Patch "iio: adc: ina2xx: Shift bus voltage register to mask flag bits" has been added to the 4.14-stable tree

@@ -44,7 +44,6 @@
 
 #define INA226_MASK_ENABLE		0x06
 #define INA226_CVRF			BIT(3)
-#define INA219_CNVR			BIT(1)
 
 #define INA2XX_MAX_REGISTERS            8
 

@@ -79,6 +78,11 @@
 #define INA226_ITS_MASK		GENMASK(5, 3)
 #define INA226_SHIFT_ITS(val)	((val) << 3)
 
+/* INA219 Bus voltage register, low bits are flags */
+#define INA219_OVF		BIT(0)
+#define INA219_CNVR		BIT(1)
+#define INA219_BUS_VOLTAGE_SHIFT	3
+
 /* Cosmetic macro giving the sampling period for a full P=UxI cycle */
 #define SAMPLING_PERIOD(c)	((c->int_time_vbus + c->int_time_vshunt) \
 				 * c->avg)

@@ -112,7 +116,7 @@ struct ina2xx_config {
 	u16 config_default;
 	int calibration_factor;
 	int shunt_div;
-	int bus_voltage_shift;
+	int bus_voltage_shift;	/* position of lsb */
 	int bus_voltage_lsb;	/* uV */
 	int power_lsb;		/* uW */
 	enum ina2xx_ids chip_id;

@@ -135,7 +139,7 @@ static const struct ina2xx_config ina2xx
 		.config_default = INA219_CONFIG_DEFAULT,
 		.calibration_factor = 40960000,
 		.shunt_div = 100,
-		.bus_voltage_shift = 3,
+		.bus_voltage_shift = INA219_BUS_VOLTAGE_SHIFT,
 		.bus_voltage_lsb = 4000,
 		.power_lsb = 20000,
 		.chip_id = ina219,

@@ -170,6 +174,9 @@ static int ina2xx_read_raw(struct iio_de
 		else
 			*val  = regval;
 
+		if (chan->address == INA2XX_BUS_VOLTAGE)
+			*val >>= chip->config->bus_voltage_shift;
+
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:

@@ -203,9 +210,9 @@ static int ina2xx_read_raw(struct iio_de
 			return IIO_VAL_FRACTIONAL;
 
 		case INA2XX_BUS_VOLTAGE:
-			/* processed (mV) = raw*lsb (uV) / (1000 << shift) */
+			/* processed (mV) = raw * lsb (uV) / 1000 */
 			*val = chip->config->bus_voltage_lsb;
-			*val2 = 1000 << chip->config->bus_voltage_shift;
+			*val2 = 1000;
 			return IIO_VAL_FRACTIONAL;
 
 		case INA2XX_POWER:

@@ -532,7 +539,7 @@ static ssize_t ina2xx_shunt_resistor_sto
  * Sampling Freq is a consequence of the integration times of
  * the Voltage channels.
  */
-#define INA219_CHAN_VOLTAGE(_index, _address) { \
+#define INA219_CHAN_VOLTAGE(_index, _address, _shift) { \
 	.type = IIO_VOLTAGE, \
 	.address = (_address), \
 	.indexed = 1, \

@@ -544,7 +551,8 @@ static ssize_t ina2xx_shunt_resistor_sto
 	.scan_index = (_index), \
 	.scan_type = { \
 		.sign = 'u', \
-		.realbits = 16, \
+		.shift = _shift, \
+		.realbits = 16 - _shift, \
 		.storagebits = 16, \
 		.endianness = IIO_LE, \
 	} \

@@ -579,8 +587,8 @@ static const struct iio_chan_spec ina226
 };
 
 static const struct iio_chan_spec ina219_channels[] = {
-	INA219_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE),
-	INA219_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE),
+	INA219_CHAN_VOLTAGE(0, INA2XX_SHUNT_VOLTAGE, 0),
+	INA219_CHAN_VOLTAGE(1, INA2XX_BUS_VOLTAGE, INA219_BUS_VOLTAGE_SHIFT),
 	INA219_CHAN(IIO_POWER, 2, INA2XX_POWER),
 	INA219_CHAN(IIO_CURRENT, 3, INA2XX_CURRENT),
 	IIO_CHAN_SOFT_TIMESTAMP(4),