Skip to contentSkip to conversation

Patch "qed: Fix overriding of supported autoneg value." has been added to the 4.9-stable tree

PATCH [email protected] 1 participant 1 message Apr 9, 2018

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

qed: Fix overriding of supported autoneg value.

to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
qed-fix-overriding-of-supported-autoneg-value.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From foo@baz Mon Apr 9 17:09:24 CEST 2018

From: "[email protected]" <[email protected]>
Date: Thu, 4 May 2017 08:15:04 -0700
Subject: qed: Fix overriding of supported autoneg value.

From: "[email protected]" <[email protected]>

[ Upstream commit 34f9199ce7b7e5c641b96e928bd60e086bf7f278 ]

Driver currently uses advertised-autoneg value to populate the supported-autoneg field. When advertised field is updated, user gets the same value for supported field. Supported-autoneg value need to be populated from the link capabilities value returned by the MFW.

---
 drivers/net/ethernet/qlogic/qed/qed_dev.c  |    3 +++
 drivers/net/ethernet/qlogic/qed/qed_main.c |    6 +++++-
 drivers/net/ethernet/qlogic/qed/qed_mcp.h  |    1 +
 3 files changed, 9 insertions(+), 1 deletion(-)
drivers/net/ethernet/qlogic/qed/qed_dev.c +3 -0
@@ -1628,6 +1628,9 @@ static int qed_hw_get_nvm_info(struct qe
 		DP_NOTICE(p_hwfn, "Unknown Speed in 0x%08x\n", link_temp);
 	}
 
+	p_hwfn->mcp_info->link_capabilities.default_speed_autoneg =
+		link->speed.autoneg;
+
 	link_temp &= NVM_CFG1_PORT_DRV_FLOW_CONTROL_MASK;
 	link_temp >>= NVM_CFG1_PORT_DRV_FLOW_CONTROL_OFFSET;
 	link->pause.autoneg = !!(link_temp &
drivers/net/ethernet/qlogic/qed/qed_main.c +5 -1
@@ -1240,7 +1240,7 @@ static void qed_fill_link(struct qed_hwf
 
 	/* TODO - at the moment assume supported and advertised speed equal */
 	if_link->supported_caps = QED_LM_FIBRE_BIT;
-	if (params.speed.autoneg)
+	if (link_caps.default_speed_autoneg)
 		if_link->supported_caps |= QED_LM_Autoneg_BIT;
 	if (params.pause.autoneg ||
 	    (params.pause.forced_rx && params.pause.forced_tx))
@@ -1250,6 +1250,10 @@ static void qed_fill_link(struct qed_hwf
 		if_link->supported_caps |= QED_LM_Pause_BIT;
 
 	if_link->advertised_caps = if_link->supported_caps;
+	if (params.speed.autoneg)
+		if_link->advertised_caps |= QED_LM_Autoneg_BIT;
+	else
+		if_link->advertised_caps &= ~QED_LM_Autoneg_BIT;
 	if (params.speed.advertised_speeds &
 	    NVM_CFG1_PORT_DRV_SPEED_CAPABILITY_MASK_1G)
 		if_link->advertised_caps |= QED_LM_1000baseT_Half_BIT |
drivers/net/ethernet/qlogic/qed/qed_mcp.h +1 -0
@@ -35,6 +35,7 @@ struct qed_mcp_link_params {
 
 struct qed_mcp_link_capabilities {
 	u32 speed_capabilities;
+	bool default_speed_autoneg;
 };
 
 struct qed_mcp_link_state {

Patches currently in stable-queue which might be from [email protected] are

queue-4.9/qed-fix-overriding-of-supported-autoneg-value.patch