drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
Subsystems (2)
PATCH v11 1/6 drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
GuC related exported functions should start with "intel_guc_" prefix and pass intel_guc as the first parameter since its GuC related. Current guc_ggtt_offset() failed to follow this code convention and this is a problem for future patches that needs to access intel_guc data to verify the GGTT offset against the GuC WOPCM top.
This patch renames the guc_ggtt_offset to intel_guc_ggtt_offset and updates the related code to pass intel_guc pointer to this function call, so that we can have a unified coding style for GuC code and also enable the future patches to get GuC related data from intel_guc to do the offset verification. Meanwhile, this patch also moves the GUC_GGTT_TOP from intel_guc_regs.h to intel_guc.h since it is not GuC register related definition.
v8:
- Fixed coding style issues and moved GUC_GGTT_TOP to intel_guc.h (Sagar)
- Updated commit message to explain to reason and motivation to add intel_guc as the first parameter of intel_guc_ggtt_offset (Chris)
v9:
- Fixed code alignment issue due to line break (Chris)
v10:
- Removed unnecessary comments, redundant code and avoided reuse variable to avoid potential issues (Joonas)
--- drivers/gpu/drm/i915/intel_guc.c | 11 ++++++----- drivers/gpu/drm/i915/intel_guc.h | 14 ++++++++++++-- drivers/gpu/drm/i915/intel_guc_ads.c | 8 ++++---- drivers/gpu/drm/i915/intel_guc_ct.c | 5 +++-- drivers/gpu/drm/i915/intel_guc_fw.c | 2 +- drivers/gpu/drm/i915/intel_guc_log.c | 2 +- drivers/gpu/drm/i915/intel_guc_reg.h | 3 --- drivers/gpu/drm/i915/intel_guc_submission.c | 10 +++++----- drivers/gpu/drm/i915/intel_huc.c | 6 ++++-- 9 files changed, 36 insertions(+), 25 deletions(-)
drivers/gpu/drm/i915/intel_guc.c +6 -5
@@ -269,8 +269,9 @@ void intel_guc_init_params(struct intel_guc *guc)/* If GuC submission is enabled, set up additional parameters here */ if (USES_GUC_SUBMISSION (dev_priv)) { -u32 ads =guc_ggtt_offset (guc->ads_vma) >>PAGE_SHIFT ; -u32 pgs =guc_ggtt_offset (dev_priv->guc.stage_desc_pool); +u32 ads =intel_guc_ggtt_offset (guc, + guc->ads_vma) >>PAGE_SHIFT ; +u32 pgs =intel_guc_ggtt_offset (guc, guc->stage_desc_pool);u32 ctx_in_16 =GUC_MAX_STAGE_DESCRIPTORS /16 ; params[GUC_CTL_DEBUG ] |= ads <<GUC_ADS_ADDR_SHIFT ;
@@ -418,7 +419,7 @@ int intel_guc_suspend(struct drm_i915_private *dev_priv) data[0 ] =INTEL_GUC_ACTION_ENTER_S_STATE ;/* any value greater than GUC_POWER_D0 */ data[1 ] =GUC_POWER_D1 ; - data[2 ] =guc_ggtt_offset (guc->shared_data); + data[2 ] =intel_guc_ggtt_offset (guc, guc->shared_data);return intel_guc_send (guc, data,ARRAY_SIZE (data)); }
@@ -441,7 +442,7 @@ int intel_guc_reset_engine(struct intel_guc *guc, data[3 ] =0 ; data[4 ] =0 ; data[5 ] = guc->execbuf_client->stage_id; - data[6 ] =guc_ggtt_offset (guc->shared_data); + data[6 ] =intel_guc_ggtt_offset (guc, guc->shared_data);return intel_guc_send (guc, data,ARRAY_SIZE (data)); }
@@ -463,7 +464,7 @@ int intel_guc_resume(struct drm_i915_private *dev_priv) data[0 ] =INTEL_GUC_ACTION_EXIT_S_STATE ; data[1 ] =GUC_POWER_D0 ; - data[2 ] =guc_ggtt_offset (guc->shared_data); + data[2 ] =intel_guc_ggtt_offset (guc, guc->shared_data);return intel_guc_send (guc, data,ARRAY_SIZE (data)); }
drivers/gpu/drm/i915/intel_guc.h +12 -2
@@ -100,13 +100,23 @@ static inline void intel_guc_notify(struct intel_guc *guc) guc->notify (guc); } -/* +/* GuC addresses above GUC_GGTT_TOP also don't map through the GTT */ +#define GUC_GGTT_TOP 0xFEE00000 + +/** +* intel_guc_ggtt_offset() - Get and validate the GGTT offset of @vma +* @guc: intel_guc structure. +* @vma: i915 graphics virtual memory area. +* * GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP), * which is reserved for Boot ROM, SRAM and WOPCM. Currently this top address is * 512K. In order to exclude 0-512K address space from GGTT, all gfx objects * used by GuC is pinned with PIN_OFFSET_BIAS along with size of WOPCM. +* +* Return: GGTT offset that meets the GuC gfx address requirement. */ -static inline u32 guc_ggtt_offset (struct i915_vma *vma) +static inline u32 intel_guc_ggtt_offset (struct intel_guc *guc, +struct i915_vma *vma) {u32 offset =i915_ggtt_offset (vma);
drivers/gpu/drm/i915/intel_guc_ads.c +4 -4
@@ -75,7 +75,7 @@ static void guc_policies_init(struct guc_policies *policies)int intel_guc_ads_create (struct intel_guc *guc) {struct drm_i915_private *dev_priv =guc_to_i915 (guc); -struct i915_vma *vma; +struct i915_vma *vma, *kernel_ctx_vma;struct page *page;/* The ads obj includes the struct itself and buffers passed to GuC */ struct {
@@ -121,9 +121,9 @@ int intel_guc_ads_create(struct intel_guc *guc)* to find it. Note that we have to skip our header (1 page), * because our GuC shared data is there. */ + kernel_ctx_vma = dev_priv->kernel_context->engine[RCS ].state; blob->ads.golden_context_lrca = -guc_ggtt_offset (dev_priv->kernel_context->engine[RCS ].state) + - skipped_offset; +intel_guc_ggtt_offset (guc, kernel_ctx_vma) + skipped_offset;/* * The GuC expects us to exclude the portion of the context image that
@@ -135,7 +135,7 @@ int intel_guc_ads_create(struct intel_guc *guc) blob->ads.eng_state_size[engine->guc_id] = engine->context_size - skipped_size; - base =guc_ggtt_offset (vma); + base =intel_guc_ggtt_offset (guc, vma); blob->ads.scheduler_policies = base +ptr_offset (blob, policies); blob->ads.reg_state_buffer = base +ptr_offset (blob, reg_state_buffer); blob->ads.reg_state_addr = base +ptr_offset (blob, reg_state);
drivers/gpu/drm/i915/intel_guc_ct.c +3 -2
@@ -156,7 +156,8 @@ static int ctch_init(struct intel_guc *guc, err =PTR_ERR (blob); goto err_vma; } -DRM_DEBUG_DRIVER ("CT: vma base=%#x\n" ,guc_ggtt_offset (ctch->vma)); +DRM_DEBUG_DRIVER ("CT: vma base=%#x\n" , +intel_guc_ggtt_offset (guc, ctch->vma));/* store pointers to desc and cmds */ for (i =0 ; i <ARRAY_SIZE (ctch->ctbs); i++) {
@@ -202,7 +203,7 @@ static int ctch_open(struct intel_guc *guc, }/* vma should be already allocated and map'ed */ - base =guc_ggtt_offset (ctch->vma); + base =intel_guc_ggtt_offset (guc, ctch->vma);/* (re)initialize descriptors * cmds buffers are in the second half of the blob page
drivers/gpu/drm/i915/intel_guc_fw.c +1 -1
@@ -165,7 +165,7 @@ static int guc_xfer_ucode(struct intel_guc *guc, struct i915_vma *vma)I915_WRITE (DMA_COPY_SIZE , guc_fw->header_size + guc_fw->ucode_size);/* Set the source address for the new blob */ - offset =guc_ggtt_offset (vma) + guc_fw->header_offset; + offset =intel_guc_ggtt_offset (guc, vma) + guc_fw->header_offset;I915_WRITE (DMA_ADDR_0_LOW ,lower_32_bits (offset));I915_WRITE (DMA_ADDR_0_HIGH ,upper_32_bits (offset) &0xFFFF );
drivers/gpu/drm/i915/intel_guc_log.c +1 -1
@@ -638,7 +638,7 @@ int intel_guc_log_create(struct intel_guc *guc) (GUC_LOG_ISR_PAGES <<GUC_LOG_ISR_SHIFT ) | (GUC_LOG_CRASH_PAGES <<GUC_LOG_CRASH_SHIFT ); - offset =guc_ggtt_offset (vma) >>PAGE_SHIFT ;/* in pages */ + offset =intel_guc_ggtt_offset (guc, vma) >>PAGE_SHIFT ; guc->log.flags = (offset <<GUC_LOG_BUF_ADDR_SHIFT ) | flags;return 0 ;
drivers/gpu/drm/i915/intel_guc_reg.h +0 -3
@@ -80,9 +80,6 @@#define GUC_WOPCM_TOP (0x80 << 12)/* 512KB */ #define BXT_GUC_WOPCM_RC6_RESERVED (0x10 << 12)/* 64KB */ -/* GuC addresses above GUC_GGTT_TOP also don't map through the GTT */ -#define GUC_GGTT_TOP 0xFEE00000 -#define GEN8_GT_PM_CONFIG _MMIO(0x138140)#define GEN9LP_GT_PM_CONFIG _MMIO(0x138140)#define GEN9_GT_PM_CONFIG _MMIO(0x13816c)
drivers/gpu/drm/i915/intel_guc_submission.c +5 -5
@@ -386,8 +386,8 @@ static void guc_stage_desc_init(struct intel_guc *guc, lrc->context_desc =lower_32_bits (ce->lrc_desc);/* The state page is after PPHWSP */ - lrc->ring_lrca = -guc_ggtt_offset (ce->state) +LRC_STATE_PN *PAGE_SIZE ; + lrc->ring_lrca =intel_guc_ggtt_offset (guc, ce->state) + +LRC_STATE_PN *PAGE_SIZE ;/* XXX: In direct submission, the GuC wants the HW context id * here. In proxy submission, it wants the stage id
@@ -395,7 +395,7 @@ static void guc_stage_desc_init(struct intel_guc *guc, lrc->context_id = (client->stage_id <<GUC_ELC_CTXID_OFFSET ) | (guc_engine_id <<GUC_ELC_ENGINE_OFFSET ); - lrc->ring_begin =guc_ggtt_offset (ce->ring->vma); + lrc->ring_begin =intel_guc_ggtt_offset (guc, ce->ring->vma); lrc->ring_end = lrc->ring_begin + ce->ring->size -1 ; lrc->ring_next_free_location = lrc->ring_begin; lrc->ring_current_tail_pointer_value =0 ;
@@ -411,7 +411,7 @@ static void guc_stage_desc_init(struct intel_guc *guc,* The doorbell, process descriptor, and workqueue are all parts * of the client object, which the GuC will reference via the GGTT */ - gfx_addr =guc_ggtt_offset (client->vma); + gfx_addr =intel_guc_ggtt_offset (guc, client->vma); desc->db_trigger_phy =sg_dma_address (client->vma->pages->sgl) + client->doorbell_offset; desc->db_trigger_cpu =ptr_to_u64 (__get_doorbell (client));
@@ -584,7 +584,7 @@ static void inject_preempt_context(struct work_struct *work) data[3 ] = engine->guc_id; data[4 ] = guc->execbuf_client->priority; data[5 ] = guc->execbuf_client->stage_id; - data[6 ] =guc_ggtt_offset (guc->shared_data); + data[6 ] =intel_guc_ggtt_offset (guc, guc->shared_data);if (WARN_ON (intel_guc_send (guc, data,ARRAY_SIZE (data)))) { execlists_clear_active(&engine->execlists,
drivers/gpu/drm/i915/intel_huc.c +4 -2
@@ -138,7 +138,8 @@ static int huc_ucode_xfer(struct intel_uc_fw *huc_fw, struct i915_vma *vma)intel_uncore_forcewake_get (dev_priv,FORCEWAKE_ALL );/* Set the source address for the uCode */ - offset =guc_ggtt_offset (vma) + huc_fw->header_offset; + offset =intel_guc_ggtt_offset (&dev_priv->guc, vma) + + huc_fw->header_offset;I915_WRITE (DMA_ADDR_0_LOW ,lower_32_bits (offset));I915_WRITE (DMA_ADDR_0_HIGH ,upper_32_bits (offset) &0xFFFF );
@@ -214,7 +215,8 @@ int intel_huc_auth(struct intel_huc *huc) } ret =intel_guc_auth_huc (guc, -guc_ggtt_offset (vma) + huc->fw.rsa_offset); +intel_guc_ggtt_offset (guc, vma) + + huc->fw.rsa_offset);if (ret) {DRM_ERROR ("HuC: GuC did not ack Auth request %d\n" , ret); goto out;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v11 2/6 drm/i915: Implement dynamic GuC WOPCM offset and size calculation
Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check.
This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes.
v2:
- Removed intel_wopcm_init (Ville/Sagar/Joonas)
- Renamed and Moved the intel_wopcm_partition into intel_guc (Sagar)
- Removed unnecessary function calls (Joonas)
- Init GuC WOPCM partition as soon as firmware fetching is completed
v3:
- Fixed indentation issues (Chris)
- Removed layering violation code (Chris/Michal)
- Created separat files for GuC wopcm code (Michal)
- Used inline function to avoid code duplication (Michal)
v4:
- Preset the GuC WOPCM top during early GuC init (Chris)
- Fail intel_uc_init_hw() as soon as GuC WOPCM partitioning failed
v5:
- Moved GuC DMA WOPCM register updating code into intel_wopcm.c
- Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas)
v6:
- Made sure the GuC WOPCM size to be multiple of 4K (4K aligned)
v8:
- Updated comments and fixed naming issues (Sagar/Joonas)
- Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar)
v9:
- Minor changes variable names and code comments (Sagar)
- Added detailed GuC WOPCM layout drawing (Sagar/Michal)
- Refined macro definitions to be reader friendly (Michal)
- Removed redundent check to valid flag (Michal)
- Unified first parameter for exported GuC WOPCM functions (Michal)
- Refined the name and parameter list of hardware restriction checking functions (Michal)
v10:
- Used shorter function name for internal functions (Joonas)
- Moved init-ealry function into c file (Joonas)
- Consolidated and removed redundant size checks (Joonas/Michal)
- Removed unnecessary unlikely() from code which is only called once during boot (Joonas)
- More fixes to kernel-doc format and content (Michal)
- Avoided the use of PAGE_MASK for 4K pages (Michal)
- Added error log messages to error paths (Michal)
v11:
- Replaced intel_guc_wopcm with more generic intel_wopcm and attached intel_wopcm to drm_i915_private instead intel_guc (Michal)
- dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal)
- Moved WOPCM marco definitions into .c source file (Michal)
- Exported WOPCM layout diagram as kernel-doc (Michal)
Bspec: 12690
--- drivers/gpu/drm/i915/Makefile | 3 +- drivers/gpu/drm/i915/i915_drv.c | 1 + drivers/gpu/drm/i915/i915_drv.h | 8 ++ drivers/gpu/drm/i915/i915_gem.c | 4 + drivers/gpu/drm/i915/i915_gem_context.c | 5 +- drivers/gpu/drm/i915/intel_guc.c | 66 ++++++++--- drivers/gpu/drm/i915/intel_guc.h | 16 ++- drivers/gpu/drm/i915/intel_guc_reg.h | 8 +- drivers/gpu/drm/i915/intel_huc.c | 2 +- drivers/gpu/drm/i915/intel_uc.c | 6 +- drivers/gpu/drm/i915/intel_uc_fw.c | 13 +-- drivers/gpu/drm/i915/intel_uc_fw.h | 16 +++ drivers/gpu/drm/i915/intel_wopcm.c | 195 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_wopcm.h | 34 ++++++ 14 files changed, 337 insertions(+), 40 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_wopcm.c create mode 100644 drivers/gpu/drm/i915/intel_wopcm.h
drivers/gpu/drm/i915/Makefile +2 -1
@@ -78,7 +78,8 @@ i915-y += i915_cmd_parser.o \ intel_lrc.o \ intel_mocs.o \ intel_ringbuffer.o \ - intel_uncore.o + intel_uncore.o \ + intel_wopcm.o # general-purpose microcontroller (GuC) support i915-y += intel_uc.o \
drivers/gpu/drm/i915/i915_drv.c +1 -0
@@ -918,6 +918,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,mutex_init (&dev_priv->wm.wm_mutex);mutex_init (&dev_priv->pps_mutex); +intel_wopcm_init_early (&dev_priv->wopcm);intel_uc_init_early (dev_priv);i915_memcpy_init_early (dev_priv);
drivers/gpu/drm/i915/i915_drv.h +8 -0
@@ -65,6 +65,7 @@#include "intel_ringbuffer.h" #include "intel_uncore.h" #include "intel_uc.h" +#include "intel_wopcm.h" #include "i915_gem.h" #include "i915_gem_context.h"
@@ -1860,6 +1861,8 @@ struct drm_i915_private {struct intel_gvt *gvt; +struct intel_wopcm wopcm; +struct intel_huc huc;struct intel_guc guc;
@@ -2391,6 +2394,11 @@ static inline struct drm_i915_private *kdev_to_i915(struct device *kdev)return to_i915 (dev_get_drvdata (kdev)); } +static inline struct drm_i915_private *wopcm_to_i915 (struct intel_wopcm *wopcm) +{ + return container_of(wopcm, struct drm_i915_private, wopcm); +} +static inline struct drm_i915_private *guc_to_i915 (struct intel_guc *guc) { return container_of(guc, struct drm_i915_private, guc);
drivers/gpu/drm/i915/i915_gem.c +4 -0
@@ -5279,6 +5279,10 @@ int i915_gem_init(struct drm_i915_private *dev_priv)if (ret)return ret; + ret =intel_wopcm_init (&dev_priv->wopcm); +if (ret) +return ret; + ret =intel_uc_init_misc (dev_priv);if (ret)return ret;
drivers/gpu/drm/i915/i915_gem_context.c +3 -2
@@ -312,12 +312,13 @@ __create_hw_context(struct drm_i915_private *dev_priv, ctx->desc_template =default_desc_template (dev_priv, dev_priv->mm.aliasing_ppgtt); -/* GuC requires the ring to be placed above GUC_WOPCM_TOP. If GuC is not +/* +* GuC requires the ring to be placed in Non-WOPCM memory. If GuC is not * present or not in use we still need a small bias as ring wraparound * at offset 0 sometimes hangs. No idea why. */ if (USES_GUC (dev_priv)) - ctx->ggtt_offset_bias =GUC_WOPCM_TOP ; + ctx->ggtt_offset_bias = dev_priv->guc.ggtt_pin_bias;else ctx->ggtt_offset_bias =I915_GTT_PAGE_SIZE ;
drivers/gpu/drm/i915/intel_guc.c +53 -13
87 lines not on this page · raw message
drivers/gpu/drm/i915/intel_guc.h +10 -6
@@ -49,6 +49,9 @@ struct intel_guc {struct intel_guc_log log;struct intel_guc_ct ct; +/** @ggtt_pin_bias: offset where Non-WOPCM memory starts. */ +u32 ggtt_pin_bias; +/* Log snapshot if GuC errors during load */ struct drm_i915_gem_object *load_err_log;
@@ -108,10 +111,11 @@ static inline void intel_guc_notify(struct intel_guc *guc)* @guc: intel_guc structure. * @vma: i915 graphics virtual memory area. * -* GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP), -* which is reserved for Boot ROM, SRAM and WOPCM. Currently this top address is -* 512K. In order to exclude 0-512K address space from GGTT, all gfx objects -* used by GuC is pinned with PIN_OFFSET_BIAS along with size of WOPCM. +* GuC does not allow any gfx GGTT address that falls into range +* [0, GuC ggtt_pin_bias), which is reserved for Boot ROM, SRAM and WOPCM. +* Currently, in order to exclude [0, GuC ggtt_pin_bias) address space from +* GGTT, all gfx objects used by GuC is allocated with intel_guc_allocate_vma() +* and pinned with PIN_OFFSET_BIAS along with the value of GuC ggtt_pin_bias. * * Return: GGTT offset that meets the GuC gfx address requirement. */
@@ -120,7 +124,7 @@ static inline u32 intel_guc_ggtt_offset(struct intel_guc *guc, {u32 offset =i915_ggtt_offset (vma); -GEM_BUG_ON (offset <GUC_WOPCM_TOP ); +GEM_BUG_ON (offset < guc->ggtt_pin_bias);GEM_BUG_ON (range_overflows_t (u64, offset, vma->size,GUC_GGTT_TOP ));return offset;
@@ -129,6 +133,7 @@ static inline u32 intel_guc_ggtt_offset(struct intel_guc *guc,void intel_guc_init_early (struct intel_guc *guc);void intel_guc_init_send_regs (struct intel_guc *guc);void intel_guc_init_params (struct intel_guc *guc); +void intel_guc_init_ggtt_pin_bias (struct intel_guc *guc);int intel_guc_init_wq (struct intel_guc *guc);void intel_guc_fini_wq (struct intel_guc *guc);int intel_guc_init (struct intel_guc *guc);
@@ -140,6 +145,5 @@ int intel_guc_auth_huc(struct intel_guc *guc, u32 rsa_offset);int intel_guc_suspend (struct drm_i915_private *dev_priv);int intel_guc_resume (struct drm_i915_private *dev_priv);struct i915_vma *intel_guc_allocate_vma (struct intel_guc *guc,u32 size); -u32 intel_guc_wopcm_size (struct drm_i915_private *dev_priv);#endif
drivers/gpu/drm/i915/intel_guc_reg.h +3 -5
@@ -68,17 +68,15 @@#define DMA_GUC_WOPCM_OFFSET _MMIO(0xc340)#define HUC_LOADING_AGENT_VCR (0<<1)#define HUC_LOADING_AGENT_GUC (1<<1) -#define GUC_WOPCM_OFFSET_VALUE 0x80000/* 512KB */ +#define GUC_WOPCM_OFFSET_SHIFT 14#define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)#define HUC_STATUS2 _MMIO(0xD3B0)#define HUC_FW_VERIFIED (1<<7) -/* Defines WOPCM space available to GuC firmware */ #define GUC_WOPCM_SIZE _MMIO(0xc050) -/* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */ -#define GUC_WOPCM_TOP (0x80 << 12)/* 512KB */ -#define BXT_GUC_WOPCM_RC6_RESERVED (0x10 << 12)/* 64KB */ +#define GUC_WOPCM_SIZE_SHIFT 12 +#define GUC_WOPCM_SIZE_MASK (0xfffff << GUC_WOPCM_SIZE_SHIFT)#define GEN8_GT_PM_CONFIG _MMIO(0x138140)#define GEN9LP_GT_PM_CONFIG _MMIO(0x138140)
drivers/gpu/drm/i915/intel_huc.c +1 -1
@@ -207,7 +207,7 @@ int intel_huc_auth(struct intel_huc *huc)return -ENOEXEC ; vma =i915_gem_object_ggtt_pin (huc->fw.obj,NULL ,0 ,0 , -PIN_OFFSET_BIAS |GUC_WOPCM_TOP ); +PIN_OFFSET_BIAS | guc->ggtt_pin_bias);if (IS_ERR (vma)) { ret =PTR_ERR (vma);DRM_ERROR ("HuC: Failed to pin huc fw object %d\n" , ret);
drivers/gpu/drm/i915/intel_uc.c +4 -2
@@ -248,6 +248,8 @@ int intel_uc_init_misc(struct drm_i915_private *dev_priv)if (!USES_GUC (dev_priv))return 0 ; +intel_guc_init_ggtt_pin_bias (guc); + ret =intel_guc_init_wq (guc);if (ret) {DRM_ERROR ("Couldn't allocate workqueues for GuC\n" );
@@ -340,9 +342,9 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)gen9_reset_guc_interrupts (dev_priv);/* init WOPCM */ -I915_WRITE (GUC_WOPCM_SIZE ,intel_guc_wopcm_size (dev_priv)); +I915_WRITE (GUC_WOPCM_SIZE , dev_priv->wopcm.guc.size);I915_WRITE (DMA_GUC_WOPCM_OFFSET , -GUC_WOPCM_OFFSET_VALUE |HUC_LOADING_AGENT_GUC ); + dev_priv->wopcm.guc.base |HUC_LOADING_AGENT_GUC );/* WaEnableuKernelHeaderValidFix:skl */ /* WaEnableGuCBootHashCheckNotSet:skl,bxt,kbl */
drivers/gpu/drm/i915/intel_uc_fw.c +3 -10
@@ -95,15 +95,6 @@ void intel_uc_fw_fetch(struct drm_i915_private *dev_priv, uc_fw->ucode_offset = uc_fw->header_offset + uc_fw->header_size; uc_fw->ucode_size = (css->size_dw - css->header_size_dw) *sizeof (u32); -/* Header and uCode will be loaded to WOPCM */ - size = uc_fw->header_size + uc_fw->ucode_size; -if (size >intel_guc_wopcm_size (dev_priv)) { -DRM_WARN ("%s: Firmware is too large to fit in WOPCM\n" , -intel_uc_fw_type_repr (uc_fw->type)); - err = -E2BIG ; - goto fail; - } -/* now RSA */ if (css->key_size_dw !=UOS_RSA_SCRATCH_COUNT ) { DRM_WARN("%s: Mismatched firmware RSA key size (%u)\n",
@@ -208,6 +199,7 @@ int intel_uc_fw_upload(struct intel_uc_fw *uc_fw,int (*xfer)(struct intel_uc_fw *uc_fw, struct i915_vma *vma)) { +struct drm_i915_private *i915 =to_i915 (uc_fw->obj->base.dev);struct i915_vma *vma;int err;
@@ -231,7 +223,8 @@ int intel_uc_fw_upload(struct intel_uc_fw *uc_fw, } vma =i915_gem_object_ggtt_pin (uc_fw->obj,NULL ,0 ,0 , -PIN_OFFSET_BIAS |GUC_WOPCM_TOP ); +PIN_OFFSET_BIAS | + i915->guc.ggtt_pin_bias);if (IS_ERR (vma)) { err =PTR_ERR (vma); DRM_DEBUG_DRIVER("%s fw ggtt-pin err=%d\n",
drivers/gpu/drm/i915/intel_uc_fw.h +16 -0
@@ -115,6 +115,22 @@ static inline bool intel_uc_fw_is_selected(struct intel_uc_fw *uc_fw)return uc_fw->path !=NULL ; } +/** +* intel_uc_fw_get_size() - Get the size of the firmware. +* @uc_fw: uC firmware. +* +* Get the size of the firmware that will be placed in WOPCM. +* +* Return: Size of the firmware, or zero on firmware fetch failure. +*/ +static inline u32 intel_uc_fw_get_size (struct intel_uc_fw *uc_fw) +{ +if (uc_fw->fetch_status !=INTEL_UC_FIRMWARE_SUCCESS ) +return 0 ; + +return uc_fw->header_size + uc_fw->ucode_size; +} +void intel_uc_fw_fetch (struct drm_i915_private *dev_priv,struct intel_uc_fw *uc_fw); int intel_uc_fw_upload(struct intel_uc_fw *uc_fw,
drivers/gpu/drm/i915/intel_wopcm.c new file +195 -0
195 lines not on this page · raw message
drivers/gpu/drm/i915/intel_wopcm.h new file +34 -0
@@ -0,0 +1,34 @@ +/* +* SPDX-License-Identifier: MIT +* +* Copyright © 2017-2018 Intel Corporation +*/ + +#ifndef _INTEL_WOPCM_H_ +#define _INTEL_WOPCM_H_ + +#include <linux/types.h> + +/** +* struct intel_wopcm - overall WOPCM info and WOPCM regions. +* @size: size of overall WOPCM. +* @guc: GuC WOPCM Region info. +*/ +struct intel_wopcm { +u32 size; +struct { +/** +* @base: GuC WOPCM base which is offset from WOPCM base. +*/ +u32 base; +/** +* @size: size of the GuC WOPCM region. +*/ +u32 size; + } guc; +}; + +void intel_wopcm_init_early (struct intel_wopcm *wopcm); +int intel_wopcm_init (struct intel_wopcm *wopcm); + +#endif
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v11 2/6] drm/i915: Implement dynamic GuC WOPCM offset and size calculation
Quoted 136 lines · Jackie Li
Hardware may have specific restrictions on GuC WOPCM offset and size. On Gen9, the value of the GuC WOPCM size register needs to be larger than the value of GuC WOPCM offset register + a Gen9 specific offset (144KB) for reserved GuC WOPCM. Fail to enforce such a restriction on GuC WOPCM size will lead to GuC firmware execution failures. On the other hand, with current static GuC WOPCM offset and size values (512KB for both offset and size), the GuC WOPCM size verification will fail on Gen9 even if it can be fixed by lowering the GuC WOPCM offset by calculating its value based on HuC firmware size (which is likely less than 200KB on Gen9), so that we can have a GuC WOPCM size value which is large enough to pass the GuC WOPCM size check.
This patch updates the reserved GuC WOPCM size for RC6 context on Gen9 to 24KB to strictly align with the Gen9 GuC WOPCM layout. It also adds support to verify the GuC WOPCM size aganist the Gen9 hardware restrictions. To meet all above requirements, let's provide dynamic partitioning of the WOPCM that will be based on platform specific HuC/GuC firmware sizes.
v2:
- Removedintel_wopcm_init(Ville/Sagar/Joonas)
- Renamed and Moved theintel_wopcm_partitionintointel_guc(Sagar)
- Removed unnecessary function calls (Joonas)
- Init GuC WOPCM partition as soon as firmware fetching is completedv3:
- Fixed indentation issues (Chris)
- Removed layering violation code (Chris/Michal)
- Created separat files for GuC wopcm code (Michal)
- Used inline function to avoid code duplication (Michal)v4:
- Preset the GuC WOPCM top during early GuC init (Chris)
- Failintel_uc_init_hw()as soon as GuC WOPCM partitioning failedv5:
- Moved GuC DMA WOPCM register updating code intointel_wopcm.c
- Took care of the locking status before writing to GuC DMA Write-Once registers. (Joonas)v6:
- Made sure the GuC WOPCM size to be multiple of 4K (4K aligned)v8:
- Updated comments and fixed naming issues (Sagar/Joonas)
- Updated commit message to include more description about the hardware restriction on GuC WOPCM size (Sagar)v9:
- Minor changes variable names and code comments (Sagar)
- Added detailed GuC WOPCM layout drawing (Sagar/Michal)
- Refined macro definitions to be reader friendly (Michal)
- Removed redundent check to valid flag (Michal)
- Unified first parameter for exported GuC WOPCM functions (Michal)
- Refined the name and parameter list of hardware restriction checking functions (Michal)v10:
- Used shorter function name for internal functions (Joonas)
- Moved init-ealry function into c file (Joonas)
- Consolidated and removed redundant size checks (Joonas/Michal)
- Removed unnecessaryunlikely()from code which is only called once during boot (Joonas)
- More fixes to kernel-doc format and content (Michal)
- Avoided the use ofPAGE_MASKfor 4K pages (Michal)
- Added error log messages to error paths (Michal)v11:
- Replacedintel_guc_wopcmwith more genericintel_wopcmand attachedintel_wopcmtodrm_i915_privateinsteadintel_guc(Michal)
- dynamic calculation of GuC non-wopcm memory start (a.k.a WOPCM Top offset from GuC WOPCM base) (Michal)
- Moved WOPCM marco definitions into .c source file (Michal)
- Exported WOPCM layout diagram as kernel-doc (Michal)Bspec: 12690
Cc Michal Wajdeczko <[email protected]>Cc Sagar Arun Kamble <[email protected]>Cc Sujaritha Sundaresan <[email protected]>Cc Daniele Ceraolo Spurio <[email protected]>Cc John Spotswood <[email protected]>Cc Oscar Mateo <[email protected]>Cc Chris Wilson <[email protected]>Cc Joonas Lahtinen <[email protected]>Reviewed-by Sagar Arun Kamble <[email protected]> (v8)Reviewed-by Joonas Lahtinen <[email protected]> (v9)Signed-off-by Jackie Li <[email protected]>--- drivers/gpu/drm/i915/Makefile | 3 +- drivers/gpu/drm/i915/i915_drv.c | 1 + drivers/gpu/drm/i915/i915_drv.h | 8 ++ drivers/gpu/drm/i915/i915_gem.c | 4 + drivers/gpu/drm/i915/i915_gem_context.c | 5 +- drivers/gpu/drm/i915/intel_guc.c | 66 ++++++++--- drivers/gpu/drm/i915/intel_guc.h | 16 ++- drivers/gpu/drm/i915/intel_guc_reg.h | 8 +- drivers/gpu/drm/i915/intel_huc.c | 2 +- drivers/gpu/drm/i915/intel_uc.c | 6 +- drivers/gpu/drm/i915/intel_uc_fw.c | 13 +-- drivers/gpu/drm/i915/intel_uc_fw.h | 16 +++ drivers/gpu/drm/i915/intel_wopcm.c | 195 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_wopcm.h | 34 ++++++ 14 files changed, 337 insertions(+), 40 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_wopcm.c create mode 100644 drivers/gpu/drm/i915/intel_wopcm.hdrivers/gpu/drm/i915/Makefile +2
-1@@ -78,7 +78,8 @@ i915-y += i915_cmd_parser.o \ intel_lrc.o \ intel_mocs.o \ intel_ringbuffer.o \ - intel_uncore.o + intel_uncore.o \ + intel_wopcm.o # general-purpose microcontroller (GuC) support i915-y += intel_uc.o \drivers/gpu/drm/i915/i915_drv.c +1
-0@@ -918,6 +918,7 @@ static int i915_driver_init_early(struct drm_i915_private *dev_priv,mutex_init (&dev_priv->wm.wm_mutex);mutex_init (&dev_priv->pps_mutex); +intel_wopcm_init_early (&dev_priv->wopcm);intel_uc_init_early (dev_priv);i915_memcpy_init_early (dev_priv);drivers/gpu/drm/i915/i915_drv.h +0
-0
drivers/gpu/drm/i915/i915_drv.h line 68
Quoted 4 lines
drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -65,6 +65,7 @@#include "intel_ringbuffer.h" #include "intel_uncore.h" #include "intel_uc.h" +#include "intel_wopcm.h"
bikeshed: maybe we should include wopcm before uc to match field order in the struct drm_i915_private?
Quoted 327 lines
drivers/gpu/drm/i915/i915_drv.h +7
-0#include "i915_gem.h" #include "i915_gem_context.h" @@ -1860,6 +1861,8 @@ struct drm_i915_private {struct intel_gvt *gvt; +struct intel_wopcm wopcm; +struct intel_huc huc;struct intel_guc guc;@@ -2391,6 +2394,11 @@ static inline struct drm_i915_private *kdev_to_i915(struct device *kdev)return to_i915 (dev_get_drvdata (kdev)); } +static inline struct drm_i915_private *wopcm_to_i915 (struct intel_wopcm *wopcm) +{ + return container_of(wopcm, struct drm_i915_private, wopcm); +} +static inline struct drm_i915_private *guc_to_i915 (struct intel_guc *guc){
drivers/gpu/drm/i915/i915_drv.h +0
-0return container_of(guc, struct drm_i915_private, guc);drivers/gpu/drm/i915/i915_gem.c +4
-0@@ -5279,6 +5279,10 @@ int i915_gem_init(struct drm_i915_private *dev_priv)if (ret)return ret; + ret =intel_wopcm_init (&dev_priv->wopcm); +if (ret) +return ret; + ret =intel_uc_init_misc (dev_priv);if (ret)return ret;drivers/gpu/drm/i915/i915_gem_context.c +0
-1@@ -312,12 +312,13 @@ __create_hw_context(struct drm_i915_private *dev_priv, ctx->desc_template =default_desc_template (dev_priv, dev_priv->mm.aliasing_ppgtt); -/* GuC requires the ring to be placed above GUC_WOPCM_TOP. If GuC is not
drivers/gpu/drm/i915/i915_gem_context.c +2
-0+/* +* GuC requires the ring to be placed in Non-WOPCM memory. If GuC is not
drivers/gpu/drm/i915/i915_gem_context.c +1
-1* present or not in use we still need a small bias as ring wraparound * at offset 0 sometimes hangs. No idea why. */ if (USES_GUC (dev_priv)) - ctx->ggtt_offset_bias =GUC_WOPCM_TOP ; + ctx->ggtt_offset_bias = dev_priv->guc.ggtt_pin_bias;else ctx->ggtt_offset_bias =I915_GTT_PAGE_SIZE ;drivers/gpu/drm/i915/intel_guc.c +28
-0@@ -470,6 +470,57 @@ int intel_guc_resume(struct drm_i915_private *dev_priv) }/** +* DOC: GuC Address Space +* +* The layout of GuC address space is shown as below: +* +* +==============> +====================+ <== GUC_GGTT_TOP +* ^ | | +* | | | +* | | DRAM | +* | | Memory | +* | | | +* GuC | | +* Address +========> +====================+ <== WOPCM Top +* Space ^ | HW contexts RSVD | +* | | | WOPCM | +* | | +==> +--------------------+ <== GuC WOPCM Top +* | GuC ^ | | +* | GGTT | | | +* | Pin GuC | GuC | +* | Bias WOPCM | WOPCM | +* | | Size | | +* | | | | | +* v v v | | +* +=====+=====+==> +====================+ <== GuC WOPCM Base +* | Non-GuC WOPCM | +* | (HuC/Reserved) | +* +====================+ <== WOPCM Base +* +* The lower part [0, GuC ggtt_pin_bias) was mapped to WOPCM which consists of
+ * GuC WOPCM and WOPCM reserved for other usage (e.g.RC6 context). The value of
+ * the GuCggtt_pin_biasis determined by the actually GuC WOPCM size which is
+ * set inGUC_WOPCM_SIZEregister.
+ */drivers/gpu/drm/i915/intel_guc.c +3
-0+ +/** +* intel_guc_init_ggtt_pin_bias() - Initialize the GuC ggtt_pin_bias value.
+ * @guc:intel_gucstructure.
+ *
+ * This functional will calculate and initialize theggtt_pin_biasvalue based
+ * on overall WOPCM size and GuC WOPCM size.
+ */drivers/gpu/drm/i915/intel_guc.c +11
-0+void intel_guc_init_ggtt_pin_bias (struct intel_guc *guc) +{ +struct drm_i915_private *i915 =guc_to_i915 (guc); + +GEM_BUG_ON (!i915->wopcm.size); +GEM_BUG_ON (i915->wopcm.size < i915->wopcm.guc.base); + + guc->ggtt_pin_bias = i915->wopcm.size - i915->wopcm.guc.base; +} + +/** * intel_guc_allocate_vma() - Allocate a GGTT VMA for GuC usage * @guc: the guc * @size: size of area to allocate (both virtual space and memory) @@ -477,7 +528,7 @@ int intel_guc_resume(struct drm_i915_private *dev_priv) * This is a wrapper to create an object for use with the GuC. In orderto
* use it inside the GuC, an object needs to be pinned lifetime, so we
allocate
* both some backing storage and a range inside the Global GTT. We must
pin
- * it in the GGTT somewhere other than than [0,GUC_WOPCM_TOP) because that
+ * it in the GGTT somewhere other than than [0, GUCggtt_pin_bias) because that
* range is reserved inside GuC.
*
* Return: Ai915_vmaif successful, otherwise anERR_PTR.drivers/gpu/drm/i915/intel_guc.c +1
-12@@ -498,7 +549,7 @@ struct i915_vma *intel_guc_allocate_vma(struct intel_guc *guc, u32 size) goto err; ret =i915_vma_pin (vma,0 ,PAGE_SIZE , -PIN_GLOBAL |PIN_OFFSET_BIAS |GUC_WOPCM_TOP ); +PIN_GLOBAL |PIN_OFFSET_BIAS | guc->ggtt_pin_bias);if (ret) { vma =ERR_PTR (ret); goto err;@@ -510,14 +561,3 @@ struct i915_vma *intel_guc_allocate_vma(struct intel_guc *guc, u32 size)i915_gem_object_put (obj );return vma; } - -u32 intel_guc_wopcm_size (struct drm_i915_private *dev_priv) -{ -u32 wopcm_size =GUC_WOPCM_TOP ; - -/* On BXT, the top of WOPCM is reserved for RC6 context */ -if (IS_GEN9_LP (dev_priv)) - wopcm_size -=BXT_GUC_WOPCM_RC6_RESERVED ; - -return wopcm_size; -}drivers/gpu/drm/i915/intel_guc.h +3
-2@@ -49,6 +49,9 @@ struct intel_guc {struct intel_guc_log log;struct intel_guc_ct ct; +/** @ggtt_pin_bias: offset where Non-WOPCM memory starts. */ +u32 ggtt_pin_bias; +/* Log snapshot if GuC errors during load */ struct drm_i915_gem_object *load_err_log;@@ -108,10 +111,11 @@ static inline void intel_guc_notify(struct intel_guc *guc) * @guc: intel_guc structure. * @vma: i915 graphics virtual memory area. * - * GuC does not allow any gfx GGTT address that falls into range [0, WOPCM_TOP), - * which is reserved for Boot ROM, SRAM and WOPCM. Currently this topaddress is
- * 512K. In order to exclude 0-512K address space from GGTT, all gfx objects
- * used by GuC is pinned withPIN_OFFSET_BIASalong with size of WOPCM.
+ * GuC does not allow any gfx GGTT address that falls into range
+ * [0, GuCggtt_pin_bias), which is reserved for Boot ROM, SRAM and WOPCM.
+ * Currently, in order to exclude [0, GuCggtt_pin_bias) address space from
+ * GGTT, all gfx objects used by GuC is allocated withintel_guc_allocate_vma()
+ * and pinned withPIN_OFFSET_BIASalong with the value of GuCggtt_pin_bias.
*
* Return: GGTT offset that meets the GuC gfx address requirement. */drivers/gpu/drm/i915/intel_guc.h +2
-1@@ -120,7 +124,7 @@ static inline u32 intel_guc_ggtt_offset(struct intel_guc *guc, {u32 offset =i915_ggtt_offset (vma); -GEM_BUG_ON (offset <GUC_WOPCM_TOP ); +GEM_BUG_ON (offset < guc->ggtt_pin_bias);GEM_BUG_ON (range_overflows_t (u64, offset, vma->size,GUC_GGTT_TOP ));return offset;@@ -129,6 +133,7 @@ static inline u32 intel_guc_ggtt_offset(structintel_guc *guc, void intel_guc_init_early(struct intel_guc *guc);void intel_guc_init_send_regs (struct intel_guc *guc);void intel_guc_init_params (struct intel_guc *guc); +void intel_guc_init_ggtt_pin_bias (struct intel_guc *guc);int intel_guc_init_wq (struct intel_guc *guc);void intel_guc_fini_wq (struct intel_guc *guc);int
intel_guc_init(struct intel_guc *guc);drivers/gpu/drm/i915/intel_guc.h +0
-1@@ -140,6 +145,5 @@ int intel_guc_auth_huc(struct intel_guc *guc, u32 rsa_offset);int intel_guc_suspend (struct drm_i915_private *dev_priv);int intel_guc_resume (struct drm_i915_private *dev_priv);struct i915_vma *intel_guc_allocate_vma (struct intel_guc *guc,u32 size); -u32 intel_guc_wopcm_size (struct drm_i915_private *dev_priv);#endif
drivers/gpu/drm/i915/intel_guc_reg.h +3
-5@@ -68,17 +68,15 @@#define DMA_GUC_WOPCM_OFFSET _MMIO(0xc340)#define HUC_LOADING_AGENT_VCR (0<<1)#define HUC_LOADING_AGENT_GUC (1<<1) -#define GUC_WOPCM_OFFSET_VALUE 0x80000/* 512KB */ +#define GUC_WOPCM_OFFSET_SHIFT 14#define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)#define HUC_STATUS2 _MMIO(0xD3B0)#define HUC_FW_VERIFIED (1<<7) -/* Defines WOPCM space available to GuC firmware */ #define GUC_WOPCM_SIZE _MMIO(0xc050) -/* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */ -#define GUC_WOPCM_TOP (0x80 << 12)/* 512KB */ -#define BXT_GUC_WOPCM_RC6_RESERVED (0x10 << 12)/* 64KB */ +#define GUC_WOPCM_SIZE_SHIFT 12 +#define GUC_WOPCM_SIZE_MASK (0xfffff << GUC_WOPCM_SIZE_SHIFT)#define GEN8_GT_PM_CONFIG _MMIO(0x138140)#define GEN9LP_GT_PM_CONFIG _MMIO(0x138140)drivers/gpu/drm/i915/intel_huc.c +1
-1@@ -207,7 +207,7 @@ int intel_huc_auth(struct intel_huc *huc)return -ENOEXEC ; vma =i915_gem_object_ggtt_pin (huc->fw.obj,NULL ,0 ,0 , -PIN_OFFSET_BIAS |GUC_WOPCM_TOP ); +PIN_OFFSET_BIAS | guc->ggtt_pin_bias);if (IS_ERR (vma)) { ret =PTR_ERR (vma);DRM_ERROR ("HuC: Failed to pin huc fw object %d\n" , ret);drivers/gpu/drm/i915/intel_uc.c +4
-2@@ -248,6 +248,8 @@ int intel_uc_init_misc(struct drm_i915_private *dev_priv)if (!USES_GUC (dev_priv))return 0 ; +intel_guc_init_ggtt_pin_bias (guc); + ret =intel_guc_init_wq (guc);if (ret) {DRM_ERROR ("Couldn't allocate workqueues for GuC\n" );@@ -340,9 +342,9 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)gen9_reset_guc_interrupts (dev_priv);/* init WOPCM */ -I915_WRITE (GUC_WOPCM_SIZE ,intel_guc_wopcm_size (dev_priv)); +I915_WRITE (GUC_WOPCM_SIZE , dev_priv->wopcm.guc.size);I915_WRITE (DMA_GUC_WOPCM_OFFSET , -GUC_WOPCM_OFFSET_VALUE |HUC_LOADING_AGENT_GUC ); + dev_priv->wopcm.guc.base |HUC_LOADING_AGENT_GUC );/* WaEnableuKernelHeaderValidFix:skl */ /* WaEnableGuCBootHashCheckNotSet:skl,bxt,kbl */ drivers/gpu/drm/i915/intel_uc_fw.c +3
-10@@ -95,15 +95,6 @@ void intel_uc_fw_fetch(struct drm_i915_private *dev_priv, uc_fw->ucode_offset = uc_fw->header_offset + uc_fw->header_size; uc_fw->ucode_size = (css->size_dw - css->header_size_dw) *sizeof (u32); -/* Header and uCode will be loaded to WOPCM */ - size = uc_fw->header_size + uc_fw->ucode_size; -if (size >intel_guc_wopcm_size (dev_priv)) { -DRM_WARN ("%s: Firmware is too large to fit in WOPCM\n" , -intel_uc_fw_type_repr (uc_fw->type)); - err = -E2BIG ; - goto fail; - } -/* now RSA */ if (css->key_size_dw !=UOS_RSA_SCRATCH_COUNT ) { DRM_WARN("%s: Mismatched firmware RSA key size (%u)\n",@@ -208,6 +199,7 @@ int intel_uc_fw_upload(struct intel_uc_fw *uc_fw,int (*xfer)(struct intel_uc_fw *uc_fw, struct i915_vma *vma)) { +struct drm_i915_private *i915 =to_i915 (uc_fw->obj->base.dev);struct i915_vma *vma;int err;@@ -231,7 +223,8 @@ int intel_uc_fw_upload(struct intel_uc_fw *uc_fw, } vma =i915_gem_object_ggtt_pin (uc_fw->obj,NULL ,0 ,0 , -PIN_OFFSET_BIAS |GUC_WOPCM_TOP ); +PIN_OFFSET_BIAS | + i915->guc.ggtt_pin_bias);if (IS_ERR (vma)) { err =PTR_ERR (vma); DRM_DEBUG_DRIVER("%s fw ggtt-pin err=%d\n",drivers/gpu/drm/i915/intel_uc_fw.h +0
-0@@ -115,6 +115,22 @@ static inline bool intel_uc_fw_is_selected(struct intel_uc_fw *uc_fw)return uc_fw->path !=NULL ;
drivers/gpu/drm/i915/intel_uc_fw.h static inline bool intel_uc_fw_is_selected(struct · line 126
Quoted 10 lines
drivers/gpu/drm/i915/intel_uc_fw.h +9
-0} +/** +* intel_uc_fw_get_size() - Get the size of the firmware. +* @uc_fw: uC firmware. +* +* Get the size of the firmware that will be placed in WOPCM. +* +* Return: Size of the firmware, or zero on firmware fetch failure. +*/ +static inline u32 intel_uc_fw_get_size (struct intel_uc_fw *uc_fw)
bikeshed: as we already have size field in uc_fw maybe this function should be named as intel_uc_fw_get_upload_size() to show difference?
Quoted 44 lines
drivers/gpu/drm/i915/intel_uc_fw.h +7
-0+{ +if (uc_fw->fetch_status !=INTEL_UC_FIRMWARE_SUCCESS ) +return 0 ; + +return uc_fw->header_size + uc_fw->ucode_size; +} +void intel_uc_fw_fetch (struct drm_i915_private *dev_priv,struct intel_uc_fw *uc_fw); int intel_uc_fw_upload(struct intel_uc_fw *uc_fw,drivers/gpu/drm/i915/intel_wopcm.c new file +13
-0@@ -0,0 +1,195 @@ +/* +* SPDX-License-Identifier: MIT +* +* Copyright © 2017-2018 Intel Corporation +*/ + +#include "intel_wopcm.h" +#include "i915_drv.h" + +/** +* DOC: WOPCM Layout. +* +* The layout of the WOPCM will be fixed after writing to GuC WOPCM size and
+ * offset registers whose are calculated are determined by size of HuC/GuC
+ * firmware size and set of hw requirements/restrictions as shown below:.
+ *+ * +=========> +====================+ <== WOPCM Top + * ^ | HW contexts RSVD | + * | +===> +====================+ <== GuC WOPCM Top + * | ^ | | + * | | | | + * | | | | + * | GuC | | + * | WOPCM | | + * | Size +--------------------+ <== (Platform specific reserved
Quoted 1 line
size)
bikeshed: as most of the values here are (or maybe in the future) platform specific, I would drop this extra comment from diagram.
Quoted 43 lines
+ * WOPCM | | GuC FW RSVD | + * | | +--------------------+ + * | | | GuC Stack RSVD | + * | | +------------------- + + * | v | GuC WOPCM RSVD | + * | +===> +====================+ <== GuC WOPCM base + * | | WOPCM RSVD | + * | +------------------- + <== HuC Firmware Top + * v | HuC FW | + * +=========> +====================+ <== WOPCM Base+ *
+ * GuC accessible WOPCM starts at GuC WOPCM base and ends at GuC WOPCM top.
+ * The top part of the WOPCM is reserved for hardware contexts (e.g. RC6
+ * context).
+ */drivers/gpu/drm/i915/intel_wopcm.c new file +20
-0+ +/* Default WOPCM size 1MB. */ +#define GEN9_WOPCM_SIZE (1024 * 1024) +/* 16KB WOPCM (RSVD WOPCM) is reserved from HuC firmware top. */ +#define WOPCM_RESERVED_SIZE (16 * 1024) + +/* 16KB reserved at the beginning of GuC WOPCM. */ +#define GUC_WOPCM_RESERVED (16 * 1024) +/* 8KB from GUC_WOPCM_RESERVED is reserved for GuC stack. */ +#define GUC_WOPCM_STACK_RESERVED (8 * 1024) + +/* GuC WOPCM Offset value needs to be aligned to 16KB. */ +#define GUC_WOPCM_OFFSET_ALIGNMENT (1UL << GUC_WOPCM_OFFSET_SHIFT) + +/* 24KB at the end of WOPCM is reserved for RC6 CTX on BXT. */ +#define BXT_WOPCM_RC6_CTX_RESERVED (24 * 1024) + +/* 128KB from GUC_WOPCM_RESERVED is reserved for FW on Gen9. */ +#define GEN9_GUC_FW_RESERVED (128 * 1024) +#define GEN9_GUC_WOPCM_OFFSET (GUC_WOPCM_RESERVED +
GEN9_GUC_FW_RESERVED)drivers/gpu/drm/i915/intel_wopcm.c new file +6
-0+ +/** +* intel_wopcm_init_early() - Early initialization of the GuC WOPCM. +* @wopcm: pointer to intel_wopcm. +* +* Setup the GuC WOPCM top to the top of the overall WOPCM. This will
Quoted 1 line
guarantee
hmm, I'm not sure that description matches code: s/top/size ?
Quoted 3 lines
+ * that the allocation of the GuC accessible objects won't fall into WOPCM when
+ * GuC partition isn't present.
hmm, I'm not sure referring GuC here is correct:
GuC partition will not exist only when there is no Guc or whole WOPCM partitioning failed, and in both cases we will not use the Guc...
Quoted 69 lines
+ */
drivers/gpu/drm/i915/intel_wopcm.c new file +16
-0+void intel_wopcm_init_early (struct intel_wopcm *wopcm) +{ + wopcm->size =GEN9_WOPCM_SIZE ; + +DRM_DEBUG_DRIVER ("WOPCM size: %uKiB\n" , wopcm->size /1024 ); +} + +static inline u32 context_reserved_size (struct drm_i915_private *i915) +{ +if (IS_GEN9_LP (i915)) +return BXT_WOPCM_RC6_CTX_RESERVED ; +else +return 0 ; +} + +static inline int gen9_check_dword_gap(u32 guc_wopcm_base, u32
guc_wopcm_size)drivers/gpu/drm/i915/intel_wopcm.c new file +6
-0+{ +u32 offset; + +/* +* GuC WOPCM size shall be at least a dword larger than the offset from +* WOPCM base (GuC WOPCM offset from WOPCM base +
GEN9_GUC_WOPCM_OFFSET)drivers/gpu/drm/i915/intel_wopcm.c new file +32
-0+* due to hardware limitation on Gen9. +*/ + offset = guc_wopcm_base +GEN9_GUC_WOPCM_OFFSET ; +if (offset > guc_wopcm_size || + (guc_wopcm_size - offset) <sizeof (u32)) { +DRM_ERROR ("GuC WOPCM size(%uKiB) is too small.%uKiB needed.\n" , + guc_wopcm_size /1024 , + (u32)(offset +sizeof (u32)) /1024 ); +return -E2BIG ; + } + +return 0 ; +} + +static inline int check_hw_restriction (struct drm_i915_private *i915, +u32 guc_wopcm_base,u32 guc_wopcm_size) +{ +int err =0 ; + +if (IS_GEN9 (i915)) + err =gen9_check_dword_gap (guc_wopcm_base, guc_wopcm_size); +if (err) +return err; + +return 0 ; +} + +/** +* intel_wopcm_init() - Initialize the WOPCM structure. +* @wopcm: pointer to intel_wopcm. +* +* This function will partition WOPCM space based on GuC and HuC firmware sizes
+ * and will allocate max remaining for use by GuC. This function will also
+ * enforce platform dependent hardware restrictions on GuC WOPCM offset and
+ * size. It will fail the WOPCM init if any of these checks were failed, so that
+ * the following GuC firmware uploading would be aborted.
+ *
+ * Return: 0 on success, non-zero error code on failure.
+ */drivers/gpu/drm/i915/intel_wopcm.c new file +1
-0+int intel_wopcm_init (struct intel_wopcm *wopcm)
drivers/gpu/drm/i915/intel_wopcm.c line 141
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.c new file +10
-0+{ +struct drm_i915_private *i915 =wopcm_to_i915 (wopcm); +u32 guc_fw_size =intel_uc_fw_get_size (&i915->guc.fw); +u32 huc_fw_size =intel_uc_fw_get_size (&i915->huc.fw); +u32 ctx_rsvd =context_reserved_size (i915); +u32 guc_wopcm_base; +u32 guc_wopcm_size; +u32 guc_wopcm_rsvd; +int err; +
bikeshed: in case we want to be paranoic: GEM_BUG_ON(!wopcm->size)
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.c new file +10
-0+if (guc_fw_size >= wopcm->size) { +DRM_ERROR ("GuC FW (%uKiB) is too big to fit in WOPCM." , + guc_fw_size /1024 ); +return -E2BIG ; + } + +if (huc_fw_size >= wopcm->size) { +DRM_ERROR ("HuC FW (%uKiB) is too big to fit in WOPCM." , + huc_fw_size /1024 ); +return -E2BIG ;
drivers/gpu/drm/i915/intel_wopcm.c line 161
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.c new file +10
-0+ } + +/* Hardware requires GuC WOPCM base to be 16K aligned. */ + guc_wopcm_base =ALIGN (huc_fw_size +WOPCM_RESERVED_SIZE , +GUC_WOPCM_OFFSET_ALIGNMENT ); +if ((guc_wopcm_base + ctx_rsvd) >= wopcm->size) { +DRM_ERROR ("GuC WOPCM base(%uKiB) is too big.\n" , + guc_wopcm_base /1024 ); +return -E2BIG ; + }
hmm, all above checks are very unlikely, and are also covered by the next check below, so maybe we can drop them?
drivers/gpu/drm/i915/intel_wopcm.c line 172
Quoted 11 lines
drivers/gpu/drm/i915/intel_wopcm.c new file +11
-0+ + guc_wopcm_size = wopcm->size - guc_wopcm_base - ctx_rsvd; +/* +* GuC WOPCM size must be multiple of 4K pages. We've got the maximum +* WOPCM size available for GuC. Trim the size value to 4K boundary. +*/ + guc_wopcm_size &=GUC_WOPCM_SIZE_MASK ; + +DRM_DEBUG_DRIVER ("Calculated GuC WOPCM Region: [%uKiB, %uKiB)\n" , + guc_wopcm_base /1024 , guc_wopcm_size /1024 ); +
bikeshed: [n, m) notation suggests range n..m, so maybe better to use
DRM_DEBUG_DRIVER("Calculated GuC WOPCM: base %uKiB size %uKiB\n",
drivers/gpu/drm/i915/intel_wopcm.c line 181
Quoted 9 lines
drivers/gpu/drm/i915/intel_wopcm.c new file +9
-0+/* +* GuC WOPCM size needs to be big enough to include all GuC firmware, +* extra 8KiB stack for GuC firmware and GUC_WOPCM_RESERVED. +*/ + guc_wopcm_rsvd =GUC_WOPCM_RESERVED +GUC_WOPCM_STACK_RESERVED ; +if ((guc_fw_size + guc_wopcm_rsvd) > guc_wopcm_size) { +DRM_ERROR ("Need %uKiB WOPCM for GuC, %uKiB available.\n" , + (guc_fw_size + guc_wopcm_rsvd) /1024 , + guc_wopcm_size /1024 );
hmm, maybe to simplify calculations (and match them directly with diagram) we should introduce guc_wopcm_size_min:
guc_wopcm_size_min = GUC_WOPCM_RESERVED + GUC_WOPCM_STACK_RESERVED + guc_fw_size;
if (guc_wopcm_size_min > guc_wopcm_size) {
DRM_ERROR("Need %uKiB WOPCM for GuC, %uKiB available.\n",
guc_wopcm_size_min/1024, guc_wopcm_size/1024);Quoted 24 lines
drivers/gpu/drm/i915/intel_wopcm.c new file +14
-0+return -E2BIG ; + } + + err =check_hw_restriction (i915, guc_wopcm_base, guc_wopcm_size); +if (err) { +DRM_ERROR ("Failed to meet HW restriction.\n" ); +return err; + } + + wopcm->guc.base = guc_wopcm_base; + wopcm->guc.size = guc_wopcm_size; + +return 0 ; +}drivers/gpu/drm/i915/intel_wopcm.h new file +4
-0@@ -0,0 +1,34 @@ +/* +* SPDX-License-Identifier: MIT +* +* Copyright © 2017-2018 Intel Corporation
drivers/gpu/drm/i915/intel_wopcm.h line 14
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.h new file +10
-0+*/ + +#ifndef _INTEL_WOPCM_H_ +#define _INTEL_WOPCM_H_ + +#include <linux/types.h> + +/** +* struct intel_wopcm - overall WOPCM info and WOPCM regions. +* @size: size of overall WOPCM.
bikeshed: maybe better to place this doc would be inside struct to do not mix documentation style ?
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.h new file +10
-0+* @guc: GuC WOPCM Region info. +*/ +struct intel_wopcm { +u32 size; +struct { +/** +* @base: GuC WOPCM base which is offset from WOPCM base. +*/ +u32 base; +/**
drivers/gpu/drm/i915/intel_wopcm.h line 34
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.h new file +10
-0+* @size: size of the GuC WOPCM region. +*/ + u32 size; + } guc; +}; + +void intel_wopcm_init_early (struct intel_wopcm *wopcm); +int intel_wopcm_init (struct intel_wopcm *wopcm); + +#endif
only few bikesheds plus one suggestion, with that:
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v11 2/6] drm/i915: Implement dynamic GuC WOPCM offset and size calculation
Quoted 18 lines · Michal Wajdeczko
Quoted 15 lines · Jackie Li
+ if (
guc_fw_size>=wopcm->size) {
+DRM_ERROR("GuC FW (%uKiB) is too big to fit in WOPCM.", + guc_fw_size / 1024);
+ return-E2BIG;
+ }drivers/gpu/drm/i915/intel_wopcm.c new file +10
-0+ + if (huc_fw_size >= wopcm->size) { + DRM_ERROR("HuC FW (%uKiB) is too big to fit in WOPCM.", + huc_fw_size / 1024); + return -E2BIG; + } + + /* Hardware requires GuC WOPCM base to be 16K aligned. */ + guc_wopcm_base = ALIGN(huc_fw_size + WOPCM_RESERVED_SIZE, + GUC_WOPCM_OFFSET_ALIGNMENT);
Quoted 8 lines
Quoted 5 lines
+ if ((
guc_wopcm_base+ctx_rsvd) >=wopcm->size) { +DRM_ERROR("GuC WOPCM base(%uKiB) is too big.\n", + guc_wopcm_base / 1024);
+ return-E2BIG;
+ }hmm, all above checks are very unlikely, and are also covered by the next check below, so maybe we can drop them?
These checks make sure these values are in a known range. so that we don't need to worry about wrap around issues. e.g. guc_wopcm_size = wopcm->size - guc_wopcm_base - ctx_rsvd may wrap around if we don't have (guc_wopcm_base + ctx_rsvd) >= wopcm->size.
Quoted 17 lines
Quoted 10 lines
+
+guc_wopcm_size=wopcm->size-guc_wopcm_base-ctx_rsvd; + /*
+ * GuC WOPCM size must be multiple of 4K pages. We've got the maximum
+ * WOPCM size available for GuC. Trim the size value to 4K boundary.
+ */
+guc_wopcm_size&=GUC_WOPCM_SIZE_MASK;drivers/gpu/drm/i915/intel_wopcm.c line 172
Quoted 4 lines
drivers/gpu/drm/i915/intel_wopcm.c new file +4
-0+ + DRM_DEBUG_DRIVER("Calculated GuC WOPCM Region: [%uKiB, %uKiB)\n", + guc_wopcm_base / 1024, guc_wopcm_size / 1024); +bikeshed: [n, m) notation suggests range n..m, so maybe better to use
Quoted 1 line
DRM_DEBUG_DRIVER("Calculated GuC WOPCM: base %uKiB size %uKiB\n",
I'd like to keep it as [n, m) to suggest it's a region and to align with other comments in the code.
Quoted 12 lines
Quoted 11 lines
+ /*
+ * GuC WOPCM size needs to be big enough to include all GuC firmware,
+ * extra 8KiB stack for GuC firmware andGUC_WOPCM_RESERVED. + */
+guc_wopcm_rsvd=GUC_WOPCM_RESERVED+GUC_WOPCM_STACK_RESERVED; + if ((guc_fw_size+guc_wopcm_rsvd) >guc_wopcm_size) { + DRM_ERROR("Need %uKiB WOPCM for GuC, %uKiB available.\n", + (guc_fw_size+guc_wopcm_rsvd) / 1024,
+guc_wopcm_size/ 1024);
Quoted 8 lines
hmm, maybe to simplify calculations (and match them directly with diagram) we should introduce
guc_wopcm_size_min:
guc_wopcm_size_min=GUC_WOPCM_RESERVED+GUC_WOPCM_STACK_RESERVED+guc_fw_size; if (guc_wopcm_size_min>guc_wopcm_size) {
DRM_ERROR("Need %uKiB WOPCM for GuC, %uKiB available.\n", guc_wopcm_size_min/1024, guc_wopcm_size/1024);
As we discussed, we need find the maximum size value to meet the HW requirement. So maybe I need pass this comment as well.:-)
Quoted 29 lines
Quoted 29 lines
+ return
-E2BIG;
+ }drivers/gpu/drm/i915/intel_wopcm.c new file +12
-0+ + err = check_hw_restriction(i915, guc_wopcm_base, guc_wopcm_size); + if (err) { + DRM_ERROR("Failed to meet HW restriction.\n"); + return err; + } + + wopcm->guc.base = guc_wopcm_base; + wopcm->guc.size = guc_wopcm_size; + + return 0; +}drivers/gpu/drm/i915/intel_wopcm.h new file +9
-0@@ -0,0 +1,34 @@ +/* +* SPDX-License-Identifier: MIT +* +* Copyright © 2017-2018 Intel Corporation +*/ + +#ifndef _INTEL_WOPCM_H_ +#define _INTEL_WOPCM_H_ +
Quoted 8 lines
drivers/gpu/drm/i915/intel_wopcm.h line 14
Quoted 5 lines
drivers/gpu/drm/i915/intel_wopcm.h new file +5
-0+#include <linux/types.h> + +/** +* struct intel_wopcm - overall WOPCM info and WOPCM regions. +* @size: size of overall WOPCM. bikeshed: maybe better to place this doc would be inside struct to do not mix documentation style ?
Prefer to keep as it is now:-)
Quoted 24 lines
Quoted 11 lines
drivers/gpu/drm/i915/intel_wopcm.h new file +10
-0+* @guc: GuC WOPCM Region info. +*/ +struct intel_wopcm { + u32 size; + struct { + /** + * @base: GuC WOPCM base which is offset from WOPCM base. + */ + u32 base; + /**drivers/gpu/drm/i915/intel_wopcm.h line 34
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.h new file +10
-0+* @size: size of the GuC WOPCM region. +*/ + u32 size; + } guc; +}; + +void intel_wopcm_init_early (struct intel_wopcm *wopcm); +int intel_wopcm_init (struct intel_wopcm *wopcm); + +#endif only few bikesheds plus one suggestion, with that:
Quoted 1 line
Reviewed-by Michal Wajdeczko <[email protected]>
Thanks for the review.
-Jackie
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v11 3/6 drm/i915: Add support to return CNL specific reserved WOPCM size
In reply to Jackie LiCNL has its specific reserved GuC WOPCM size for RC6 and other hardware contexts.
This patch updates the code to return CNL specific reserved GuC WOPCM size for RC6 and other hardware contexts so that the GuC WOPCM size can be calculated correctly for CNL.
v9:
- Created a new patch for these changes originally made in v8 4/6 patch of this series (Sagar/Michal)
v10:
- Used if-else ladder to the returning of context sizes (Joonas)
v11:
- Removed GUC_ prefix from context size macro (Michal)
Bspec: 12690
--- drivers/gpu/drm/i915/intel_wopcm.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/intel_wopcm.c +4 -0
@@ -54,6 +54,8 @@/* 24KB at the end of WOPCM is reserved for RC6 CTX on BXT. */ #define BXT_WOPCM_RC6_CTX_RESERVED (24 * 1024) +/* 36KB WOPCM reserved at the end of WOPCM on CNL. */ +#define CNL_WOPCM_HW_CTX_RESERVED (36 * 1024)/* 128KB from GUC_WOPCM_RESERVED is reserved for FW on Gen9. */ #define GEN9_GUC_FW_RESERVED (128 * 1024)
@@ -78,6 +80,8 @@ static inline u32 context_reserved_size(struct drm_i915_private *i915) {if (IS_GEN9_LP (i915))return BXT_WOPCM_RC6_CTX_RESERVED ; +else if (INTEL_GEN (i915) >=10 ) +return CNL_WOPCM_HW_CTX_RESERVED ;else return 0 ; }
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v11 3/6] drm/i915: Add support to return CNL specific reserved WOPCM size
Quoted 20 lines · Jackie Li
CNL has its specific reserved GuC WOPCM size for RC6 and other hardware contexts.
This patch updates the code to return CNL specific reserved GuC WOPCM size for RC6 and other hardware contexts so that the GuC WOPCM size can be calculated correctly for CNL.
v9:
- Created a new patch for these changes originally made in v8 4/6 patch
of
this series (Sagar/Michal)v10:
- Used if-else ladder to the returning of context sizes (Joonas)v11:
- RemovedGUC_prefix from context size macro (Michal)Bspec: 12690
Quoted 7 lines
Cc Sagar Arun Kamble <[email protected]>Cc Michal Wajdeczko <[email protected]>Cc Chris Wilson <[email protected]>Cc Joonas Lahtinen <[email protected]>Reviewed-by Joonas Lahtinen <[email protected]> (v9)Signed-off-by Jackie Li <[email protected]>---
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v11 4/6 drm/i915: Add HuC firmware size related restriction for Gen9 and CNL A0
In reply to Jackie LiOn CNL A0 and Gen9, there's a hardware restriction that requires the available GuC WOPCM size to be larger than or equal to HuC firmware size.
This patch adds new verification code to ensure the available GuC WOPCM size to be larger than or equal to HuC firmware size on both Gen9 and CNL A0.
v6:
- Extended HuC FW size check against GuC WOPCM size to all Gen9 and CNL A0 platforms
v7:
- Fixed patch format issues
v8:
- Renamed variables and functions to avoid ambiguity (Joonas)
- Updated commit message and comments to be more comprehensive (Sagar)
v9:
- Moved code that is not related to restriction check into a separate patch and updated the commit message accordingly (Sagar/Michal)
- Avoided to call uc_get_fw_size for better layer isolation (Michal)
v10:
- Shorten function names and reorganized size_check code to have clear isolation (Joonas)
- Removed unnecessary comments (Joonas)
v11:
- Fixed logic error in size check (Michal)
BSpec: 10875
--- drivers/gpu/drm/i915/intel_wopcm.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-)
drivers/gpu/drm/i915/intel_wopcm.c +25 -3
@@ -107,8 +107,26 @@ static inline int gen9_check_dword_gap(u32 guc_wopcm_base, u32 guc_wopcm_size)return 0 ; } +static inline int gen9_check_huc_fw_fits (u32 guc_wopcm_size,u32 huc_fw_size) +{ +/* +* On Gen9 & CNL A0, hardware requires the total available GuC WOPCM +* size to be larger than or equal to HuC firmware size. Otherwise, +* firmware uploading would fail. +*/ +if (huc_fw_size > guc_wopcm_size -GUC_WOPCM_RESERVED ) { +DRM_ERROR ("HuC fw(%uKiB) won't fit in GuC WOPCM(%uKiB).\n" , + huc_fw_size /1024 , + (guc_wopcm_size -GUC_WOPCM_RESERVED ) /1024 ); +return -E2BIG ; + } + +return 0 ; +} +static inline int check_hw_restriction (struct drm_i915_private *i915, -u32 guc_wopcm_base,u32 guc_wopcm_size) +u32 guc_wopcm_base,u32 guc_wopcm_size, +u32 huc_fw_size) {int err =0 ;
@@ -117,7 +135,10 @@ static inline int check_hw_restriction(struct drm_i915_private *i915,if (err)return err; -return 0 ; +if (IS_GEN9 (i915) ||IS_CNL_REVID (i915,CNL_REVID_A0 ,CNL_REVID_A0 )) + err =gen9_check_huc_fw_fits (guc_wopcm_size, huc_fw_size); + +return err; }/**
@@ -186,7 +207,8 @@ int intel_wopcm_init(struct intel_wopcm *wopcm)return -E2BIG ; } - err =check_hw_restriction (i915, guc_wopcm_base, guc_wopcm_size); + err =check_hw_restriction (i915, guc_wopcm_base, guc_wopcm_size, + huc_fw_size);if (err) {DRM_ERROR ("Failed to meet HW restriction.\n" );return err;
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v11 4/6] drm/i915: Add HuC firmware size related restriction for Gen9 and CNL A0
Quoted 55 lines · Jackie Li
On CNL A0 and Gen9, there's a hardware restriction that requires the available GuC WOPCM size to be larger than or equal to HuC firmware size.
This patch adds new verification code to ensure the available GuC WOPCM size to be larger than or equal to HuC firmware size on both Gen9 and CNL A0.
v6:
- Extended HuC FW size check against GuC WOPCM size to all Gen9 and CNL A0 platformsv7:
- Fixed patch format issuesv8:
- Renamed variables and functions to avoid ambiguity (Joonas)
- Updated commit message and comments to be more comprehensive (Sagar)v9:
- Moved code that is not related to restriction check into a separate patch and updated the commit message accordingly (Sagar/Michal)
- Avoided to calluc_get_fw_sizefor better layer isolation (Michal)v10:
- Shorten function names and reorganizedsize_checkcode to have clear isolation (Joonas)
- Removed unnecessary comments (Joonas)v11:
- Fixed logic error in size check (Michal)BSpec: 10875
Cc Michal Wajdeczko <[email protected]>Cc Sagar Arun Kamble <[email protected]>Cc John Spotswood <[email protected]>Cc Jeff McGee <[email protected]>Cc Chris Wilson <[email protected]>Cc Joonas Lahtinen <[email protected]>Reviewed-by Sagar Arun Kamble <[email protected]> (v8)Signed-off-by Jackie Li <[email protected]>--- drivers/gpu/drm/i915/intel_wopcm.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/intel_wopcm.c +1
-0@@ -107,8 +107,26 @@ static inline int gen9_check_dword_gap(u32 guc_wopcm_base, u32 guc_wopcm_size)return 0 ; } +static inline int gen9_check_huc_fw_fits (u32 guc_wopcm_size,u32 huc_fw_size)
drivers/gpu/drm/i915/intel_wopcm.c static inline int gen9_check_dword_gap(u32 · line 121
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.c +10
-0+{ +/* +* On Gen9 & CNL A0, hardware requires the total available GuC WOPCM +* size to be larger than or equal to HuC firmware size. Otherwise, +* firmware uploading would fail. +*/ +if (huc_fw_size > guc_wopcm_size -GUC_WOPCM_RESERVED ) { +DRM_ERROR ("HuC fw(%uKiB) won't fit in GuC WOPCM(%uKiB).\n" , + huc_fw_size /1024 , + (guc_wopcm_size -GUC_WOPCM_RESERVED ) /1024 );
bikeshed: in earlier patches in similar error messages, you used "HuC FW (%KiB)" and didn't provide available space. Maybe simplest way to unify and minimize the code is to add one "failed" tag in wopcm_init function where you can print all values used for partitioning:
failed:
DRM_ERROR("Failed to partition %uKiB WOPCM (%d)\n", wopcm->size/1024,
err);
DRM_ERROR("HuC FW size=%uKiB\n", ...);
DRM_ERROR("GuC FW size=%uKiB\n", ...);
return err;Quoted 24 lines
drivers/gpu/drm/i915/intel_wopcm.c +12
-2+return -E2BIG ; + } + +return 0 ; +} +static inline int check_hw_restriction (struct drm_i915_private *i915, -u32 guc_wopcm_base,u32 guc_wopcm_size) +u32 guc_wopcm_base,u32 guc_wopcm_size, +u32 huc_fw_size) {int err =0 ;@@ -117,7 +135,10 @@ static inline int check_hw_restriction(struct drm_i915_private *i915, if (err) return err; -return 0 ; +if (IS_GEN9 (i915) ||IS_CNL_REVID (i915,CNL_REVID_A0 ,CNL_REVID_A0 )) + err =gen9_check_huc_fw_fits (guc_wopcm_size, huc_fw_size); + +return err; }/**
drivers/gpu/drm/i915/intel_wopcm.c int intel_wopcm_init(struct intel_wopcm *wopcm) · line 213
Quoted 8 lines
drivers/gpu/drm/i915/intel_wopcm.c +2
-1@@ -186,7 +207,8 @@ int intel_wopcm_init(struct intel_wopcm *wopcm)return -E2BIG ; } - err =check_hw_restriction (i915, guc_wopcm_base, guc_wopcm_size); + err =check_hw_restriction (i915, guc_wopcm_base, guc_wopcm_size, + huc_fw_size);if (err) {DRM_ERROR ("Failed to meet HW restriction.\n" );return err;
but bikeshed is not critical, so
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v11 4/6] drm/i915: Add HuC firmware size related restriction for Gen9 and CNL A0
Quoted 74 lines · Michal Wajdeczko
Quoted 58 lines · Jackie Li
On CNL A0 and Gen9, there's a hardware restriction that requires the available GuC WOPCM size to be larger than or equal to HuC firmware size.
This patch adds new verification code to ensure the available GuC WOPCM size to be larger than or equal to HuC firmware size on both Gen9 and CNL A0.
v6:
- Extended HuC FW size check against GuC WOPCM size to all Gen9 and CNL A0 platformsv7:
- Fixed patch format issuesv8:
- Renamed variables and functions to avoid ambiguity (Joonas)
- Updated commit message and comments to be more comprehensive (Sagar)v9:
- Moved code that is not related to restriction check into a separate patch and updated the commit message accordingly (Sagar/Michal)
- Avoided to calluc_get_fw_sizefor better layer isolation (Michal)v10:
- Shorten function names and reorganizedsize_checkcode to have clear isolation (Joonas)
- Removed unnecessary comments (Joonas)v11:
- Fixed logic error in size check (Michal)BSpec: 10875
Cc Michal Wajdeczko <[email protected]>Cc Sagar Arun Kamble <[email protected]>Cc John Spotswood <[email protected]>Cc Jeff McGee <[email protected]>Cc Chris Wilson <[email protected]>Cc Joonas Lahtinen <[email protected]>Reviewed-by Sagar Arun Kamble <[email protected]> (v8)Signed-off-by Jackie Li <[email protected]>---
drivers/gpu/drm/i915/intel_wopcm.c | 28 +++++++++++++++++++++++++---1 file changed, 25 insertions(+), 3 deletions(-)drivers/gpu/drm/i915/intel_wopcm.c +4
-0@@ -107,8 +107,26 @@ static inline int gen9_check_dword_gap(u32 guc_wopcm_base, u32 guc_wopcm_size) return 0; } +static inline int gen9_check_huc_fw_fits (u32 guc_wopcm_size,u32 huc_fw_size) +{ + /* +* On Gen9 & CNL A0, hardware requires the total available GuC Quoted 8 lines
WOPCM
+ * size to be larger than or equal to HuC firmware size. Otherwise, + * firmware uploading would fail.
+ */
+ if (huc_fw_size>guc_wopcm_size-GUC_WOPCM_RESERVED) { + DRM_ERROR("HuC fw(%uKiB) won't fit in GuC WOPCM(%uKiB).\n", +huc_fw_size/ 1024,
+ (guc_wopcm_size-GUC_WOPCM_RESERVED) / 1024);bikeshed: in earlier patches in similar error messages, you used "HuC FW (%KiB)" and didn't provide available space. Maybe simplest way to unify and minimize the code is to add one "failed" tag in
wopcm_initfunction where you can print all values used for partitioning:
Quoted 6 lines
failed:
DRM_ERROR("Failed to partition %uKiB WOPCM (%d)\n", wopcm->size/1024, err);DRM_ERROR("HuC FW size=%uKiB\n", ...);
DRM_ERROR("GuC FW size=%uKiB\n", ...);
return err;
I will keep it as it is now to save some time since I was told to keep these message at the point where the error happened.:-)
Quoted 36 lines
Quoted 25 lines
+ return
-E2BIG;
+ }drivers/gpu/drm/i915/intel_wopcm.c +4
-0+ + return 0; +} +static inline int check_hw_restriction(struct
drm_i915_private*i915, - u32guc_wopcm_base, u32guc_wopcm_size) + u32guc_wopcm_base, u32guc_wopcm_size, + u32huc_fw_size)
{
int err = 0;drivers/gpu/drm/i915/intel_wopcm.c +4
-1@@ -117,7 +135,10 @@ static inline int check_hw_restriction(structdrm_i915_private *i915, if (err) return err; - return 0; + if (IS_GEN9(i915) || IS_CNL_REVID(i915, CNL_REVID_A0,CNL_REVID_A0 )) + err = gen9_check_huc_fw_fits(guc_wopcm_size, huc_fw_size); + + return err; }/** drivers/gpu/drm/i915/intel_wopcm.c int intel_wopcm_init(struct intel_wopcm *wopcm) · line 213
Quoted 8 lines
drivers/gpu/drm/i915/intel_wopcm.c +2
-1@@ -186,7 +207,8 @@ int intel_wopcm_init(struct intel_wopcm *wopcm) return -E2BIG; } - err = check_hw_restriction(i915, guc_wopcm_base, guc_wopcm_size); + err = check_hw_restriction(i915, guc_wopcm_base, guc_wopcm_size, + huc_fw_size); if (err) { DRM_ERROR("Failed to meet HW restriction.\n"); return err;but bikeshed is not critical, so
Quoted 1 line
Reviewed-by Michal Wajdeczko <[email protected]>
Thanks,
-Jackie
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v11 5/6 drm/i915/guc: Check the locking status of GuC WOPCM registers
In reply to Jackie LiGuC WOPCM registers are write-once registers. Current driver code accesses these registers without checking the accessibility to these registers which will lead to unpredictable driver behaviors if these registers were touch by other components (such as faulty BIOS code).
This patch moves the GuC WOPCM registers updating code into intel_guc_wopcm.c and adds check before and after the update to GuC WOPCM registers so that we can make sure the driver is in a known state before and after writing to these write-once registers.
v6:
- Made sure module reloading won't bug the kernel while doing locking status checking
v7:
- Fixed patch format issues
v8:
- Fixed coding style issue on register lock bit macro definition (Sagar)
v9:
- Avoided to use redundant !! to cast uint to bool (Chris)
- Return error code instead of GEM_BUG_ON for locked with invalid register values case (Sagar)
- Updated guc_wopcm_hw_init to use guc_wopcm as first parameter (Michal)
- Added code to set and validate the HuC_LOADING_AGENT_GUC bit in GuC WOPCM offset register based on the presence of HuC firmware (Michal)
- Use bit fields instead of macros for GuC WOPCM flags (Michal)
v10:
- Refined variable names, removed redundant comments (Joonas)
- Introduced lockable_reg to handle the write once register write and propagate the write error to caller (Joonas)
- Used lockable_reg abstraction to avoid locking bit check on generic i915_reg_t (Michal)
- Added log message for error paths (Michal)
- Removed hw_updated flag and only relies on real hardware status
v11:
- Replaced lockable_reg with simplified function (Michal)
- Used new macros for locking bits of WOPCM size/offset registers instead of using BIT(0) directly (Michal)
- use intel_wopcm_init_hw() called from intel_gem_init_hw() to do GuC WOPCM register setup instead of calling from intel_uc_init_hw() (Michal)
BSpec: 10875, 10833
--- drivers/gpu/drm/i915/i915_gem.c | 6 ++++ drivers/gpu/drm/i915/intel_guc_reg.h | 3 ++ drivers/gpu/drm/i915/intel_uc.c | 5 --- drivers/gpu/drm/i915/intel_wopcm.c | 63 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_wopcm.h | 1 + 5 files changed, 73 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_gem.c +6 -0
@@ -5122,6 +5122,12 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv) goto out; } + ret =intel_wopcm_init_hw (&dev_priv->wopcm); +if (ret) { +DRM_ERROR ("Enabling WOPCM failed (%d)\n" , ret); + goto out; + } +/* We can't enable contexts until all firmware is loaded */ ret =intel_uc_init_hw (dev_priv);if (ret) {
drivers/gpu/drm/i915/intel_guc_reg.h +3 -0
@@ -66,15 +66,18 @@#define UOS_MOVE (1<<4)#define START_DMA (1<<0)#define DMA_GUC_WOPCM_OFFSET _MMIO(0xc340) +#define GUC_WOPCM_OFFSET_VALID (1<<0)#define HUC_LOADING_AGENT_VCR (0<<1)#define HUC_LOADING_AGENT_GUC (1<<1)#define GUC_WOPCM_OFFSET_SHIFT 14 +#define GUC_WOPCM_OFFSET_MASK (0x3ffff << GUC_WOPCM_OFFSET_SHIFT)#define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)#define HUC_STATUS2 _MMIO(0xD3B0)#define HUC_FW_VERIFIED (1<<7)#define GUC_WOPCM_SIZE _MMIO(0xc050) +#define GUC_WOPCM_SIZE_LOCKED (1<<0)#define GUC_WOPCM_SIZE_SHIFT 12#define GUC_WOPCM_SIZE_MASK (0xfffff << GUC_WOPCM_SIZE_SHIFT)
drivers/gpu/drm/i915/intel_uc.c +0 -5
@@ -341,11 +341,6 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)guc_disable_communication (guc);gen9_reset_guc_interrupts (dev_priv); -/* init WOPCM */ -I915_WRITE (GUC_WOPCM_SIZE , dev_priv->wopcm.guc.size); -I915_WRITE (DMA_GUC_WOPCM_OFFSET , - dev_priv->wopcm.guc.base |HUC_LOADING_AGENT_GUC ); -/* WaEnableuKernelHeaderValidFix:skl */ /* WaEnableGuCBootHashCheckNotSet:skl,bxt,kbl */ if (IS_GEN9 (dev_priv))
drivers/gpu/drm/i915/intel_wopcm.c +63 -0
66 lines not on this page · raw message
drivers/gpu/drm/i915/intel_wopcm.h +1 -0
@@ -30,5 +30,6 @@ struct intel_wopcm {void intel_wopcm_init_early (struct intel_wopcm *wopcm);int intel_wopcm_init (struct intel_wopcm *wopcm); +int intel_wopcm_init_hw (struct intel_wopcm *wopcm);#endif
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v11 5/6] drm/i915/guc: Check the locking status of GuC WOPCM registers
Quoting Jackie Li (2018-03-01 01:01:39)
Quoted 45 lines
GuC WOPCM registers are write-once registers. Current driver code accesses these registers without checking the accessibility to these registers which will lead to unpredictable driver behaviors if these registers were touch by other components (such as faulty BIOS code).
This patch moves the GuC WOPCM registers updating code into
intel_guc_wopcm.cand adds check before and after the update to GuC WOPCM registers so that we can make sure the driver is in a known state before and after writing to these write-once registers.v6:
- Made sure module reloading won't bug the kernel while doing locking status checkingv7:
- Fixed patch format issuesv8:
- Fixed coding style issue on register lock bit macro definition (Sagar)v9:
- Avoided to use redundant !! to cast uint to bool (Chris)
- Return error code instead ofGEM_BUG_ONfor locked with invalid register values case (Sagar)
- Updatedguc_wopcm_hw_initto useguc_wopcmas first parameter (Michal)
- Added code to set and validate theHuC_LOADING_AGENT_GUCbit in GuC WOPCM offset register based on the presence of HuC firmware (Michal)
- Use bit fields instead of macros for GuC WOPCM flags (Michal)v10:
- Refined variable names, removed redundant comments (Joonas)
- Introducedlockable_regto handle the write once register write and propagate the write error to caller (Joonas)
- Usedlockable_regabstraction to avoid locking bit check on generici915_reg_t(Michal)
- Added log message for error paths (Michal)
- Removedhw_updatedflag and only relies on real hardware statusv11:
- Replacedlockable_regwith simplified function (Michal)
- Used new macros for locking bits of WOPCM size/offset registers instead of using BIT(0) directly (Michal)
- useintel_wopcm_init_hw()called fromintel_gem_init_hw()to do GuC WOPCM register setup instead of calling fromintel_uc_init_hw()(Michal)
Quoted 5 lines
BSpec: 10875, 10833
Cc Michal Wajdeczko <[email protected]>Cc Chris Wilson <[email protected]>Cc Joonas Lahtinen <[email protected]>
Michal, your turn! Joonas, Sagar and myself did the first 3, so the fourth must be yours for the royal flush ;)
-Chris
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v11 5/6] drm/i915/guc: Check the locking status of GuC WOPCM registers
In reply to Jackie LiQuoted 7 lines · Jackie Li
GuC WOPCM registers are write-once registers. Current driver code accesses these registers without checking the accessibility to these registers which will lead to unpredictable driver behaviors if these registers were touch by other components (such as faulty BIOS code).
This patch moves the GuC WOPCM registers updating code into
intel_guc_wopcm.cand adds check before and after the update to GuC WOPCM
s/intel_guc_wopcm/intel_wopcm
s/before and after/after
Quoted 137 lines
registers so that we can make sure the driver is in a known state before and after writing to these write-once registers.
v6:
- Made sure module reloading won't bug the kernel while doing locking status checkingv7:
- Fixed patch format issuesv8:
- Fixed coding style issue on register lock bit macro definition (Sagar)v9:
- Avoided to use redundant !! to cast uint to bool (Chris)
- Return error code instead ofGEM_BUG_ONfor locked with invalid
register
values case (Sagar)
- Updatedguc_wopcm_hw_initto useguc_wopcmas first parameter (Michal)
- Added code to set and validate theHuC_LOADING_AGENT_GUCbit in GuC WOPCM offset register based on the presence of HuC firmware (Michal)
- Use bit fields instead of macros for GuC WOPCM flags (Michal)v10:
- Refined variable names, removed redundant comments (Joonas)
- Introducedlockable_regto handle the write once register write and propagate the write error to caller (Joonas)
- Usedlockable_regabstraction to avoid locking bit check on generici915_reg_t(Michal)
- Added log message for error paths (Michal)
- Removedhw_updatedflag and only relies on real hardware statusv11:
- Replacedlockable_regwith simplified function (Michal)
- Used new macros for locking bits of WOPCM size/offset registers
instead
of using BIT(0) directly (Michal)
- useintel_wopcm_init_hw()called fromintel_gem_init_hw()to do GuC WOPCM register setup instead of calling fromintel_uc_init_hw()
(Michal)BSpec: 10875, 10833
Cc Michal Wajdeczko <[email protected]>Cc Chris Wilson <[email protected]>Cc Joonas Lahtinen <[email protected]>Signed-off-by Jackie Li <[email protected]>--- drivers/gpu/drm/i915/i915_gem.c | 6 ++++ drivers/gpu/drm/i915/intel_guc_reg.h | 3 ++ drivers/gpu/drm/i915/intel_uc.c | 5 --- drivers/gpu/drm/i915/intel_wopcm.c | 63 ++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_wopcm.h | 1 + 5 files changed, 73 insertions(+), 5 deletions(-)drivers/gpu/drm/i915/i915_gem.c +6
-0@@ -5122,6 +5122,12 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv) goto out; } + ret =intel_wopcm_init_hw (&dev_priv->wopcm); +if (ret) { +DRM_ERROR ("Enabling WOPCM failed (%d)\n" , ret); + goto out; + } +/* We can't enable contexts until all firmware is loaded */ ret =intel_uc_init_hw (dev_priv);if (ret) {drivers/gpu/drm/i915/intel_guc_reg.h +3
-0@@ -66,15 +66,18 @@#define UOS_MOVE (1<<4)#define START_DMA (1<<0)#define DMA_GUC_WOPCM_OFFSET _MMIO(0xc340) +#define GUC_WOPCM_OFFSET_VALID (1<<0)#define HUC_LOADING_AGENT_VCR (0<<1)#define HUC_LOADING_AGENT_GUC (1<<1)#define GUC_WOPCM_OFFSET_SHIFT 14 +#define GUC_WOPCM_OFFSET_MASK (0x3ffff << GUC_WOPCM_OFFSET_SHIFT)#define GUC_MAX_IDLE_COUNT _MMIO(0xC3E4)#define HUC_STATUS2 _MMIO(0xD3B0)#define HUC_FW_VERIFIED (1<<7)#define GUC_WOPCM_SIZE _MMIO(0xc050) +#define GUC_WOPCM_SIZE_LOCKED (1<<0)#define GUC_WOPCM_SIZE_SHIFT 12#define GUC_WOPCM_SIZE_MASK (0xfffff << GUC_WOPCM_SIZE_SHIFT)drivers/gpu/drm/i915/intel_uc.c +0
-5@@ -341,11 +341,6 @@ int intel_uc_init_hw(struct drm_i915_private *dev_priv)guc_disable_communication (guc);gen9_reset_guc_interrupts (dev_priv); -/* init WOPCM */ -I915_WRITE (GUC_WOPCM_SIZE , dev_priv->wopcm.guc.size); -I915_WRITE (DMA_GUC_WOPCM_OFFSET , - dev_priv->wopcm.guc.base |HUC_LOADING_AGENT_GUC ); -/* WaEnableuKernelHeaderValidFix:skl */ /* WaEnableGuCBootHashCheckNotSet:skl,bxt,kbl */ if (IS_GEN9 (dev_priv))drivers/gpu/drm/i915/intel_wopcm.c +21
-0@@ -219,3 +219,66 @@ int intel_wopcm_init(struct intel_wopcm *wopcm)return 0 ; } + +static inline int write_and_verify (struct drm_i915_private *dev_priv, +i915_reg_t reg,u32 val,u32 mask, +u32 locked_bit) +{ +u32 reg_val; + +GEM_BUG_ON (val & ~mask); + +I915_WRITE (reg, val); + + reg_val =I915_READ (reg); + +return (reg_val & mask) != (val | locked_bit) ? -EIO :0 ; +} + +/** +* intel_wopcm_init_hw() - Setup GuC WOPCM registers. +* @wopcm: pointer to intel_wopcm. +* +* Setup the GuC WOPCM size and offset registers with the stored
Quoted 4 lines
values. It will
+ * also check the registers locking status to determine whether these registers
+ * are unlocked and can be updated.
This comment is not fully valid any more, as we only verify *after* write.
Quoted 5 lines
+ *
+ * Return: 0 on success.-EIOif registers were locked with incorrect values.
+ */drivers/gpu/drm/i915/intel_wopcm.c +1
-0+int intel_wopcm_init_hw (struct intel_wopcm *wopcm)
drivers/gpu/drm/i915/intel_wopcm.c int intel_wopcm_init(struct intel_wopcm *wopcm) · line 258
Quoted 10 lines
drivers/gpu/drm/i915/intel_wopcm.c +10
-0+{ +struct drm_i915_private *dev_priv =wopcm_to_i915 (wopcm); +u32 huc_agent; +u32 mask; +int err; + +if (!USES_GUC (dev_priv)) +return 0 ; + +GEM_BUG_ON (!HAS_GUC (dev_priv));
bikeshed: being paranoic
GEM_BUG_ON(!wopcm->guc.base); GEM_BUG_ON(!wopcm->guc.size);
drivers/gpu/drm/i915/intel_wopcm.c int intel_wopcm_init(struct intel_wopcm *wopcm) · line 261
Quoted 3 lines
drivers/gpu/drm/i915/intel_wopcm.c +3
-0+ + err = write_and_verify(dev_priv, GUC_WOPCM_SIZE, + dev_priv->wopcm.guc.size,
you should use wopcm-> instead dev_priv->wopcm. (same below)
drivers/gpu/drm/i915/intel_wopcm.c int intel_wopcm_init(struct intel_wopcm *wopcm) · line 263
Quoted 2 lines
drivers/gpu/drm/i915/intel_wopcm.c +2
-0+GUC_WOPCM_SIZE_MASK |GUC_WOPCM_SIZE_LOCKED , + GUC_WOPCM_SIZE_LOCKED);
bikeshed: we should set BASE first, then SIZE ;)
drivers/gpu/drm/i915/intel_wopcm.c int intel_wopcm_init(struct intel_wopcm *wopcm) · line 271
Quoted 8 lines
drivers/gpu/drm/i915/intel_wopcm.c +8
-0+if (err) + goto err_out; + + huc_agent =USES_HUC (dev_priv) ?HUC_LOADING_AGENT_GUC :0 ; + mask =GUC_WOPCM_OFFSET_MASK |GUC_WOPCM_OFFSET_VALID | huc_agent; + err =write_and_verify (dev_priv,DMA_GUC_WOPCM_OFFSET , + dev_priv->wopcm.guc.base | huc_agent, mask, +GUC_WOPCM_OFFSET_VALID );
as the only supported HuC scenario for us is always with HUC_LOADING_AGENT_GUC, maybe we should always set this bit, but only add to mask for check conditionally? otherwise we couldn't run first without and later with HuC... just asking
Quoted 18 lines
drivers/gpu/drm/i915/intel_wopcm.c +13
-0+if (err) + goto err_out; + +return 0 ; + +err_out: +DRM_ERROR ("Failed to init WOPCM registers:\n" ); +DRM_ERROR ("DMA_GUC_WOPCM_OFFSET=%#x\n" , +I915_READ (DMA_GUC_WOPCM_OFFSET )); +DRM_ERROR ("GUC_WOPCM_SIZE=%#x\n" ,I915_READ (GUC_WOPCM_SIZE )); + +return err; +}drivers/gpu/drm/i915/intel_wopcm.h +0
-0
drivers/gpu/drm/i915/intel_wopcm.h struct intel_wopcm { · line 33
Quoted 4 lines
drivers/gpu/drm/i915/intel_wopcm.h +1
-0@@ -30,5 +30,6 @@ struct intel_wopcm {void intel_wopcm_init_early (struct intel_wopcm *wopcm);int intel_wopcm_init (struct intel_wopcm *wopcm); +int intel_wopcm_init_hw (struct intel_wopcm *wopcm);#endif
with function description and use wopcm pointer fixed,
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v11 5/6] drm/i915/guc: Check the locking status of GuC WOPCM registers
Quoted 7 lines · Michal Wajdeczko
Quoted 3 lines · Jackie Li
+
+ err = write_and_verify(dev_priv,GUC_WOPCM_SIZE, +dev_priv->wopcm.guc.size,
Quoted 6 lines
you should use wopcm-> instead
dev_priv->wopcm. (same below)Quoted 2 lines
+
GUC_WOPCM_SIZE_MASK|GUC_WOPCM_SIZE_LOCKED, +GUC_WOPCM_SIZE_LOCKED);bikeshed: we should set BASE first, then SIZE ;)
I'd like to keep the sequence it as how the existing code is doing this. Plus It is only called once during init, and now it works perfectly.:-)
Quoted 10 lines
Quoted 9 lines
+ if (err)
+ gotoerr_out;
+
+huc_agent=USES_HUC(dev_priv)?HUC_LOADING_AGENT_GUC: 0; + mask =GUC_WOPCM_OFFSET_MASK|GUC_WOPCM_OFFSET_VALID|huc_agent; + err = write_and_verify(dev_priv,DMA_GUC_WOPCM_OFFSET, +dev_priv->wopcm.guc.base|huc_agent, mask, +GUC_WOPCM_OFFSET_VALID);
Quoted 5 lines
as the only supported HuC scenario for us is always with
HUC_LOADING_AGENT_GUC, maybe we should always set this bit, but only add to mask for check conditionally? otherwise we couldn't run first without and later with HuC... just asking
I assume what you are asking is how to deal with the use case that we first run without HuC firmware, then we unload the driver module and come back with a HuC FW?
In this case, we need to also recalculate the GuC region and we need also the reg values accordingly. Unfortunately, we cannot do it now once the regs were locked.
Quoted 4 lines
with function description and use wopcm pointer fixed,
Reviewed-by Michal Wajdeczko <[email protected]>
Thanks again for the review.:-)
-Jackie
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v11 6/6 HAX Enable GuC Submission for CI
In reply to Jackie Li--- drivers/gpu/drm/i915/i915_params.c | 2 +- drivers/gpu/drm/i915/i915_params.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_params.c +1 -1
@@ -152,7 +152,7 @@ i915_param_named_unsafe(edp_vswing, int, 0400,i915_param_named_unsafe (enable_guc, int,0400 ,"Enable GuC load for GuC submission and/or HuC load. " "Required functionality can be selected using bitmask values. " -"(-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load)" ); +"(-1=auto [default], 0=disable, 1=GuC submission, 2=HuC load)" );i915_param_named (guc_log_level, int,0400 , "GuC firmware logging level. Requires GuC to be loaded. "
drivers/gpu/drm/i915/i915_params.h +1 -1
@@ -47,7 +47,7 @@ struct drm_printer; param(int, disable_power_well, -1) \ param(int, enable_ips, 1) \ param(int, invert_brightness, 0) \ - param(int, enable_guc, 0) \ + param(int, enable_guc, -1) \ param(int, guc_log_level, 0) \ param(char *, guc_firmware_path, NULL) \param (char *, huc_firmware_path, NULL) \
Signature · 6 lines
2.7.4 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for series starting with [v11,1/6] drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
In reply to Jackie Li== Series Details ==
== Series Details ==
Series: series starting with [v11,1/6] drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
URL : https://patchwork.freedesktop.org/series/39176/
State : failure
== Summary ==
Series 39176v1 series starting with [v11,1/6] drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
https://patchwork.freedesktop.org/api/1.0/series/39176/revisions/1/mbox/
---- Possible new issues:
Test core_auth:
Subgroup basic-auth:
pass -> SKIP (fi-skl-gvtdvm)
Test core_prop_blob:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test debugfs_test:
Subgroup read_all_entries:
pass -> SKIP (fi-skl-gvtdvm)
Test drv_getparams_basic:
Subgroup basic-eu-total:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-subslice-total:
pass -> SKIP (fi-skl-gvtdvm)
Test drv_hangman:
Subgroup error-state-basic:
pass -> SKIP (fi-skl-gvtdvm)
Test drv_module_reload:
Subgroup basic-no-display:
pass -> DMESG-FAIL (fi-skl-gvtdvm)
Subgroup basic-reload:
pass -> DMESG-FAIL (fi-skl-gvtdvm)
Subgroup basic-reload-inject:
pass -> DMESG-FAIL (fi-skl-gvtdvm)
Test gem_basic:
Subgroup bad-close:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup create-close:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup create-fd-close:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_busy:
Subgroup basic-busy-default:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_close_race:
Subgroup basic-process:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-threads:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_cpu_reloc:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_cs_tlb:
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_create:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-files:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_exec:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_param:
Subgroup basic:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_ctx_switch:
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default-heavy:
pass -> SKIP (fi-skl-gvtdvm)
Test gem_exec_basic:
Subgroup basic-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd1:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-bsd2:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-render:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup basic-vebox:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd1:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-bsd2:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-default:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-render:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup gtt-vebox:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-blt:
pass -> SKIP (fi-skl-gvtdvm)
Subgroup readonly-bsd:WARNING: Long output truncated
d8a07978aff3aef5cb6a8105ca4996cde837bd2f drm-tip: 2018y-02m-28d-21h-21m-07s UTC integration manifest cb533c953af5 HAX Enable GuC Submission for CI9ab4ac19f48b drm/i915/guc: Check the locking status of GuC WOPCM registers 1dbad0a3d83a drm/i915: Add HuC firmware size related restriction for Gen9 and CNL A0 7c95388257de drm/i915: Add support to return CNL specific reserved WOPCM size 90d692ac4183 drm/i915: Implement dynamic GuC WOPCM offset and size calculation 3f48b9f958af drm/i915/guc: Rename guc_ggtt_offset to intel_guc_ggtt_offset
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8192/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 28 lines · Jackie Li
GuC related exported functions should start with "
intel_guc_" prefix and passintel_gucas the first parameter since its GuC related. Currentguc_ggtt_offset()failed to follow this code convention and this is a problem for future patches that needs to accessintel_gucdata to verify the GGTT offset against the GuC WOPCM top.This patch renames the
guc_ggtt_offsettointel_guc_ggtt_offsetand updates the related code to passintel_gucpointer to this function call, so that we can have a unified coding style for GuC code and also enable the future patches to get GuC related data fromintel_gucto do the offset verification. Meanwhile, this patch also moves theGUC_GGTT_TOPfromintel_guc_regs.htointel_guc.hsince it is not GuC register related definition.v8:
- Fixed coding style issues and movedGUC_GGTT_TOPtointel_guc.h
(Sagar)
- Updated commit message to explain to reason and motivation to addintel_gucas the first parameter ofintel_guc_ggtt_offset(Chris)v9:
- Fixed code alignment issue due to line break (Chris)v10:
- Removed unnecessary comments, redundant code and avoided reuse
variable
to avoid potential issues (Joonas)
Quoted 8 lines
Cc Michal Wajdeczko <[email protected]>Cc Sagar Arun Kamble <[email protected]>Cc Chris Wilson <[email protected]>Cc Joonas Lahtinen <[email protected]>Reviewed-by Sagar Arun Kamble <[email protected]> (v8)Reviewed-by Joonas Lahtinen <[email protected]> (v9)Signed-off-by Jackie Li <[email protected]>---
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx