_SPARTAN3.Signed-off-by Vipul Kumar <[email protected]>Signed-off-by Siva Durga Prasad Paladugu <[email protected]>After merging 2/4 into this (we should always update the defconfigs in the patch, otherwise we may get build warnings later when bisecting), applied to u-boot/master, thanks!
I am collecting these Kconfig patches in this branch (I have rebased it now)
http://git.denx.de/?p=u-boot/u-boot-microblaze.git;a=shortlog;h=refs/heads/kconfig
Do you want to get these patches before 2018.03 tag?
Thanks,
Michal
PATCH 1/4 fpga: Added Kconfig support for FPGA_SPARTAN3
Quoted 15 lines · Michal Simek
Hi Tom,
Quoted 11 lines · Tom Rini
Quoted 4 lines · Vipul Kumar
This patch added
Kconfigsupport forFPGA_SPARTAN3.Signed-off-by Vipul Kumar <[email protected]>Signed-off-by Siva Durga Prasad Paladugu <[email protected]>After merging 2/4 into this (we should always update the defconfigs in the patch, otherwise we may get build warnings later when bisecting), applied to u-boot/master, thanks!
Quoted 4 lines
I am collecting these
Kconfigpatches in this branch (I have rebased it now)
http://git.denx.de/?p=u-boot/u-boot-microblaze.git;a=shortlog;h=refs/heads/kconfigDo you want to get these patches before 2018.03 tag?
If they're size-neutral (or understandably why), yes. I can even give a pull and build, if you don't have a machine you can do that on easily (or don't want to setup a gcompute node or whatever).
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180301/425d2d26/attachment.sig>
PATCH 1/4 fpga: Added Kconfig support for FPGA_SPARTAN3
Quoted 16 lines · Tom Rini
Quoted 15 lines · Michal Simek
Hi Tom,
Quoted 11 lines · Tom Rini
Quoted 4 lines · Vipul Kumar
This patch added
Kconfigsupport forFPGA_SPARTAN3.Signed-off-by Vipul Kumar <[email protected]>Signed-off-by Siva Durga Prasad Paladugu <[email protected]>After merging 2/4 into this (we should always update the defconfigs in the patch, otherwise we may get build warnings later when bisecting), applied to u-boot/master, thanks!
Quoted 9 lines
Quoted 4 lines
I am collecting these
Kconfigpatches in this branch (I have rebased it now)
http://git.denx.de/?p=u-boot/u-boot-microblaze.git;a=shortlog;h=refs/heads/kconfigDo you want to get these patches before 2018.03 tag?
If they're size-neutral (or understandably why), yes. I can even give a pull and build, if you don't have a machine you can do that on easily (or don't want to setup a gcompute node or whatever).
Ok. They are supposed to be size neutral.
I will review that v2 which Vipul sent and will send you pull request when I am done.
Thanks,
Michal
PATCH 2/4 fpga: Added CONFIG_FPGA_SPARTAN3 in the the respective defconfig
In reply to Vipul KumarThis patch added CONFIG_FPGA_SPARTAN3 in the
respective defconfig.
--- configs/apf27_defconfig | 1 + configs/astro_mcf5373l_defconfig | 1 + configs/mt_ventoux_defconfig | 1 + configs/x600_defconfig | 1 + include/configs/apf27.h | 1 - include/configs/astro_mcf5373l.h | 1 - include/configs/mt_ventoux.h | 1 - include/configs/x600.h | 1 - 8 files changed, 4 insertions(+), 4 deletions(-)
configs/apf27_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand.0:1M(u-boot)ro,512K(env),512K(env2),5 CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_NAND=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_SPARTAN3=y CONFIG_MXC_GPIO=y CONFIG_MMC_MXC=y CONFIG_NAND=y
configs/astro_mcf5373l_defconfig +1 -0
@@ -19,4 +19,5 @@ CONFIG_CMD_JFFS2=y CONFIG_FPGA_ALTERA=y CONFIG_FPGA_CYCLON2=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_SPARTAN3=y CONFIG_MTD_NOR_FLASH=y
configs/mt_ventoux_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1m(u-boot),256k(env1),2 CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_NAND=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_SPARTAN3=y CONFIG_SYS_OMAP24_I2C_SPEED=400000 CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y
configs/x600_defconfig +1 -0
@@ -39,6 +39,7 @@ CONFIG_CMD_UBI=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_SPARTAN3=y CONFIG_SYS_I2C_DW=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y
include/configs/apf27.h +0 -1
@@ -209,7 +209,6 @@* FPGA */ #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA_SPARTAN3 #define CONFIG_SYS_FPGA_WAIT 250/* 250 ms */ #define CONFIG_SYS_FPGA_PROG_FEEDBACK #define CONFIG_SYS_FPGA_CHECK_CTRLC
include/configs/astro_mcf5373l.h +0 -1
@@ -175,7 +175,6 @@#define CONFIG_SYS_LONGHELP #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA_SPARTAN3 #define CONFIG_SYS_FPGA_PROG_FEEDBACK #define CONFIG_SYS_FPGA_WAIT 1000
include/configs/mt_ventoux.h +0 -1
@@ -33,7 +33,6 @@/* * FPGA */ -#define CONFIG_FPGA_SPARTAN3 #define CONFIG_SYS_FPGA_PROG_FEEDBACK #define CONFIG_SYS_FPGA_WAIT 10000#define CONFIG_MAX_FPGA_DEVICES 1
include/configs/x600.h +0 -1
@@ -85,7 +85,6 @@#define CONFIG_SYS_I2C_RTC_ADDR 0x68/* FPGA config options */ -#define CONFIG_FPGA_SPARTAN3 #define CONFIG_FPGA_COUNT 1/* USB EHCI options */
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
PATCH 3/4 arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPL
In reply to Vipul KumarThis patch added Kconfig support for CONFIG_FPGA_ZYNQPL.
--- drivers/fpga/Kconfig | 7 +++++++ 1 file changed, 7 insertions(+)
drivers/fpga/Kconfig +7 -0
@@ -50,4 +50,11 @@ config FPGA_SPARTAN3 help Enable Spartan3 FPGA driver for loading in BIT format. +config FPGA_ZYNQPL + bool "Enable Xilinx FPGA for Zynq" + depends on ARCH_ZYNQ + help + Enable FPGA driver for loading bitstream in BIT and BIN format + on Xilinx Zynq devices. + endmenu
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
PATCH 3/4 arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPL
Quoted 4 lines · Vipul Kumar
This patch added
Kconfigsupport forCONFIG_FPGA_ZYNQPL.Signed-off-by Vipul Kumar <[email protected]>Signed-off-by Siva Durga Prasad Paladugu <[email protected]>
After merging 4/4 into this (we should always update the defconfigs in the patch, otherwise we may get build warnings later when bisecting), applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180228/d39c90b1/attachment.sig>
PATCH 4/4 arm: zynq: fpga: Added CONFIG_FPGA_ZYNQPL in the respective defconfig
In reply to Vipul KumarThis patch added CONFIG_FPGA_ZYNQPL in the respective defconfig.
--- configs/syzygy_hub_defconfig | 1 + configs/topic_miami_defconfig | 1 + configs/topic_miamilite_defconfig | 1 + configs/topic_miamiplus_defconfig | 1 + configs/zynq_cc108_defconfig | 1 + configs/zynq_microzed_defconfig | 1 + configs/zynq_picozed_defconfig | 1 + configs/zynq_z_turn_defconfig | 1 + configs/zynq_zc702_defconfig | 1 + configs/zynq_zc706_defconfig | 1 + configs/zynq_zc770_xm010_defconfig | 1 + configs/zynq_zc770_xm011_defconfig | 1 + configs/zynq_zc770_xm011_x16_defconfig | 1 + configs/zynq_zc770_xm012_defconfig | 1 + configs/zynq_zc770_xm013_defconfig | 1 + configs/zynq_zed_defconfig | 1 + configs/zynq_zybo_defconfig | 1 + include/configs/zynq-common.h | 2 -- 18 files changed, 17 insertions(+), 2 deletions(-)
configs/syzygy_hub_defconfig +1 -0
@@ -33,6 +33,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/topic_miami_defconfig +1 -0
@@ -30,6 +30,7 @@ CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/topic_miamilite_defconfig +1 -0
@@ -30,6 +30,7 @@ CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/topic_miamiplus_defconfig +1 -0
@@ -28,6 +28,7 @@ CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_cc108_defconfig +1 -0
@@ -26,6 +26,7 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_microzed_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_picozed_defconfig +1 -0
@@ -29,6 +29,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_z_turn_defconfig +1 -0
@@ -30,6 +30,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_zc702_defconfig +1 -0
@@ -39,6 +39,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_zc706_defconfig +1 -0
@@ -39,6 +39,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_zc770_xm010_defconfig +1 -0
@@ -31,6 +31,7 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_zc770_xm011_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_CMD_CACHE=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BLK=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y # CONFIG_MMC is not set CONFIG_NAND=y
configs/zynq_zc770_xm011_x16_defconfig +1 -0
@@ -30,6 +30,7 @@ CONFIG_CMD_CACHE=y CONFIG_OF_EMBED=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y # CONFIG_MMC is not set CONFIG_DM_MMC=y
configs/zynq_zc770_xm012_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BLK=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y # CONFIG_MMC is not set CONFIG_MTD_NOR_FLASH=y
configs/zynq_zc770_xm013_defconfig +1 -0
@@ -33,6 +33,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BLK=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y
configs/zynq_zed_defconfig +1 -0
@@ -34,6 +34,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
configs/zynq_zybo_defconfig +1 -0
@@ -38,6 +38,7 @@ CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y CONFIG_DM_GPIO=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y
include/configs/zynq-common.h +0 -2
@@ -276,8 +276,6 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) -/* Enable the PL to be downloaded */ -#define CONFIG_FPGA_ZYNQPL /* FIT support */ #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */
--
2.7.4
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
Michal Simek
Appliedcover fpga: Moved fpga u-boot headers to the Kconfig
In reply to Vipul KumarQuoted 32 lines · Vipul Kumar
This series of patch moved fpga u-boot headers to the kconfig and enabled in respective defconfig. These are the configs:
(quoted diff) +0
-2-CONFIG_FPGA_SPARTAN3 -CONFIG_FPGA_ZYNQPLVipul Kumar (4):
fpga: AddedKconfigsupport forFPGA_SPARTAN3
fpga: AddedCONFIG_FPGA_SPARTAN3in the the respective defconfig
arm: zynq: fpga: AddedKconfigsupport forCONFIG_FPGA_ZYNQPL
arm: zynq: fpga: AddedCONFIG_FPGA_ZYNQPLin the respective defconfigconfigs/apf27_defconfig | 1 + configs/astro_mcf5373l_defconfig | 1 + configs/mt_ventoux_defconfig | 1 + configs/syzygy_hub_defconfig | 1 + configs/topic_miami_defconfig | 1 + configs/topic_miamilite_defconfig | 1 + configs/topic_miamiplus_defconfig | 1 + configs/x600_defconfig | 1 + configs/zynq_cc108_defconfig | 1 + configs/zynq_microzed_defconfig | 1 + configs/zynq_picozed_defconfig | 1 + configs/zynq_z_turn_defconfig | 1 + configs/zynq_zc702_defconfig | 1 + configs/zynq_zc706_defconfig | 1 + configs/zynq_zc770_xm010_defconfig | 1 + configs/zynq_zc770_xm011_defconfig | 1 + configs/zynq_zc770_xm011_x16_defconfig | 1 + configs/zynq_zc770_xm012_defconfig | 1 + configs/zynq_zc770_xm013_defconfig | 1 + configs/zynq_zed_defconfig | 1 +
Quoted 9 lines
configs/zynq_zybo_defconfig | 1 + drivers/fpga/Kconfig | 12 ++++++++++++ include/configs/apf27.h | 1 - include/configs/astro_mcf5373l.h | 1 - include/configs/mt_ventoux.h | 1 - include/configs/x600.h | 1 - include/configs/zynq-common.h | 2 -- 27 files changed, 33 insertions(+), 6 deletions(-)
Applied.
Thanks,
Michal