FAILED: patch "[PATCH] mmc: core: Disable HPI for certain Micron (Numonyx) eMMC" failed to apply to 4.16-stable tree

The patch below does not apply to the 4.16-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From: Dirk Behme <[email protected]>
Date: Wed, 14 Mar 2018 14:50:09 +0000
Subject: [PATCH] mmc: core: Disable HPI for certain Micron (Numonyx) eMMC
cards

Certain Micron eMMC v4.5 cards might get broken when HPI feature is used and hence this patch disables the HPI feature for such buggy cards.

In U-Boot, these cards are reported as

Manufacturer: Micron (ID: 0xFE)
OEM: 0x4E
Name: MMC32G
Revision: 19 (0x13)
Serial: 959241022 Manufact. date: 8/2015 (0x82) CRC: 0x00 Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.5
High Capacity: Yes
Capacity: 29.1 GiB
Boot Partition Size: 16 MiB
Bus Width: 8-bit

According to JEDEC JEP106 manufacturer 0xFE is Numonyx, which was bought by Micron.

index 79a5b985ccf5..9c821eedd156 100644
@@ -82,6 +82,7 @@ struct mmc_fixup {
 #define CID_MANFID_APACER       0x27
 #define CID_MANFID_KINGSTON     0x70
 #define CID_MANFID_HYNIX	0x90
+#define CID_MANFID_NUMONYX	0xFE
 
 #define END_FIXUP { NULL }
 

index 75d317623852..5153577754f0 100644
@@ -109,6 +109,12 @@ static const struct mmc_fixup mmc_ext_csd_fixups[] = {
 	 */
 	MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_HYNIX,
 			      0x014a, add_quirk, MMC_QUIRK_BROKEN_HPI, 5),
+	/*
+	 * Certain Micron (Numonyx) eMMC 4.5 cards might get broken when HPI
+	 * feature is used so disable the HPI feature for such buggy cards.
+	 */
+	MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_NUMONYX,
+			      0x014e, add_quirk, MMC_QUIRK_BROKEN_HPI, 6),
 
 	END_FIXUP
 };