Patch "ARM: dts: Adjust moxart IRQ controller and flags" has been added to the 4.4-stable tree
Subsystems (2)
This is a note to let you know that I've just added the patch titled
ARM: dts: Adjust moxart IRQ controller and flags
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-dts-adjust-moxart-irq-controller-and-flags.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From foo@baz Mon Mar 19 09:58:12 CET 2018
From: Linus Walleij <[email protected]>
Date: Sat, 18 Mar 2017 17:40:01 +0100
Subject: ARM: dts: Adjust moxart IRQ controller and flags
From: Linus Walleij <[email protected]>
[ Upstream commit c2a736b698008d296c5010ec39077eeb5796109f ]
The moxart interrupt line flags were not respected in previous
driver: instead of assigning them per-consumer, a fixes mask was set in the controller.
With the migration to a standard Faraday driver we need to set up and handle the consumer flags correctly. Also remove the Moxart-specific flags when switching to using real consumer flags.
Extend the register window to 0x100 bytes as we may have a few more registers in there and it doesn't hurt.
--- arch/arm/boot/dts/moxart-uc7112lx.dts | 2 +- arch/arm/boot/dts/moxart.dtsi | 17 +++++++++-------- 2 files changed, 10 insertions(+), 9 deletions(-)
arch/arm/boot/dts/moxart-uc7112lx.dts +1 -1
@@ -6,7 +6,7 @@ */ /dts-v1/; -/include/ "moxart.dtsi" +#include "moxart.dtsi" / { model = "MOXA UC-7112-LX";
arch/arm/boot/dts/moxart.dtsi +9 -8
@@ -6,6 +6,7 @@ */ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "moxa,moxart";
@@ -36,8 +37,8 @@ ranges; intc: interrupt-controller@98800000 { - compatible = "moxa,moxart-ic"; - reg = <0x98800000 0x38>; + compatible = "moxa,moxart-ic", "faraday,ftintc010"; + reg = <0x98800000 0x100>; interrupt-controller; #interrupt-cells = <2>; interrupt-mask = <0x00080000>;
@@ -59,7 +60,7 @@ timer: timer@98400000 { compatible = "moxa,moxart-timer"; reg = <0x98400000 0x42>; - interrupts = <19 1>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; clocks = <&clk_apb>; };
@@ -80,7 +81,7 @@ dma: dma@90500000 { compatible = "moxa,moxart-dma"; reg = <0x90500080 0x40>; - interrupts = <24 0>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; };
@@ -93,7 +94,7 @@ sdhci: sdhci@98e00000 { compatible = "moxa,moxart-sdhci"; reg = <0x98e00000 0x5C>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_apb>; dmas = <&dma 5>, <&dma 5>;
@@ -120,7 +121,7 @@ mac0: mac@90900000 { compatible = "moxa,moxart-mac"; reg = <0x90900000 0x90>; - interrupts = <25 0>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; phy-handle = <ðphy0>; phy-mode = "mii"; status = "disabled";
@@ -129,7 +130,7 @@ mac1: mac@92000000 { compatible = "moxa,moxart-mac"; reg = <0x92000000 0x90>; - interrupts = <27 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; phy-handle = <ðphy1>; phy-mode = "mii"; status = "disabled";
@@ -138,7 +139,7 @@ uart0: uart@98200000 { compatible = "ns16550a"; reg = <0x98200000 0x20>; - interrupts = <31 8>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clock-frequency = <14745600>;
Patches currently in stable-queue which might be from [email protected] are
queue-4.4/arm-dts-adjust-moxart-irq-controller-and-flags.patch