Skip to contentSkip to conversation

Patch "serial: sh-sci: Fix race condition causing garbage during shutdown" has been added to the 4.4-stable tree

PATCH [email protected] 1 participant 1 message Apr 10, 2018

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

serial: sh-sci: Fix race condition causing garbage during shutdown

to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From foo@baz Tue Apr 10 10:31:53 CEST 2018

From: Geert Uytterhoeven <[email protected]>
Date: Tue, 25 Apr 2017 20:15:35 +0200
Subject: serial: sh-sci: Fix race condition causing garbage during shutdown

From: Geert Uytterhoeven <[email protected]>

[ Upstream commit 1cf4a7efdc71cab84c42cfea7200608711ea954f ]

If DMA is enabled and used, a burst of old data may be seen on the serial console during "poweroff" or "reboot". uart_flush_buffer() clears the circular buffer, but sci_port.tx_dma_len is not reset. This leads to a circular buffer overflow, dumping (UART_XMIT_SIZE - sci_port.tx_dma_len) bytes.

To fix this, add a .flush_buffer() callback that resets sci_port.tx_dma_len.

Inspired by commit 31ca2c63fdc0aee7 ("tty/serial: atmel: fix race condition (TX+DMA)").

---
 drivers/tty/serial/sh-sci.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
drivers/tty/serial/sh-sci.c +14 -2
@@ -1457,7 +1457,16 @@ static void sci_free_dma(struct uart_por
 	if (s->chan_rx)
 		sci_rx_dma_release(s, false);
 }
-#else
+
+static void sci_flush_buffer(struct uart_port *port)
+{
+	/*
+	 * In uart_flush_buffer(), the xmit circular buffer has just been
+	 * cleared, so we have to reset tx_dma_len accordingly.
+	 */
+	to_sci_port(port)->tx_dma_len = 0;
+}
+#else /* !CONFIG_SERIAL_SH_SCI_DMA */
 static inline void sci_request_dma(struct uart_port *port)
 {
 }
@@ -1465,7 +1474,9 @@ static inline void sci_request_dma(struc
 static inline void sci_free_dma(struct uart_port *port)
 {
 }
-#endif
+
+#define sci_flush_buffer	NULL
+#endif /* !CONFIG_SERIAL_SH_SCI_DMA */
 
 static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
 {
@@ -2205,6 +2216,7 @@ static struct uart_ops sci_uart_ops = {
 	.break_ctl	= sci_break_ctl,
 	.startup	= sci_startup,
 	.shutdown	= sci_shutdown,
+	.flush_buffer	= sci_flush_buffer,
 	.set_termios	= sci_set_termios,
 	.pm		= sci_pm,
 	.type		= sci_type,

Patches currently in stable-queue which might be from [email protected] are

queue-4.4/serial-sh-sci-fix-race-condition-causing-garbage-during-shutdown.patch queue-4.4/sh_eth-use-platform-device-for-printing-before-register_netdev.patch