Skip to contentSkip to conversation

Patch "HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices" has been added to the 4.9-stable tree

PATCH [email protected] 1 participant 1 message Apr 9, 2018

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
hid-i2c-call-acpi_device_fix_up_power-for-acpi-enumerated-devices.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From foo@baz Mon Apr 9 17:09:24 CEST 2018

From: Hans de Goede <[email protected]>
Date: Tue, 9 May 2017 10:04:36 +0200
Subject: HID: i2c: Call acpi_device_fix_up_power for ACPI-enumerated devices

From: Hans de Goede <[email protected]>

[ Upstream commit f3d3eab667de62572376abb1aa26316191c39929 ]

For ACPI devices which do not have a _PSC method, the ACPI subsys cannot query their initial state at boot, so these devices are assumed to have been put in D0 by the BIOS, but for touchscreens that is not always true.

This commit adds a call to acpi_device_fix_up_power to explicitly put devices without a _PSC method into D0 state (for devices with a _PSC method it is a nop). Note we only need to do this on probe, after a resume the ACPI subsys knows the device is in D3 and will properly put it in D0.

This fixes the SIS0817 i2c-hid touchscreen on a Peaq C1010 2-in-1 device failing to probe with a "hid_descr_cmd failed" error.

---
 drivers/hid/i2c-hid/i2c-hid.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/hid/i2c-hid/i2c-hid.c +13 -0
@@ -968,6 +968,15 @@ static int i2c_hid_acpi_pdata(struct i2c
 	return ret < 0 && ret != -ENXIO ? ret : 0;
 }
 
+static void i2c_hid_acpi_fix_up_power(struct device *dev)
+{
+	acpi_handle handle = ACPI_HANDLE(dev);
+	struct acpi_device *adev;
+
+	if (handle && acpi_bus_get_device(handle, &adev) == 0)
+		acpi_device_fix_up_power(adev);
+}
+
 static const struct acpi_device_id i2c_hid_acpi_match[] = {
 	{"ACPI0C50", 0 },
 	{"PNP0C50", 0 },
@@ -980,6 +989,8 @@ static inline int i2c_hid_acpi_pdata(str
 {
 	return -ENODEV;
 }
+
+static inline void i2c_hid_acpi_fix_up_power(struct device *dev) {}
 #endif
 
 #ifdef CONFIG_OF
@@ -1082,6 +1093,8 @@ static int i2c_hid_probe(struct i2c_clie
 	if (ret < 0)
 		goto err;
 
+	i2c_hid_acpi_fix_up_power(&client->dev);
+
 	pm_runtime_get_noresume(&client->dev);
 	pm_runtime_set_active(&client->dev);
 	pm_runtime_enable(&client->dev);

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/gpio-crystalcove-do-not-write-regular-gpio-registers-for-virtual-gpios.patch queue-4.9/acpi-video-default-lcd_only-to-true-on-win8-ready-and-newer-machines.patch queue-4.9/hid-i2c-call-acpi_device_fix_up_power-for-acpi-enumerated-devices.patch queue-4.9/ata-libahci-properly-propagate-return-value-of-platform_get_irq.patch queue-4.9/input-goodix-disable-irqs-while-suspended.patch queue-4.9/asoc-intel-cht_bsw_rt5645-analog-mic-support.patch queue-4.9/pinctrl-baytrail-enable-glitch-filter-for-gpios-used-as-interrupts.patch