Skip to contentSkip to conversation

Patch "xhci: fix endpoint context tracer output" has been added to the 4.14-stable tree

PATCH [email protected] 1 participant 1 message Mar 16, 2018

Subsystems (3)
Stable branch USB USB xHCI driver
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

xhci: fix endpoint context tracer output

to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
xhci-fix-endpoint-context-tracer-output.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From 97ef0faf575e03b352553f92c9430cb4c0431436 Mon Sep 17 00:00:00 2001

From: Mathias Nyman <[email protected]>
Date: Thu, 8 Mar 2018 17:17:14 +0200
Subject: xhci: fix endpoint context tracer output

From: Mathias Nyman <[email protected]>

commit 97ef0faf575e03b352553f92c9430cb4c0431436 upstream.

Fix incorrent values showed for max Primary stream and Linear stream array (LSA) values in the endpoint context decoder.

Fixes 19a7d0d65c4a ("usb: host: xhci: add Slot and EP Context tracers")
Cc <[email protected]> # v4.12+
Signed-off-by Mathias Nyman <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/host/xhci.h |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/usb/host/xhci.h +12 -10
@@ -728,11 +728,12 @@ struct xhci_ep_ctx {
 /* bits 10:14 are Max Primary Streams */
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
-#define EP_INTERVAL(p)		(((p) & 0xff) << 16)
-#define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
-#define CTX_TO_EP_INTERVAL(p)	(((p) >> 16) & 0xff)
-#define EP_MAXPSTREAMS_MASK	(0x1f << 10)
-#define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
+#define EP_INTERVAL(p)			(((p) & 0xff) << 16)
+#define EP_INTERVAL_TO_UFRAMES(p)	(1 << (((p) >> 16) & 0xff))
+#define CTX_TO_EP_INTERVAL(p)		(((p) >> 16) & 0xff)
+#define EP_MAXPSTREAMS_MASK		(0x1f << 10)
+#define EP_MAXPSTREAMS(p)		(((p) << 10) & EP_MAXPSTREAMS_MASK)
+#define CTX_TO_EP_MAXPSTREAMS(p)	(((p) & EP_MAXPSTREAMS_MASK) >> 10)
 /* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
 #define	EP_HAS_LSA		(1 << 15)
 /* hosts with LEC=1 use bits 31:24 as ESIT high bits. */

@@ -2540,21 +2541,22 @@ static inline const char *xhci_decode_ep
 	u8 burst;
 	u8 cerr;
 	u8 mult;
-	u8 lsa;
-	u8 hid;
+
+	bool lsa;
+	bool hid;
 
 	esit = CTX_TO_MAX_ESIT_PAYLOAD_HI(info) << 16 |
 		CTX_TO_MAX_ESIT_PAYLOAD(tx_info);
 
 	ep_state = info & EP_STATE_MASK;
-	max_pstr = info & EP_MAXPSTREAMS_MASK;
+	max_pstr = CTX_TO_EP_MAXPSTREAMS(info);
 	interval = CTX_TO_EP_INTERVAL(info);
 	mult = CTX_TO_EP_MULT(info) + 1;
-	lsa = info & EP_HAS_LSA;
+	lsa = !!(info & EP_HAS_LSA);
 
 	cerr = (info2 & (3 << 1)) >> 1;
 	ep_type = CTX_TO_EP_TYPE(info2);
-	hid = info2 & (1 << 7);
+	hid = !!(info2 & (1 << 7));
 	burst = CTX_TO_MAX_BURST(info2);
 	maxp = MAX_PACKET_DECODED(info2);

Patches currently in stable-queue which might be from [email protected] are

queue-4.14/xhci-fix-front-usb-ports-on-asus-prime-b350m-a.patch queue-4.14/xhci-fix-endpoint-context-tracer-output.patch