x86/kconfig: Remove residual "no-hlt" boot parameter reference
PATCH 1/1 x86/kconfig: Remove residual "no-hlt" boot parameter reference
The "no-hlt" boot parameter has been removed ~5 years ago :
The commit 27be457000211a6903968dfce06d5f73f051a217
("x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag")Remove a stale reference from the documentation as well.
Signed-off-by zhenwei.pi <[email protected]>
--- arch/x86/Kconfig | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)
arch/x86/Kconfig +10 -11
@@ -2494,19 +2494,18 @@ menuconfig APM 1) make sure that you have enough swap space and that it is enabled. - 2) pass the "no-hlt" option to the kernel - 3) switch on floating point emulation in the kernel and pass + 2) switch on floating point emulation in the kernel and pass the "no387" option to the kernel - 4) pass the "floppy=nodma" option to the kernel - 5) pass the "mem=4M" option to the kernel (thereby disabling + 3) pass the "floppy=nodma" option to the kernel + 4) pass the "mem=4M" option to the kernel (thereby disabling all but the first 4 MB of RAM) - 6) make sure that the CPU is not over clocked. - 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> - 8) disable the cache from your BIOS settings - 9) install a fan for the video card or exchange video RAM - 10) install a better fan for the CPU - 11) exchange RAM chips - 12) exchange the motherboard. + 5) make sure that the CPU is not over clocked. + 6) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> + 7) disable the cache from your BIOS settings + 8) install a fan for the video card or exchange video RAM + 9) install a better fan for the CPU + 10) exchange RAM chips + 11) exchange the motherboard. To compile this driver as a module, choose M here: the module will be called apm.
Signature · 1 line
2.7.4
Quoted 32 lines · zhenwei.pi
The "no-hlt" boot parameter has been removed ~5 years ago :
The commit 27be457000211a6903968dfce06d5f73f051a217 ("x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag")Remove a stale reference from the documentation as well.
Signed-off-by zhenwei.pi <[email protected]>--- arch/x86/Kconfig | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-)arch/x86/Kconfig +3
-8@@ -2494,19 +2494,18 @@ menuconfig APM 1) make sure that you have enough swap space and that it is enabled. - 2) pass the "no-hlt" option to the kernel - 3) switch on floating point emulation in the kernel and pass + 2) switch on floating point emulation in the kernel and pass the "no387" option to the kernel - 4) pass the "floppy=nodma" option to the kernel - 5) pass the "mem=4M" option to the kernel (thereby disabling + 3) pass the "floppy=nodma" option to the kernel + 4) pass the "mem=4M" option to the kernel (thereby disabling all but the first 4 MB of RAM) - 6) make sure that the CPU is not over clocked. - 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> - 8) disable the cache from your BIOS settings - 9) install a fan for the video card or exchange video RAM
arch/x86/Kconfig menuconfig APM · line 2508
Quoted 10 lines
arch/x86/Kconfig +7
-3- 10) install a better fan for the CPU - 11) exchange RAM chips - 12) exchange the motherboard. + 5) make sure that the CPU is not over clocked. + 6) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/> + 7) disable the cache from your BIOS settings + 8) install a fan for the video card or exchange video RAM + 9) install a better fan for the CPU + 10) exchange RAM chips + 11) exchange the motherboard.
That description is stale in other ways as well (nobody uses floppies anymore), I'd just remove it altogether, starting with this:
If you get
random kernel OOPSes or reboots that don't seem to be related to anything, try disabling/enabling this option (or disabling/enabling APM in your BIOS).
[...]
Thanks,
Ingo