Skip to contentSkip to conversation

usb/gadget: Add driver for Aspeed SoC virtual hub

PATCH Superseded Benjamin Herrenschmidt 1 participant 1 message Mar 17, 2018 USB

v4 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

PATCH v4 2/2 usb/gadget: Add driver for Aspeed SoC virtual hub

Quoted 13 lines · Alan Stern
Quoted 11 lines · Benjamin Herrenschmidt
Quoted 5 lines · Benjamin Herrenschmidt
Quoted 3 lines
Quoted 1 line

Do you have more comments for the rest of the driver or that's it ?

so far, that's it.

Ok. I'll re-send.

So I'll resend in a minute, doing a few more tests, however, I've noticed something which I wont' have time to track down til at best next week, I wonder if it's normal/expected.

Quoted 7 lines
Quoted 3 lines

If I just create a mass storage function set to be "removable" and "cdrom" with no file attached, and enable it, I get an endless stream of resets. It looks like the host constantly does USB resets.

That's not why I get. There's an endless stream of messages, but it doesn't include any resets. Just command failures and endpoint halts. For example:

.../...

In my case, I was getting resets on the host:

[383250.844611] usb 1-1: new high-speed USB device number 84 using xhci_hcd
[383250.972235] usb 1-1: New USB device found, idVendor=1d6b, idProduct=0107
[383250.972244] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[383250.972251] usb 1-1: Product: USB Virtual Hub
[383250.972257] usb 1-1: Manufacturer: Aspeed
[383250.972262] usb 1-1: SerialNumber: 00000000
[383250.979127] hub 1-1:1.0: USB hub found
[383250.979218] hub 1-1:1.0: 5 ports detected
[383284.910195] usb 1-1.1: new high-speed USB device number 85 using xhci_hcd
[383284.988326] usb 1-1.1: New USB device found, idVendor=1d6b, idProduct=0104
[383284.988339] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[383284.988349] usb 1-1.1: Product: Bar Gadget
[383284.988358] usb 1-1.1: Manufacturer: Foo Inc.
[383284.988366] usb 1-1.1: SerialNumber: 0123456789
[383285.000159] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[383285.000613] scsi host3: usb-storage 1-1.1:1.0
[383286.063152] scsi 3:0:0:0: CD-ROM            Linux    File-CD Gadget   0416 PQ: 0 ANSI: 2
[383286.064148] sr 3:0:0:0: Power-on or device reset occurred
[383286.129411] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383286.284397] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383286.438396] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383286.593487] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383286.676863] sr 3:0:0:0: [sr0] scsi-1 drive
[383286.676871] cdrom: Uniform CD-ROM driver Revision: 3.20
[383286.678558] sr 3:0:0:0: Attached scsi CD-ROM sr0
[383286.679426] sr 3:0:0:0: Attached scsi generic sg2 type 5
[383286.746343] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383286.901458] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383287.056423] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383287.211445] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383287.360422] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383287.516295] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383287.671464] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383287.827423] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd
[383287.912048] sr 3:0:0:0: Power-on or device reset occurred
[383288.013376] usb 1-1.1: reset high-speed USB device number 85 using xhci_hcd

The guest just show config selection messages. I'll dig a bit next week in case there's an issue with my UDC driver there.

As for ...

Quoted 7 lines

It's worth pointing out that all those messages are at DEBUG level. Although they fill up the kernel's log buffer, they won't be noticeable to most users.

In any case, g-mass-storage was never intended be a complete emulation of a CD or DVD drive. Its support for those modes is minimal; it was originally intended just to emulate a hard disk drive.

Then it will be worthwhile me or somebody else spending a bit of time beefing it up a little bit. I'll see if I can spare time in the next couple of weeks.

The Aspeed chip is a BMC chip, ie server management processor, and is connected via the USB gadget to the actual server (the host). One of the usage scenario here is to use USB gadget to present distro ISOs as USB CD/DVDs to the host for remote provisioning (sourced over the network via something like nbd).

Note that due to the limitation of having to use a file or a block device, we might end up doing a userspace CDROM emulation instead that can source ISOs via things like HTTPS instead, but initially the above is what we are toying with.

Cheers,
Ben.

Quoted 6 lines

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html