Skip to contentSkip to conversation

Patch "dt-bindings: display: sun4i: Add allwinner,tcon-channel property" has been added to the 4.9-stable tree

PATCH [email protected] 1 participant 1 message Apr 9, 2018

Subsystems (5)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

dt-bindings: display: sun4i: Add allwinner,tcon-channel property

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
dt-bindings-display-sun4i-add-allwinner-tcon-channel-property.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From foo@baz Mon Apr 9 17:09:24 CEST 2018

From: Maxime Ripard <[email protected]>
Date: Sat, 27 May 2017 18:09:34 +0200
Subject: dt-bindings: display: sun4i: Add allwinner,tcon-channel property

From: Maxime Ripard <[email protected]>

[ Upstream commit 22662f12768f971809b478386d9cc4947d00497a ]

The Allwinner Timings Controller has two, mutually exclusive, channels. When the binding has been introduced, it was assumed that there would be only a single user per channel in the system.

While this is likely for the channel 0 which only connects to LCD displays, it turns out that the channel 1 can be connected to multiple controllers in the SoC (HDMI and TV encoders for example). And while the simultaneous use of HDMI and TV outputs cannot be achieved, switching from one to the other at runtime definitely sounds plausible.

Add an extra property, allwinner,tcon-channel, to specify for a given endpoint which TCON channel it is connected to, while falling back to the previous mechanism if that property is missing.

---
 Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt |   11 ++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +7 -4
@@ -47,10 +47,13 @@ Required properties:
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
   first port should be the input endpoint, the second one the output
 
-  The output should have two endpoints. The first is the block
-  connected to the TCON channel 0 (usually a panel or a bridge), the
-  second the block connected to the TCON channel 1 (usually the TV
-  encoder)
+  The output may have multiple endpoints. The TCON has two channels,
+  usually with the first channel being used for the panels interfaces
+  (RGB, LVDS, etc.), and the second being used for the outputs that
+  require another controller (TV Encoder, HDMI, etc.). The endpoints
+  will take an extra property, allwinner,tcon-channel, to specify the
+  channel the endpoint is associated to. If that property is not
+  present, the endpoint number will be used as the channel number.
 
 On SoCs other than the A33, there is one more clock required:
    - 'tcon-ch1': The clock driving the TCON channel 1

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/dt-bindings-display-sun4i-add-allwinner-tcon-channel-property.patch queue-4.9/drm-sun4i-ignore-the-generic-connectors-for-components.patch