Skip to contentSkip to conversation

Cleanup in staging speakup driver

PATCH Superseded Santha Meena Ramamoorthy 2 participants 6 messages Feb 21, 2018 Staging

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover Cleanup in staging speakup driver

Do coding style cleanup to improve readability and maintainability.

Santha Meena Ramamoorthy (3):
staging: speakup: add spaces around arithmetic operators
staging: speakup: match alignment with open paranthesis
staging: speakup: remove space after a cast

 drivers/staging/speakup/speakup_dtlk.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/3 staging: speakup: add spaces around arithmetic operators

add space around arithmetic operators ('+', '-' and '*') to conform to Linux kernel coding style. Problem found using checkpatch.

---
 drivers/staging/speakup/speakup_dtlk.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/staging/speakup/speakup_dtlk.c +8 -7
index f8cb83c..df31f8b 100644
@@ -287,7 +287,7 @@ static struct synth_settings *synth_interrogate(struct spk_synth *synth)
 	}
 	t = buf;
 	/* serial number is little endian */
-	status.serial_number = t[0] + t[1]*256;
+	status.serial_number = t[0] + t[1] * 256;
 	t += 2;
 	for (i = 0; *t != '\r'; t++) {
 		status.rom_version[i] = *t;
@@ -326,13 +326,13 @@ static int synth_probe(struct spk_synth *synth)
 				speakup_info.port_tts);
 		if ((port_forced & 0xf) != 0xf)
 			pr_info("warning: port base should probably end with f\n");
-		if (synth_request_region(speakup_info.port_tts-1,
+		if (synth_request_region(speakup_info.port_tts - 1,
 					SYNTH_IO_EXTENT)) {
 			pr_warn("sorry, port already reserved\n");
 			return -EBUSY;
 		}
-		port_val = inw(speakup_info.port_tts-1);
-		synth_lpc = speakup_info.port_tts-1;
+		port_val = inw(speakup_info.port_tts - 1);
+		synth_lpc = speakup_info.port_tts - 1;
 	} else {
 		for (i = 0; synth_portlist[i]; i++) {
 			if (synth_request_region(synth_portlist[i],
@@ -341,7 +341,7 @@ static int synth_probe(struct spk_synth *synth)
 			port_val = inw(synth_portlist[i]) & 0xfbff;
 			if (port_val == 0x107f) {
 				synth_lpc = synth_portlist[i];
-				speakup_info.port_tts = synth_lpc+1;
+				speakup_info.port_tts = synth_lpc + 1;
 				break;
 			}
 			synth_release_region(synth_portlist[i],
@@ -359,7 +359,7 @@ static int synth_probe(struct spk_synth *synth)
 		cpu_relax(); /* wait until it's ready */
 	sp = synth_interrogate(synth);
 	pr_info("%s: %03x-%03x, ROM ver %s, s/n %u, driver: %s\n",
-		synth->long_name, synth_lpc, synth_lpc+SYNTH_IO_EXTENT - 1,
+		synth->long_name, synth_lpc, synth_lpc + SYNTH_IO_EXTENT - 1,
 		sp->rom_version, sp->serial_number, synth->version);
 	synth->alive = 1;
 	return 0;
@@ -369,7 +369,8 @@ static void dtlk_release(void)
 {
 	spk_stop_serial_interrupt();
 	if (speakup_info.port_tts)
-		synth_release_region(speakup_info.port_tts-1, SYNTH_IO_EXTENT);
+		synth_release_region(speakup_info.port_tts - 1,
+				     SYNTH_IO_EXTENT);
 	speakup_info.port_tts = 0;
 }
 
Signature · 1 line
2.7.4
#2 lore raw

Re: [Outreachy kernel] [PATCH 1/3] staging: speakup: add spaces around arithmetic operators

Quoted 2 lines · Santha Meena Ramamoorthy

add space around arithmetic operators ('+', '-' and '*') to conform to Linux kernel coding style. Problem found using checkpatch.

Could you update this one to start the log message with a capital letter?

You will need to send the whole series again, and note where things changes and where they did not. See the tutorial.

thanks,
julia

Quoted 74 lines
---
 drivers/staging/speakup/speakup_dtlk.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/staging/speakup/speakup_dtlk.c +8 -8
index f8cb83c..df31f8b 100644
@@ -287,7 +287,7 @@ static struct synth_settings *synth_interrogate(struct spk_synth *synth)
 	}
 	t = buf;
 	/* serial number is little endian */
-	status.serial_number = t[0] + t[1]*256;
+	status.serial_number = t[0] + t[1] * 256;
 	t += 2;
 	for (i = 0; *t != '\r'; t++) {
 		status.rom_version[i] = *t;
@@ -326,13 +326,13 @@ static int synth_probe(struct spk_synth *synth)
 				speakup_info.port_tts);
 		if ((port_forced & 0xf) != 0xf)
 			pr_info("warning: port base should probably end with f\n");
-		if (synth_request_region(speakup_info.port_tts-1,
+		if (synth_request_region(speakup_info.port_tts - 1,
 					SYNTH_IO_EXTENT)) {
 			pr_warn("sorry, port already reserved\n");
 			return -EBUSY;
 		}
-		port_val = inw(speakup_info.port_tts-1);
-		synth_lpc = speakup_info.port_tts-1;
+		port_val = inw(speakup_info.port_tts - 1);
+		synth_lpc = speakup_info.port_tts - 1;
 	} else {
 		for (i = 0; synth_portlist[i]; i++) {
 			if (synth_request_region(synth_portlist[i],
@@ -341,7 +341,7 @@ static int synth_probe(struct spk_synth *synth)
 			port_val = inw(synth_portlist[i]) & 0xfbff;
 			if (port_val == 0x107f) {
 				synth_lpc = synth_portlist[i];
-				speakup_info.port_tts = synth_lpc+1;
+				speakup_info.port_tts = synth_lpc + 1;
 				break;
 			}
 			synth_release_region(synth_portlist[i],
@@ -359,7 +359,7 @@ static int synth_probe(struct spk_synth *synth)
 		cpu_relax(); /* wait until it's ready */
 	sp = synth_interrogate(synth);
 	pr_info("%s: %03x-%03x, ROM ver %s, s/n %u, driver: %s\n",
-		synth->long_name, synth_lpc, synth_lpc+SYNTH_IO_EXTENT - 1,
+		synth->long_name, synth_lpc, synth_lpc + SYNTH_IO_EXTENT - 1,
 		sp->rom_version, sp->serial_number, synth->version);
 	synth->alive = 1;
 	return 0;
@@ -369,7 +369,8 @@ static void dtlk_release(void)
 {
 	spk_stop_serial_interrupt();
 	if (speakup_info.port_tts)
-		synth_release_region(speakup_info.port_tts-1, SYNTH_IO_EXTENT);
+		synth_release_region(speakup_info.port_tts - 1,
+				     SYNTH_IO_EXTENT);
 	speakup_info.port_tts = 0;
 }
 
--

2.7.4

--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1519239357-9527-2-git-send-email-santhameena13%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

#3 lore raw

Re: [Outreachy kernel] [PATCH 1/3] staging: speakup: add spaces around arithmetic operators

Quoted 7 lines · Julia Lawall
Quoted 2 lines · Santha Meena Ramamoorthy

add space around arithmetic operators ('+', '-' and '*') to conform to Linux kernel coding style. Problem found using checkpatch.

Quoted 7 lines

Could you update this one to start the log message with a capital letter?

You will need to send the whole series again, and note where things changes and where they did not. See the tutorial.

thanks,
julia

Sorry for the silly mistake. I have changed it and submitted v2. Thanks :)

Quoted 74 lines
Quoted 74 lines
---
 drivers/staging/speakup/speakup_dtlk.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)
drivers/staging/speakup/speakup_dtlk.c +8 -8
index f8cb83c..df31f8b 100644
@@ -287,7 +287,7 @@ static struct synth_settings *synth_interrogate(struct spk_synth *synth)
 	}
 	t = buf;
 	/* serial number is little endian */
-	status.serial_number = t[0] + t[1]*256;
+	status.serial_number = t[0] + t[1] * 256;
 	t += 2;
 	for (i = 0; *t != '\r'; t++) {
 		status.rom_version[i] = *t;
@@ -326,13 +326,13 @@ static int synth_probe(struct spk_synth *synth)
 				speakup_info.port_tts);
 		if ((port_forced & 0xf) != 0xf)
 			pr_info("warning: port base should probably end with f\n");
-		if (synth_request_region(speakup_info.port_tts-1,
+		if (synth_request_region(speakup_info.port_tts - 1,
 					SYNTH_IO_EXTENT)) {
 			pr_warn("sorry, port already reserved\n");
 			return -EBUSY;
 		}
-		port_val = inw(speakup_info.port_tts-1);
-		synth_lpc = speakup_info.port_tts-1;
+		port_val = inw(speakup_info.port_tts - 1);
+		synth_lpc = speakup_info.port_tts - 1;
 	} else {
 		for (i = 0; synth_portlist[i]; i++) {
 			if (synth_request_region(synth_portlist[i],
@@ -341,7 +341,7 @@ static int synth_probe(struct spk_synth *synth)
 			port_val = inw(synth_portlist[i]) & 0xfbff;
 			if (port_val == 0x107f) {
 				synth_lpc = synth_portlist[i];
-				speakup_info.port_tts = synth_lpc+1;
+				speakup_info.port_tts = synth_lpc + 1;
 				break;
 			}
 			synth_release_region(synth_portlist[i],
@@ -359,7 +359,7 @@ static int synth_probe(struct spk_synth *synth)
 		cpu_relax(); /* wait until it's ready */
 	sp = synth_interrogate(synth);
 	pr_info("%s: %03x-%03x, ROM ver %s, s/n %u, driver: %s\n",
-		synth->long_name, synth_lpc, synth_lpc+SYNTH_IO_EXTENT - 1,
+		synth->long_name, synth_lpc, synth_lpc + SYNTH_IO_EXTENT - 1,
 		sp->rom_version, sp->serial_number, synth->version);
 	synth->alive = 1;
 	return 0;
@@ -369,7 +369,8 @@ static void dtlk_release(void)
 {
 	spk_stop_serial_interrupt();
 	if (speakup_info.port_tts)
-		synth_release_region(speakup_info.port_tts-1, SYNTH_IO_EXTENT);
+		synth_release_region(speakup_info.port_tts - 1,
+				     SYNTH_IO_EXTENT);
 	speakup_info.port_tts = 0;
 }
 
--

2.7.4

--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/1519239357-9527-2-git-send-email-santhameena13%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

#4 lore raw

PATCH 2/3 staging: speakup: match alignment with open paranthesis

In reply to Santha Meena Ramamoorthy

Match alignment with open paranthesis to conform to Linux kernel coding style. Problem found using checkpatch.

---
 drivers/staging/speakup/speakup_dtlk.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/speakup/speakup_dtlk.c +4 -4
index df31f8b..f109b51 100644
@@ -323,11 +323,11 @@ static int synth_probe(struct spk_synth *synth)
 	if (port_forced) {
 		speakup_info.port_tts = port_forced;
 		pr_info("probe forced to %x by kernel command line\n",
-				speakup_info.port_tts);
+			speakup_info.port_tts);
 		if ((port_forced & 0xf) != 0xf)
 			pr_info("warning: port base should probably end with f\n");
 		if (synth_request_region(speakup_info.port_tts - 1,
-					SYNTH_IO_EXTENT)) {
+					 SYNTH_IO_EXTENT)) {
 			pr_warn("sorry, port already reserved\n");
 			return -EBUSY;
 		}
@@ -336,7 +336,7 @@ static int synth_probe(struct spk_synth *synth)
 	} else {
 		for (i = 0; synth_portlist[i]; i++) {
 			if (synth_request_region(synth_portlist[i],
-						SYNTH_IO_EXTENT))
+						 SYNTH_IO_EXTENT))
 				continue;
 			port_val = inw(synth_portlist[i]) & 0xfbff;
 			if (port_val == 0x107f) {
@@ -345,7 +345,7 @@ static int synth_probe(struct spk_synth *synth)
 				break;
 			}
 			synth_release_region(synth_portlist[i],
-					SYNTH_IO_EXTENT);
+					     SYNTH_IO_EXTENT);
 		}
 	}
 	port_val &= 0xfbff;
Signature · 1 line
2.7.4
#5 lore raw

PATCH 3/3 staging: speakup: remove space after a cast

In reply to Santha Meena Ramamoorthy

Remove blank space after a cast to conform to Linux kernel coding style. Problem found using checkpatch.

---
 drivers/staging/speakup/speakup_dtlk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/speakup/speakup_dtlk.c +1 -1
index f109b51..dbebed0 100644
@@ -266,7 +266,7 @@ static char synth_read_tts(void)
 	outb_p(ch, speakup_info.port_tts);
 	while (synth_readable())
 		cpu_relax();
-	return (char) ch;
+	return (char)ch;
 }
 
 /* interrogate the DoubleTalk PC and return its settings */
Signature · 1 line
2.7.4