Skip to contentSkip to conversation

drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection

PATCH Superseded Oscar Mateo 5 participants 9 messages Mar 20, 2018 – Mar 21, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection

From: Kelvin Gardiner <[email protected]>

This patch adds support to detect ICL, slice, subslice and EU fuse settings.

Add addresses for ICL 11 slice, subslice and EU fuses registers. These register addresses are the same as previous platforms but the format and / or the meaning of the information is different. Therefore Gen11 defines for these registers are added.

Bspec: 9731
Bspec: 20643
Bspec: 20673

v2: Update fusing information storage after introducing the new query
uAPI (Lionel)

v3 (Oscar):
- The maximum number of slices in ICL 11 is 1
- The subslice disable fuse can potentially store information in all bits
- GEN_MAX_SUBSLICES has to be increased to 8
- Don't trust the slice enabled fuse outside the max number of expected slices
- Indentation fix and some reordering and renaming of local variables

---
 drivers/gpu/drm/i915/i915_reg.h          |  8 ++++++
 drivers/gpu/drm/i915/intel_device_info.c | 43 +++++++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_device_info.h |  2 +-
 3 files changed, 51 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +8 -0
index dc41961..1f47806 100644
@@ -2554,6 +2554,14 @@ enum i915_power_well_id {
 #define   GEN11_GT_VEBOX_DISABLE_SHIFT	16
 #define   GEN11_GT_VEBOX_DISABLE_MASK	(0xff << GEN11_GT_VEBOX_DISABLE_SHIFT)
 
+#define GEN11_EU_DISABLE _MMIO(0x9134)
+#define GEN11_EU_DIS_MASK 0xFF
+
+#define GEN11_GT_SLICE_ENABLE _MMIO(0x9138)
+#define GEN11_GT_S_ENA_MASK 0xFF
+
+#define GEN11_GT_SUBSLICE_DISABLE _MMIO(0x913C)
+
 #define GEN6_BSD_SLEEP_PSMI_CONTROL	_MMIO(0x12050)
 #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
 #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
drivers/gpu/drm/i915/intel_device_info.c +42 -1

56 lines not on this page · raw message

drivers/gpu/drm/i915/intel_device_info.h +1 -1
index 0cbb922..933e316 100644
@@ -114,7 +114,7 @@ enum intel_platform {
 	func(has_ipc);
 
 #define GEN_MAX_SLICES		(6) /* CNL upper bound */
-#define GEN_MAX_SUBSLICES	(7)
+#define GEN_MAX_SUBSLICES	(8) /* ICL upper bound */
 
 struct sseu_dev_info {
 	u8 slice_mask;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Reviewed-by on v3 1/1
#1 lore raw
Quoted 27 lines · Oscar Mateo

From: Kelvin Gardiner <[email protected]>

This patch adds support to detect ICL, slice, subslice and EU fuse settings.

Add addresses for ICL 11 slice, subslice and EU fuses registers. These register addresses are the same as previous platforms but the format and / or the meaning of the information is different. Therefore Gen11 defines for these registers are added.

Bspec: 9731
Bspec: 20643
Bspec: 20673

v2: Update fusing information storage after introducing the new query
uAPI (Lionel)

v3 (Oscar):
- The maximum number of slices in ICL 11 is 1
- The subslice disable fuse can potentially store information in all bits
- GEN_MAX_SUBSLICES has to be increased to 8
- Don't trust the slice enabled fuse outside the max number of expected slices
- Indentation fix and some reordering and renaming of local variables

Quoted 4 lines
Quoted 92 lines
---
  drivers/gpu/drm/i915/i915_reg.h          |  8 ++++++
  drivers/gpu/drm/i915/intel_device_info.c | 43 +++++++++++++++++++++++++++++++-
  drivers/gpu/drm/i915/intel_device_info.h |  2 +-
  3 files changed, 51 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +8 -0
index dc41961..1f47806 100644
@@ -2554,6 +2554,14 @@ enum i915_power_well_id {
  #define   GEN11_GT_VEBOX_DISABLE_SHIFT	16
  #define   GEN11_GT_VEBOX_DISABLE_MASK	(0xff << GEN11_GT_VEBOX_DISABLE_SHIFT)
 
+#define GEN11_EU_DISABLE _MMIO(0x9134)
+#define GEN11_EU_DIS_MASK 0xFF
+
+#define GEN11_GT_SLICE_ENABLE _MMIO(0x9138)
+#define GEN11_GT_S_ENA_MASK 0xFF
+
+#define GEN11_GT_SUBSLICE_DISABLE _MMIO(0x913C)
+
  #define GEN6_BSD_SLEEP_PSMI_CONTROL	_MMIO(0x12050)
  #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
  #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
drivers/gpu/drm/i915/intel_device_info.c +42 -1
index 4babfc6..a504281 100644
@@ -158,6 +158,45 @@ static u16 compute_eu_total(const struct sseu_dev_info *sseu)
  	return total;
  }
 
+static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
+	u8 s_en;
+	u32 ss_en, ss_en_mask;
+	u8 eu_en;
+	int s;
+
+	sseu->max_slices = 1;
+	sseu->max_subslices = 8;
+	sseu->max_eus_per_subslice = 8;
+
+	s_en = I915_READ(GEN11_GT_SLICE_ENABLE) & GEN11_GT_S_ENA_MASK;
+	ss_en = ~I915_READ(GEN11_GT_SUBSLICE_DISABLE);
+	ss_en_mask = BIT(sseu->max_subslices) - 1;
+	eu_en = ~(I915_READ(GEN11_EU_DISABLE) & GEN11_EU_DIS_MASK);
+
+	for (s = 0; s < sseu->max_slices; s++) {
+		if (s_en & BIT(s)) {
+			int ss_idx = sseu->max_subslices * s;
+			int ss;
+
+			sseu->slice_mask |= BIT(s);
+			sseu->subslice_mask[s] = (ss_en >> ss_idx) & ss_en_mask;
+			for (ss = 0; ss < sseu->max_subslices; ss++) {
+				if (sseu->subslice_mask[s] & BIT(ss))
+					sseu_set_eus(sseu, s, ss, eu_en);
+			}
+		}
+	}
+	sseu->eu_per_subslice = hweight8(eu_en);
+	sseu->eu_total = compute_eu_total(sseu);
+
+	/* ICL has no power gating restrictions. */
+	sseu->has_slice_pg = 1;
+	sseu->has_subslice_pg = 1;
+	sseu->has_eu_pg = 1;
+}
+
  static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)
  {
  	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
@@ -768,8 +807,10 @@ void intel_device_info_runtime_init(struct intel_device_info *info)
  		broadwell_sseu_info_init(dev_priv);
  	else if (INTEL_GEN(dev_priv) == 9)
  		gen9_sseu_info_init(dev_priv);
-	else if (INTEL_GEN(dev_priv) >= 10)
+	else if (INTEL_GEN(dev_priv) == 10)
  		gen10_sseu_info_init(dev_priv);
+	else if (INTEL_INFO(dev_priv)->gen >= 11)
+		gen11_sseu_info_init(dev_priv);
 
  	/* Initialize command stream timestamp frequency */
  	info->cs_timestamp_frequency_khz = read_timestamp_frequency(dev_priv);
drivers/gpu/drm/i915/intel_device_info.h +0 -0
index 0cbb922..933e316 100644

drivers/gpu/drm/i915/intel_device_info.h enum intel_platform { · line 120

Quoted 8 lines
drivers/gpu/drm/i915/intel_device_info.h +1 -1
@@ -114,7 +114,7 @@ enum intel_platform {
  	func(has_ipc);
 
  #define GEN_MAX_SLICES		(6) /* CNL upper bound */
-#define GEN_MAX_SUBSLICES	(7)
+#define GEN_MAX_SUBSLICES	(8) /* ICL upper bound */
 
  struct sseu_dev_info {
  	u8 slice_mask;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw

PATCH v4 1/1 drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection

From: Kelvin Gardiner <[email protected]>

This patch adds support to detect ICL, slice, subslice and EU fuse settings.

Add addresses for ICL 11 slice, subslice and EU fuses registers. These register addresses are the same as previous platforms but the format and / or the meaning of the information is different. Therefore Gen11 defines for these registers are added.

Bspec: 9731
Bspec: 20643
Bspec: 20673

v2: Update fusing information storage after introducing the new query
uAPI (Lionel)

v3 (Oscar):
- The maximum number of slices in ICL 11 is 1
- The subslice disable fuse can potentially store information in all bits
- GEN_MAX_SUBSLICES has to be increased to 8
- Don't trust the slice enabled fuse outside the max number of expected slices
- Indentation fix and some reordering and renaming of local variables

v4: Use single space after Cc tag

---
 drivers/gpu/drm/i915/i915_reg.h          |  8 ++++++
 drivers/gpu/drm/i915/intel_device_info.c | 43 +++++++++++++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_device_info.h |  2 +-
 3 files changed, 51 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +8 -0
index dc41961..1f47806 100644
@@ -2554,6 +2554,14 @@ enum i915_power_well_id {
 #define   GEN11_GT_VEBOX_DISABLE_SHIFT	16
 #define   GEN11_GT_VEBOX_DISABLE_MASK	(0xff << GEN11_GT_VEBOX_DISABLE_SHIFT)
 
+#define GEN11_EU_DISABLE _MMIO(0x9134)
+#define GEN11_EU_DIS_MASK 0xFF
+
+#define GEN11_GT_SLICE_ENABLE _MMIO(0x9138)
+#define GEN11_GT_S_ENA_MASK 0xFF
+
+#define GEN11_GT_SUBSLICE_DISABLE _MMIO(0x913C)
+
 #define GEN6_BSD_SLEEP_PSMI_CONTROL	_MMIO(0x12050)
 #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
 #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
drivers/gpu/drm/i915/intel_device_info.c +42 -1

56 lines not on this page · raw message

drivers/gpu/drm/i915/intel_device_info.h +1 -1
index 0cbb922..933e316 100644
@@ -114,7 +114,7 @@ enum intel_platform {
 	func(has_ipc);
 
 #define GEN_MAX_SLICES		(6) /* CNL upper bound */
-#define GEN_MAX_SUBSLICES	(7)
+#define GEN_MAX_SUBSLICES	(8) /* ICL upper bound */
 
 struct sseu_dev_info {
 	u8 slice_mask;
Signature · 6 lines
1.9.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw
Quoted 110 lines · Oscar Mateo

From: Kelvin Gardiner <[email protected]>

This patch adds support to detect ICL, slice, subslice and EU fuse settings.

Add addresses for ICL 11 slice, subslice and EU fuses registers. These register addresses are the same as previous platforms but the format and / or the meaning of the information is different. Therefore Gen11 defines for these registers are added.

Bspec: 9731
Bspec: 20643
Bspec: 20673

v2: Update fusing information storage after introducing the new query
uAPI (Lionel)

v3 (Oscar):
- The maximum number of slices in ICL 11 is 1
- The subslice disable fuse can potentially store information in all bits
- GEN_MAX_SUBSLICES has to be increased to 8
- Don't trust the slice enabled fuse outside the max number of expected slices
- Indentation fix and some reordering and renaming of local variables

v4: Use single space after Cc tag

---
  drivers/gpu/drm/i915/i915_reg.h          |  8 ++++++
  drivers/gpu/drm/i915/intel_device_info.c | 43 +++++++++++++++++++++++++++++++-
  drivers/gpu/drm/i915/intel_device_info.h |  2 +-
  3 files changed, 51 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +8 -0
index dc41961..1f47806 100644
@@ -2554,6 +2554,14 @@ enum i915_power_well_id {
  #define   GEN11_GT_VEBOX_DISABLE_SHIFT	16
  #define   GEN11_GT_VEBOX_DISABLE_MASK	(0xff << GEN11_GT_VEBOX_DISABLE_SHIFT)
 
+#define GEN11_EU_DISABLE _MMIO(0x9134)
+#define GEN11_EU_DIS_MASK 0xFF
+
+#define GEN11_GT_SLICE_ENABLE _MMIO(0x9138)
+#define GEN11_GT_S_ENA_MASK 0xFF
+
+#define GEN11_GT_SUBSLICE_DISABLE _MMIO(0x913C)
+
  #define GEN6_BSD_SLEEP_PSMI_CONTROL	_MMIO(0x12050)
  #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
  #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
drivers/gpu/drm/i915/intel_device_info.c +39 -0
index 4babfc6..a504281 100644
@@ -158,6 +158,45 @@ static u16 compute_eu_total(const struct sseu_dev_info *sseu)
  	return total;
  }
 
+static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
+	u8 s_en;
+	u32 ss_en, ss_en_mask;
+	u8 eu_en;
+	int s;
+
+	sseu->max_slices = 1;
+	sseu->max_subslices = 8;
+	sseu->max_eus_per_subslice = 8;
+
+	s_en = I915_READ(GEN11_GT_SLICE_ENABLE) & GEN11_GT_S_ENA_MASK;
+	ss_en = ~I915_READ(GEN11_GT_SUBSLICE_DISABLE);
+	ss_en_mask = BIT(sseu->max_subslices) - 1;
+	eu_en = ~(I915_READ(GEN11_EU_DISABLE) & GEN11_EU_DIS_MASK);
+
+	for (s = 0; s < sseu->max_slices; s++) {
+		if (s_en & BIT(s)) {
+			int ss_idx = sseu->max_subslices * s;
+			int ss;
+
+			sseu->slice_mask |= BIT(s);
+			sseu->subslice_mask[s] = (ss_en >> ss_idx) & ss_en_mask;
+			for (ss = 0; ss < sseu->max_subslices; ss++) {
+				if (sseu->subslice_mask[s] & BIT(ss))
+					sseu_set_eus(sseu, s, ss, eu_en);
+			}
+		}
+	}
+	sseu->eu_per_subslice = hweight8(eu_en);
+	sseu->eu_total = compute_eu_total(sseu);
+
+	/* ICL has no power gating restrictions. */
+	sseu->has_slice_pg = 1;
+	sseu->has_subslice_pg = 1;
+	sseu->has_eu_pg = 1;
+}
+
  static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)
  {
  	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;

drivers/gpu/drm/i915/intel_device_info.c void intel_device_info_runtime_init(struct intel_device_info *info) · line 812

Quoted 7 lines
drivers/gpu/drm/i915/intel_device_info.c +2 -1
@@ -768,8 +807,10 @@ void intel_device_info_runtime_init(struct intel_device_info *info)
  		broadwell_sseu_info_init(dev_priv);
  	else if (INTEL_GEN(dev_priv) == 9)
  		gen9_sseu_info_init(dev_priv);
-	else if (INTEL_GEN(dev_priv) >= 10)
+	else if (INTEL_GEN(dev_priv) == 10)
  		gen10_sseu_info_init(dev_priv);
+	else if (INTEL_INFO(dev_priv)->gen >= 11)

INTEL_GEN(dev_priv) >= 11

Regards,

Tvrtko

Quoted 10 lines
drivers/gpu/drm/i915/intel_device_info.c +1 -0
+		gen11_sseu_info_init(dev_priv);
 
  	/* Initialize command stream timestamp frequency */
  	info->cs_timestamp_frequency_khz = read_timestamp_frequency(dev_priv);
drivers/gpu/drm/i915/intel_device_info.h +0 -0
index 0cbb922..933e316 100644

drivers/gpu/drm/i915/intel_device_info.h enum intel_platform { · line 120

Quoted 8 lines
drivers/gpu/drm/i915/intel_device_info.h +1 -1
@@ -114,7 +114,7 @@ enum intel_platform {
  	func(has_ipc);
 
  #define GEN_MAX_SLICES		(6) /* CNL upper bound */
-#define GEN_MAX_SUBSLICES	(7)
+#define GEN_MAX_SUBSLICES	(8) /* ICL upper bound */
 
  struct sseu_dev_info {
  	u8 slice_mask;

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#4 lore raw
Quoted 112 lines · Tvrtko Ursulin
Quoted 111 lines · Oscar Mateo

From: Kelvin Gardiner <[email protected]>

This patch adds support to detect ICL, slice, subslice and EU fuse settings.

Add addresses for ICL 11 slice, subslice and EU fuses registers. These register addresses are the same as previous platforms but the format and / or the meaning of the information is different. Therefore Gen11 defines for these registers are added.

Bspec: 9731
Bspec: 20643
Bspec: 20673

v2: Update fusing information storage after introducing the new query
uAPI (Lionel)

v3 (Oscar):
- The maximum number of slices in ICL 11 is 1
- The subslice disable fuse can potentially store information in all bits
- GEN_MAX_SUBSLICES has to be increased to 8
- Don't trust the slice enabled fuse outside the max number of expected slices
- Indentation fix and some reordering and renaming of local variables

v4: Use single space after Cc tag

---
  drivers/gpu/drm/i915/i915_reg.h          |  8 ++++++
  drivers/gpu/drm/i915/intel_device_info.c | 43 +++++++++++++++++++++++++++++++-
  drivers/gpu/drm/i915/intel_device_info.h |  2 +-
  3 files changed, 51 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +8 -0
index dc41961..1f47806 100644
@@ -2554,6 +2554,14 @@ enum i915_power_well_id {
  #define   GEN11_GT_VEBOX_DISABLE_SHIFT	16
  #define   GEN11_GT_VEBOX_DISABLE_MASK	(0xff << GEN11_GT_VEBOX_DISABLE_SHIFT)
 
+#define GEN11_EU_DISABLE _MMIO(0x9134)
+#define GEN11_EU_DIS_MASK 0xFF
+
+#define GEN11_GT_SLICE_ENABLE _MMIO(0x9138)
+#define GEN11_GT_S_ENA_MASK 0xFF
+
+#define GEN11_GT_SUBSLICE_DISABLE _MMIO(0x913C)
+
  #define GEN6_BSD_SLEEP_PSMI_CONTROL	_MMIO(0x12050)
  #define   GEN6_BSD_SLEEP_MSG_DISABLE	(1 << 0)
  #define   GEN6_BSD_SLEEP_FLUSH_DISABLE	(1 << 2)
drivers/gpu/drm/i915/intel_device_info.c +39 -0
index 4babfc6..a504281 100644
@@ -158,6 +158,45 @@ static u16 compute_eu_total(const struct sseu_dev_info *sseu)
  	return total;
  }
 
+static void gen11_sseu_info_init(struct drm_i915_private *dev_priv)
+{
+	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
+	u8 s_en;
+	u32 ss_en, ss_en_mask;
+	u8 eu_en;
+	int s;
+
+	sseu->max_slices = 1;
+	sseu->max_subslices = 8;
+	sseu->max_eus_per_subslice = 8;
+
+	s_en = I915_READ(GEN11_GT_SLICE_ENABLE) & GEN11_GT_S_ENA_MASK;
+	ss_en = ~I915_READ(GEN11_GT_SUBSLICE_DISABLE);
+	ss_en_mask = BIT(sseu->max_subslices) - 1;
+	eu_en = ~(I915_READ(GEN11_EU_DISABLE) & GEN11_EU_DIS_MASK);
+
+	for (s = 0; s < sseu->max_slices; s++) {
+		if (s_en & BIT(s)) {
+			int ss_idx = sseu->max_subslices * s;
+			int ss;
+
+			sseu->slice_mask |= BIT(s);
+			sseu->subslice_mask[s] = (ss_en >> ss_idx) & ss_en_mask;
+			for (ss = 0; ss < sseu->max_subslices; ss++) {
+				if (sseu->subslice_mask[s] & BIT(ss))
+					sseu_set_eus(sseu, s, ss, eu_en);
+			}
+		}
+	}
+	sseu->eu_per_subslice = hweight8(eu_en);
+	sseu->eu_total = compute_eu_total(sseu);
+
+	/* ICL has no power gating restrictions. */
+	sseu->has_slice_pg = 1;
+	sseu->has_subslice_pg = 1;
+	sseu->has_eu_pg = 1;
+}
+
  static void gen10_sseu_info_init(struct drm_i915_private *dev_priv)
  {
  	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
@@ -768,8 +807,10 @@ void intel_device_info_runtime_init(struct intel_device_info *info)
  		broadwell_sseu_info_init(dev_priv);
Quoted 8 lines

drivers/gpu/drm/i915/intel_device_info.c void intel_device_info_runtime_init(struct intel_device_info *info) · line 812

Quoted 6 lines
drivers/gpu/drm/i915/intel_device_info.c +2 -1
  	else if (INTEL_GEN(dev_priv) == 9)
  		gen9_sseu_info_init(dev_priv);
-	else if (INTEL_GEN(dev_priv) >= 10)
+	else if (INTEL_GEN(dev_priv) == 10)
  		gen10_sseu_info_init(dev_priv);
+	else if (INTEL_INFO(dev_priv)->gen >= 11)

INTEL_GEN(dev_priv) >= 11

I was too quick with this patch. Already pushed :O

Thanks for patch and review.
-Mika

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#5 lore raw

✗ Fi.CI.CHECKPATCH: warning for drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection

In reply to Oscar Mateo
== Series Details ==

== Series Details ==

Series: drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection
URL : https://patchwork.freedesktop.org/series/40315/
State : warning

== Summary ==

$ dim checkpatch origin/drm-tip
f61c5df8f12d drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection
-:32: WARNING:BAD_SIGN_OFF: Use a single space after Cc:
#32: 
Cc:  Mika Kuoppala <[email protected]>

total: 0 errors, 1 warnings, 0 checks, 78 lines checked

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#6 lore raw

✓ Fi.CI.BAT: success for drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection

In reply to Oscar Mateo
== Series Details ==

== Series Details ==

Series: drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection
URL : https://patchwork.freedesktop.org/series/40315/
State : success

== Summary ==

Series 40315v1 drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection
https://patchwork.freedesktop.org/api/1.0/series/40315/revisions/1/mbox/

---- Possible new issues:

Test kms_pipe_crc_basic:

        Subgroup suspend-read-crc-pipe-a:
                incomplete -> PASS       (fi-cfl-s2)

---- Known issues:

Test gem_mmap_gtt:

        Subgroup basic-small-bo-tiledx:
                pass       -> FAIL       (fi-gdg-551) fdo#102575

fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575

fi-bdw-5557u     total:285  pass:264  dwarn:0   dfail:0   fail:0   skip:21  time:430s
fi-bdw-gvtdvm    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:441s
fi-blb-e6850     total:285  pass:220  dwarn:1   dfail:0   fail:0   skip:64  time:381s
fi-bsw-n3050     total:285  pass:239  dwarn:0   dfail:0   fail:0   skip:46  time:542s
fi-bwr-2160      total:285  pass:180  dwarn:0   dfail:0   fail:0   skip:105 time:296s
fi-bxt-dsi       total:285  pass:255  dwarn:0   dfail:0   fail:0   skip:30  time:512s
fi-bxt-j4205     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:513s
fi-byt-j1900     total:285  pass:250  dwarn:0   dfail:0   fail:0   skip:35  time:518s
fi-byt-n2820     total:285  pass:246  dwarn:0   dfail:0   fail:0   skip:39  time:499s
fi-cfl-8700k     total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:410s
fi-cfl-s2        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:581s
fi-cfl-u         total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:509s
fi-cnl-drrs      total:285  pass:254  dwarn:3   dfail:0   fail:0   skip:28  time:522s
fi-elk-e7500     total:285  pass:225  dwarn:1   dfail:0   fail:0   skip:59  time:426s
fi-gdg-551       total:285  pass:176  dwarn:0   dfail:0   fail:1   skip:108 time:319s
fi-glk-1         total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:538s
fi-hsw-4770      total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:404s
fi-ilk-650       total:285  pass:225  dwarn:0   dfail:0   fail:0   skip:60  time:421s
fi-ivb-3520m     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:470s
fi-ivb-3770      total:285  pass:252  dwarn:0   dfail:0   fail:0   skip:33  time:428s
fi-kbl-7500u     total:285  pass:260  dwarn:1   dfail:0   fail:0   skip:24  time:474s
fi-kbl-7567u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:470s
fi-kbl-r         total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:512s
fi-pnv-d510      total:285  pass:219  dwarn:1   dfail:0   fail:0   skip:65  time:661s
fi-skl-6260u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:441s
fi-skl-6600u     total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:535s
fi-skl-6700hq    total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:541s
fi-skl-6700k2    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:507s
fi-skl-6770hq    total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:508s
fi-skl-guc       total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:429s
fi-snb-2520m     total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:581s
fi-snb-2600      total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:401s

9d737cebc219c821989021a3115424165ff7b052 drm-tip: 2018y-03m-20d-14h-56m-05s UTC integration manifest f61c5df8f12d drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8420/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#7 lore raw

✓ Fi.CI.BAT: success for drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection (rev2)

In reply to Oscar Mateo
== Series Details ==

== Series Details ==

Series: drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection (rev2)
URL : https://patchwork.freedesktop.org/series/40315/
State : success

== Summary ==

Series 40315v2 drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection
https://patchwork.freedesktop.org/api/1.0/series/40315/revisions/2/mbox/

---- Possible new issues:

Test kms_pipe_crc_basic:

        Subgroup suspend-read-crc-pipe-a:
                incomplete -> PASS       (fi-cfl-s2)

---- Known issues:

Test debugfs_test:

        Subgroup read_all_entries:
                pass       -> INCOMPLETE (fi-snb-2520m) fdo#103713

fdo#103713 https://bugs.freedesktop.org/show_bug.cgi?id=103713

fi-bdw-5557u     total:285  pass:264  dwarn:0   dfail:0   fail:0   skip:21  time:432s
fi-bdw-gvtdvm    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:442s
fi-blb-e6850     total:285  pass:220  dwarn:1   dfail:0   fail:0   skip:64  time:379s
fi-bsw-n3050     total:285  pass:239  dwarn:0   dfail:0   fail:0   skip:46  time:534s
fi-bwr-2160      total:285  pass:180  dwarn:0   dfail:0   fail:0   skip:105 time:298s
fi-bxt-dsi       total:285  pass:255  dwarn:0   dfail:0   fail:0   skip:30  time:511s
fi-bxt-j4205     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:512s
fi-byt-j1900     total:285  pass:250  dwarn:0   dfail:0   fail:0   skip:35  time:518s
fi-byt-n2820     total:285  pass:246  dwarn:0   dfail:0   fail:0   skip:39  time:503s
fi-cfl-8700k     total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:411s
fi-cfl-s2        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:580s
fi-cfl-u         total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:511s
fi-cnl-drrs      total:285  pass:254  dwarn:3   dfail:0   fail:0   skip:28  time:530s
fi-elk-e7500     total:285  pass:225  dwarn:1   dfail:0   fail:0   skip:59  time:428s
fi-gdg-551       total:285  pass:177  dwarn:0   dfail:0   fail:0   skip:108 time:317s
fi-glk-1         total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:539s
fi-hsw-4770      total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:403s
fi-ilk-650       total:285  pass:225  dwarn:0   dfail:0   fail:0   skip:60  time:415s
fi-ivb-3520m     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:467s
fi-ivb-3770      total:285  pass:252  dwarn:0   dfail:0   fail:0   skip:33  time:430s
fi-kbl-7500u     total:285  pass:260  dwarn:1   dfail:0   fail:0   skip:24  time:482s
fi-kbl-7567u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:467s
fi-kbl-r         total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:514s
fi-pnv-d510      total:285  pass:219  dwarn:1   dfail:0   fail:0   skip:65  time:656s
fi-skl-6260u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:439s
fi-skl-6600u     total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:541s
fi-skl-6700hq    total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:538s
fi-skl-6700k2    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:497s
fi-skl-6770hq    total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:489s
fi-skl-guc       total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:431s
fi-snb-2520m     total:3    pass:2    dwarn:0   dfail:0   fail:0   skip:0  
fi-snb-2600      total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:402s

9d737cebc219c821989021a3115424165ff7b052 drm-tip: 2018y-03m-20d-14h-56m-05s UTC integration manifest 34e5dd440841 drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8422/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

#8 lore raw

✓ Fi.CI.IGT: success for drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection (rev2)

In reply to Oscar Mateo
== Series Details ==

== Series Details ==

Series: drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detection (rev2)
URL : https://patchwork.freedesktop.org/series/40315/
State : success

== Summary ==

---- Known issues:

Test kms_flip:

        Subgroup 2x-flip-vs-expired-vblank:
                pass       -> FAIL       (shard-hsw) fdo#102887
Test kms_setmode:
        Subgroup basic:
                pass       -> FAIL       (shard-apl) fdo#99912
Test kms_vblank:
        Subgroup pipe-b-ts-continuation-dpms-suspend:
                incomplete -> PASS       (shard-hsw) fdo#105054
        Subgroup pipe-b-ts-continuation-suspend:
                pass       -> SKIP       (shard-snb) fdo#105411

fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#105054 https://bugs.freedesktop.org/show_bug.cgi?id=105054
fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411

shard-apl        total:3478 pass:1814 dwarn:1   dfail:0   fail:7   skip:1655 time:13003s
shard-hsw        total:3478 pass:1767 dwarn:1   dfail:0   fail:2   skip:1707 time:11765s
shard-snb        total:3478 pass:1357 dwarn:1   dfail:0   fail:2   skip:2118 time:7270s

Blacklisted hosts:
shard-kbl total:3478 pass:1936 dwarn:1 dfail:0 fail:10 skip:1531 time:9977s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8422/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx