drm/arm/malidp: Enhance support for system and runtime power management on malidp.
Subsystems (3)
v2 cover drm/arm/malidp: Enhance support for system and runtime power management on malidp.
This patch series enhances and fixes certain issues relevant to system and runtime power management on malidp.
---
Changes in v2:
- Removed the change ids and modified some commit messages
---
Ayan Kumar Halder (8):
drm/arm/malidp: Modified the prototype of malidp_de_irq_fini drm/arm/malidp: Modified the prototype of malidp_se_irq_fini drm/arm/malidp: Split malidp_de_irq_init drm/arm/malidp: Split malidp_se_irq_init drm/arm/malidp: Enable/disable interrupts in runtime pm drm/arm/malidp: Enable/disable the scaling engine interrupts with
memory writeback
drm/arm/malidp: Set the output_depth register in modeset drm/arm/malidp: Added the late system pm functions
drivers/gpu/drm/arm/malidp_drv.c | 33 ++++++++++++++++++++---- drivers/gpu/drm/arm/malidp_hw.c | 55 +++++++++++++++++++++++++++------------- drivers/gpu/drm/arm/malidp_hw.h | 6 +++-- 3 files changed, 70 insertions(+), 24 deletions(-)
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 1/8 drm/arm/malidp: Modified the prototype of malidp_de_irq_fini
'struct drm_device' is being replaced with 'struct malidp_hw_device' as the function argument. The reason being the dependency of malidp_de_irq_fini on 'struct drm_device' needs to be removed so as to enable it to call from functions which receives 'struct malidp_hw_device' as argument. Furthermore, there is no way to retrieve 'struct drm_device' from 'struct malidp_hw_device'.
---
Changes in v2:-
- Removed the change id
--- drivers/gpu/drm/arm/malidp_drv.c | 9 ++++++--- drivers/gpu/drm/arm/malidp_hw.c | 5 +---- drivers/gpu/drm/arm/malidp_hw.h | 2 +- 3 files changed, 8 insertions(+), 8 deletions(-)
drivers/gpu/drm/arm/malidp_drv.c +6 -3
@@ -295,6 +295,8 @@ static int malidp_irq_init(struct platform_device *pdev) {int irq_de, irq_se, ret =0 ;struct drm_device *drm =dev_get_drvdata (&pdev->dev); +struct malidp_drm *malidp = drm->dev_private; +struct malidp_hw_device *hwdev = malidp->dev;/* fetch the interrupts from DT */ irq_de =platform_get_irq_byname (pdev,"DE" );
@@ -314,7 +316,7 @@ static int malidp_irq_init(struct platform_device *pdev) ret =malidp_se_irq_init (drm, irq_se);if (ret) { -malidp_de_irq_fini (drm); +malidp_de_irq_fini (hwdev);return ret; }
@@ -652,7 +654,7 @@ static int malidp_bind(struct device *dev)pm_runtime_get_sync (dev); vblank_fail:malidp_se_irq_fini (drm); -malidp_de_irq_fini (drm); +malidp_de_irq_fini (hwdev); drm->irq_enabled = false; irq_init_fail:component_unbind_all (dev, drm);
@@ -681,6 +683,7 @@ static void malidp_unbind(struct device *dev) {struct drm_device *drm =dev_get_drvdata (dev);struct malidp_drm *malidp = drm->dev_private; +struct malidp_hw_device *hwdev = malidp->dev;drm_dev_unregister (drm);drm_fb_cma_fbdev_fini (drm);
@@ -688,7 +691,7 @@ static void malidp_unbind(struct device *dev)pm_runtime_get_sync (dev);drm_crtc_vblank_off (&malidp->crtc);malidp_se_irq_fini (drm); -malidp_de_irq_fini (drm); +malidp_de_irq_fini (hwdev); drm->irq_enabled = false;component_unbind_all (dev, drm);of_node_put (malidp->crtc.port);
drivers/gpu/drm/arm/malidp_hw.c +1 -4
@@ -900,11 +900,8 @@ int malidp_de_irq_init(struct drm_device *drm, int irq)return 0 ; } -void malidp_de_irq_fini (struct drm_device *drm) +void malidp_de_irq_fini (struct malidp_hw_device *hwdev) { -struct malidp_drm *malidp = drm->dev_private; -struct malidp_hw_device *hwdev = malidp->dev; -malidp_hw_disable_irq (hwdev,MALIDP_DE_BLOCK , hwdev->hw->map.de_irq_map.irq_mask); malidp_hw_disable_irq(hwdev, MALIDP_DC_BLOCK,
drivers/gpu/drm/arm/malidp_hw.h +1 -1
@@ -297,7 +297,7 @@ static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev, }int malidp_de_irq_init (struct drm_device *drm,int irq); -void malidp_de_irq_fini (struct drm_device *drm); +void malidp_de_irq_fini (struct malidp_hw_device *hwdev);int malidp_se_irq_init (struct drm_device *drm,int irq);void malidp_se_irq_fini (struct drm_device *drm);
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 2/8 drm/arm/malidp: Modified the prototype of malidp_se_irq_fini
In reply to Ayan Kumar Halder'struct drm_device' is being replaced with 'struct malidp_hw_device' as the function argument.The reason being the dependency of malidp_se_irq_fini on 'struct drm_device' needs to be removed so as to enable it to call from functions which receives 'struct malidp_hw_device' as argument. Furthermore, there is no way to retrieve 'struct drm_device' from 'struct malidp_hw_device'
---
Changes in v2:-
- Removed the change id
--- drivers/gpu/drm/arm/malidp_drv.c | 4 ++-- drivers/gpu/drm/arm/malidp_hw.c | 5 +---- drivers/gpu/drm/arm/malidp_hw.h | 2 +- 3 files changed, 4 insertions(+), 7 deletions(-)
drivers/gpu/drm/arm/malidp_drv.c +2 -2
@@ -653,7 +653,7 @@ static int malidp_bind(struct device *dev) fbdev_fail:pm_runtime_get_sync (dev); vblank_fail: -malidp_se_irq_fini (drm); +malidp_se_irq_fini (hwdev);malidp_de_irq_fini (hwdev); drm->irq_enabled = false; irq_init_fail:
@@ -690,7 +690,7 @@ static void malidp_unbind(struct device *dev)drm_kms_helper_poll_fini (drm);pm_runtime_get_sync (dev);drm_crtc_vblank_off (&malidp->crtc); -malidp_se_irq_fini (drm); +malidp_se_irq_fini (hwdev);malidp_de_irq_fini (hwdev); drm->irq_enabled = false;component_unbind_all (dev, drm);
drivers/gpu/drm/arm/malidp_hw.c +1 -4
@@ -970,11 +970,8 @@ int malidp_se_irq_init(struct drm_device *drm, int irq)return 0 ; } -void malidp_se_irq_fini (struct drm_device *drm) +void malidp_se_irq_fini (struct malidp_hw_device *hwdev) { -struct malidp_drm *malidp = drm->dev_private; -struct malidp_hw_device *hwdev = malidp->dev; -malidp_hw_disable_irq (hwdev,MALIDP_SE_BLOCK , hwdev->hw->map.se_irq_map.irq_mask); }
drivers/gpu/drm/arm/malidp_hw.h +1 -1
@@ -299,7 +299,7 @@ static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,int malidp_de_irq_init (struct drm_device *drm,int irq);void malidp_de_irq_fini (struct malidp_hw_device *hwdev);int malidp_se_irq_init (struct drm_device *drm,int irq); -void malidp_se_irq_fini (struct drm_device *drm); +void malidp_se_irq_fini (struct malidp_hw_device *hwdev);u8 malidp_hw_get_format_id (const struct malidp_hw_regmap *map,u8 layer_id,u32 format);
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 3/8 drm/arm/malidp: Split malidp_de_irq_init
In reply to Ayan Kumar HalderExtract the hardware initialisation part from malidp_de_irq_init() into the malidp_de_irq_hw_init() which will be later invoked from runtime_pm_resume function when it needs to re-enable the interrupts.
---
Changes in v2:-
- Removed the change id
--- drivers/gpu/drm/arm/malidp_hw.c | 25 ++++++++++++++++++------- drivers/gpu/drm/arm/malidp_hw.h | 1 + 2 files changed, 19 insertions(+), 7 deletions(-)
drivers/gpu/drm/arm/malidp_hw.c +18 -7
@@ -869,6 +869,23 @@ static irqreturn_t malidp_de_irq_thread_handler(int irq, void *arg)return IRQ_HANDLED ; } +void malidp_de_irq_hw_init (struct malidp_hw_device *hwdev) +{ +/* ensure interrupts are disabled */ +malidp_hw_disable_irq (hwdev,MALIDP_DE_BLOCK ,0xffffffff ); +malidp_hw_clear_irq (hwdev,MALIDP_DE_BLOCK ,0xffffffff ); +malidp_hw_disable_irq (hwdev,MALIDP_DC_BLOCK ,0xffffffff ); +malidp_hw_clear_irq (hwdev,MALIDP_DC_BLOCK ,0xffffffff ); + +/* first enable the DC block IRQs */ +malidp_hw_enable_irq (hwdev,MALIDP_DC_BLOCK , + hwdev->hw->map.dc_irq_map.irq_mask); + +/* now enable the DE block IRQs */ +malidp_hw_enable_irq (hwdev,MALIDP_DE_BLOCK , + hwdev->hw->map.de_irq_map.irq_mask); +} +int malidp_de_irq_init (struct drm_device *drm,int irq) {struct malidp_drm *malidp = drm->dev_private;
@@ -889,13 +906,7 @@ int malidp_de_irq_init(struct drm_device *drm, int irq)return ret; } -/* first enable the DC block IRQs */ -malidp_hw_enable_irq (hwdev,MALIDP_DC_BLOCK , - hwdev->hw->map.dc_irq_map.irq_mask); - -/* now enable the DE block IRQs */ -malidp_hw_enable_irq (hwdev,MALIDP_DE_BLOCK , - hwdev->hw->map.de_irq_map.irq_mask); +malidp_de_irq_hw_init (hwdev);return 0 ; }
drivers/gpu/drm/arm/malidp_hw.h +1 -0
@@ -297,6 +297,7 @@ static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev, }int malidp_de_irq_init (struct drm_device *drm,int irq); +void malidp_de_irq_hw_init (struct malidp_hw_device *hwdev);void malidp_de_irq_fini (struct malidp_hw_device *hwdev);int malidp_se_irq_init (struct drm_device *drm,int irq);void malidp_se_irq_fini (struct malidp_hw_device *hwdev);
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 4/8 drm/arm/malidp: Split malidp_se_irq_init
In reply to Ayan Kumar HalderExtract the hardware initialisation part from malidp_se_irq_init() into the malidp_se_irq_hw_init() which will be later invoked from malidpxxx_enable_memwrite() when it needs to re-enable the interrupts.
---
Changes in v2:-
- Removed the change id
--- drivers/gpu/drm/arm/malidp_hw.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
drivers/gpu/drm/arm/malidp_hw.c +12 -2
@@ -163,6 +163,7 @@ static const u16 dp500_se_scaling_coeffs[][SE_N_SCALING_COEFFS] = { };#define MALIDP_DE_DEFAULT_PREFETCH_START 5 +static void malidp_se_irq_hw_init (struct malidp_hw_device *hwdev);static int malidp500_query_hw (struct malidp_hw_device *hwdev) {
@@ -952,6 +953,16 @@ static irqreturn_t malidp_se_irq(int irq, void *arg)return IRQ_HANDLED ; } +static void malidp_se_irq_hw_init (struct malidp_hw_device *hwdev) +{ +/* ensure interrupts are disabled */ +malidp_hw_disable_irq (hwdev,MALIDP_SE_BLOCK ,0xffffffff ); +malidp_hw_clear_irq (hwdev,MALIDP_SE_BLOCK ,0xffffffff ); + +malidp_hw_enable_irq (hwdev,MALIDP_SE_BLOCK , + hwdev->hw->map.se_irq_map.irq_mask); +} +static irqreturn_t malidp_se_irq_thread_handler (int irq,void *arg) {return IRQ_HANDLED ;
@@ -975,8 +986,7 @@ int malidp_se_irq_init(struct drm_device *drm, int irq)return ret; } -malidp_hw_enable_irq (hwdev,MALIDP_SE_BLOCK , - hwdev->hw->map.se_irq_map.irq_mask); +malidp_se_irq_hw_init (hwdev);return 0 ; }
Signature · 1 line
2.7.4
PATCH v2 5/8 drm/arm/malidp: Enable/disable interrupts in runtime pm
In reply to Ayan Kumar HalderDisplay engine and core interrupts need to be disabled when the system invokes malidp_runtime_pm_suspend. Consequently, they need to be enabled in malidp_runtime_pm_resume.
---
Changes in v2:-
- Removed the change id
--- drivers/gpu/drm/arm/malidp_drv.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/arm/malidp_drv.c +2 -0
@@ -470,6 +470,7 @@ static int malidp_runtime_pm_suspend(struct device *dev)/* we can only suspend if the hardware is in config mode */ WARN_ON (!hwdev->hw->in_config_mode (hwdev)); +malidp_de_irq_fini (hwdev); hwdev->pm_suspended = true;clk_disable_unprepare (hwdev->mclk);clk_disable_unprepare (hwdev->aclk);
@@ -488,6 +489,7 @@ static int malidp_runtime_pm_resume(struct device *dev)clk_prepare_enable (hwdev->aclk);clk_prepare_enable (hwdev->mclk); hwdev->pm_suspended = false; +malidp_de_irq_hw_init (hwdev);return 0 ; }
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 6/8 drm/arm/malidp: Enable/disable the scaling engine interrupts with memory writeback
In reply to Ayan Kumar HalderScaling engine interrupts need to be enabled/disabled as and when memwrite is enabled and disabled. The reason being scaling engine interrupts are used only by the memory writeout layer.
This patch depends on:
https://lkml.org/lkml/2017/5/15/695
---
Changes in v2:-
- Removed the change id and modified the commit message
--- drivers/gpu/drm/arm/malidp_hw.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/arm/malidp_hw.c +2 -0
@@ -621,12 +621,14 @@ static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev,malidp_hw_setbits (hwdev,MALIDP550_SE_MEMWRITE_ONESHOT |MALIDP_SE_MEMWRITE_EN ,MALIDP550_SE_CONTROL ); +malidp_se_irq_hw_init (hwdev);return 0 ; }static void malidp550_disable_memwrite (struct malidp_hw_device *hwdev) {u32 base =malidp_get_block_base (hwdev,MALIDP_DE_BLOCK ); +malidp_se_irq_fini (hwdev);malidp_hw_clearbits (hwdev,MALIDP550_SE_MEMWRITE_ONESHOT |MALIDP_SE_MEMWRITE_EN ,MALIDP550_SE_CONTROL );malidp_hw_clearbits (hwdev,MALIDP_SCALE_ENGINE_EN , base +MALIDP_DE_DISPLAY_FUNC );
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Liviu Dudau
maintainerRe: [PATCH v2 6/8] drm/arm/malidp: Enable/disable the scaling engine interrupts with memory writeback
Quoted 25 lines · Ayan Kumar Halder
Scaling engine interrupts need to be enabled/disabled as and when memwrite is enabled and disabled. The reason being scaling engine interrupts are used only by the memory writeout layer.
This patch depends on:
https://lkml.org/lkml/2017/5/15/695Signed-off-by Ayan Kumar Halder <[email protected]>---
Changes in v2:-
- Removed the change id and modified the commit message--- drivers/gpu/drm/arm/malidp_hw.c | 2 ++ 1 file changed, 2 insertions(+)drivers/gpu/drm/arm/malidp_hw.c +1
-0@@ -621,12 +621,14 @@ static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev,malidp_hw_setbits (hwdev,MALIDP550_SE_MEMWRITE_ONESHOT |MALIDP_SE_MEMWRITE_EN ,MALIDP550_SE_CONTROL ); +malidp_se_irq_hw_init (hwdev);
drivers/gpu/drm/arm/malidp_hw.c static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev, · line 634
Quoted 10 lines
drivers/gpu/drm/arm/malidp_hw.c +1
-0return 0 ; }static void malidp550_disable_memwrite (struct malidp_hw_device *hwdev) {u32 base =malidp_get_block_base (hwdev,MALIDP_DE_BLOCK ); +malidp_se_irq_fini (hwdev);malidp_hw_clearbits (hwdev,MALIDP550_SE_MEMWRITE_ONESHOT |MALIDP_SE_MEMWRITE_EN ,MALIDP550_SE_CONTROL );malidp_hw_clearbits (hwdev,MALIDP_SCALE_ENGINE_EN , base +MALIDP_DE_DISPLAY_FUNC );
We now know that this patch is broken, because it disables interrupts for the writeback after a previous commit has enabled them but before the writeback engine has finished writing, so the better place for enabling and disabling the SE IRQs is in the malidp_pm_{suspend,resume} functions, not here.
Only for this patch: NACK.
Best regards,
Liviu
Quoted 3 lines
Signature · 1 line
2.7.4
Signature · 8 lines
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯Re: [PATCH v2 6/8] drm/arm/malidp: Enable/disable the scaling engine interrupts with memory writeback
Hi Liviu,
Quoted 29 lines · Liviu Dudau
Quoted 28 lines · Ayan Kumar Halder
Scaling engine interrupts need to be enabled/disabled as and when memwrite is enabled and disabled. The reason being scaling engine interrupts are used only by the memory writeout layer.
This patch depends on:
https://lkml.org/lkml/2017/5/15/695Signed-off-by Ayan Kumar Halder <[email protected]>---
Changes in v2:-
- Removed the change id and modified the commit message--- drivers/gpu/drm/arm/malidp_hw.c | 2 ++ 1 file changed, 2 insertions(+)drivers/gpu/drm/arm/malidp_hw.c +1
-0@@ -621,12 +621,14 @@ static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev,malidp_hw_setbits (hwdev,MALIDP550_SE_MEMWRITE_ONESHOT |MALIDP_SE_MEMWRITE_EN ,MALIDP550_SE_CONTROL ); +malidp_se_irq_hw_init (hwdev);return 0 ; }
Quoted 14 lines
drivers/gpu/drm/arm/malidp_hw.c static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev, · line 634
Quoted 7 lines
drivers/gpu/drm/arm/malidp_hw.c +1
-0static void malidp550_disable_memwrite (struct malidp_hw_device *hwdev) {u32 base =malidp_get_block_base (hwdev,MALIDP_DE_BLOCK ); +malidp_se_irq_fini (hwdev);malidp_hw_clearbits (hwdev,MALIDP550_SE_MEMWRITE_ONESHOT |MALIDP_SE_MEMWRITE_EN ,MALIDP550_SE_CONTROL );malidp_hw_clearbits (hwdev,MALIDP_SCALE_ENGINE_EN , base +MALIDP_DE_DISPLAY_FUNC );We now know that this patch is broken, because it disables interrupts for the writeback after a previous commit has enabled them but before the writeback engine has finished writing, so the better place for enabling and disabling the SE IRQs is in the malidp_pm_{suspend,resume} functions, not here.
Sorry, I missed this issue. I will send an updated v3 patch for this only.
Thanks,
Ayan Kumar Halder
Quoted 18 lines
Only for this patch: NACK.
Best regards,
LiviuQuoted 3 lines
Signature · 1 line
2.7.4Signature · 8 lines
==================== | I would like to | | fix the world, | | but they're not | | giving me the | \ source code! / --------------- ??\_(???)_/??
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 7/8 drm/arm/malidp: Set the output_depth register in modeset
In reply to Ayan Kumar HalderOne needs to store the value of the OUTPUT_DEPTH that one has parsed from device tree, so that it can be restored on system resume. This value is set in the modeset function as this gets reset when the system suspends.
---
Changes in v2:-
- Removed the change id
--- drivers/gpu/drm/arm/malidp_drv.c | 1 + drivers/gpu/drm/arm/malidp_hw.c | 4 ++++ drivers/gpu/drm/arm/malidp_hw.h | 1 + 3 files changed, 6 insertions(+)
drivers/gpu/drm/arm/malidp_drv.c +1 -0
@@ -601,6 +601,7 @@ static int malidp_bind(struct device *dev)for (i =0 ; i <MAX_OUTPUT_CHANNELS ; i++) out_depth = (out_depth <<8 ) | (output_width[i] &0xf );malidp_hw_write (hwdev, out_depth, hwdev->hw->map.out_depth_base); + hwdev->output_color_depth = out_depth;atomic_set (&malidp->config_valid,0 );init_waitqueue_head (&malidp->wq);
drivers/gpu/drm/arm/malidp_hw.c +4 -0
@@ -234,6 +234,8 @@ static void malidp500_modeset(struct malidp_hw_device *hwdev, struct videomode * {u32 val =0 ; +malidp_hw_write (hwdev, hwdev->output_color_depth, + hwdev->hw->map.out_depth_base);malidp_hw_clearbits (hwdev,MALIDP500_DC_CLEAR_MASK ,MALIDP500_DC_CONTROL );if (mode->flags &DISPLAY_FLAGS_HSYNC_HIGH ) val |=MALIDP500_HSYNCPOL ;
@@ -458,6 +460,8 @@ static void malidp550_modeset(struct malidp_hw_device *hwdev, struct videomode * {u32 val =MALIDP_DE_DEFAULT_PREFETCH_START ; +malidp_hw_write (hwdev, hwdev->output_color_depth, + hwdev->hw->map.out_depth_base);malidp_hw_write (hwdev, val,MALIDP550_DE_CONTROL );/* * Mali-DP550 and Mali-DP650 encode the background color like this:
drivers/gpu/drm/arm/malidp_hw.h +1 -0
@@ -228,6 +228,7 @@ struct malidp_hw_device {u8 min_line_size;u16 max_line_size; +u32 output_color_depth;/* track the device PM state */ bool pm_suspended;
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 8/8 drm/arm/malidp: Added the late system pm functions
In reply to Ayan Kumar Haldermalidp_pm_suspend_late checks if the runtime status is not suspended and if so, invokes malidp_runtime_pm_suspend which disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended.
The difference between suspend() and suspend_late() is as follows:-
1. suspend() makes the device quiescent. In our case, we invoke the DRM helper which disables the CRTC. This would have invoked runtime pm suspend but the system suspend process disables runtime pm.
2. suspend_late() It continues the suspend operations of the drm device which was started by suspend(). In our case, it performs the same functionality as runtime_suspend().
The complimentary functions are resume() and resume_early(). In the case of resume_early(), we invoke malidp_runtime_pm_resume() which enables the clocks and the interrupts. It sets the runtime status as active. If the device was in runtime suspend mode before system suspend was called, pm_runtime_work() will put the device back in runtime suspended mode( after the complete system has been resumed).
---
Changes in v2:-
- Removed the change id and modified the commit message
--- drivers/gpu/drm/arm/malidp_drv.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
drivers/gpu/drm/arm/malidp_drv.c +17 -0
@@ -766,8 +766,25 @@ static int __maybe_unused malidp_pm_resume(struct device *dev)return 0 ; } +static int __maybe_unused malidp_pm_suspend_late (struct device *dev) +{ +if (!pm_runtime_status_suspended (dev)) { +malidp_runtime_pm_suspend (dev); +pm_runtime_set_suspended (dev); + } +return 0 ; +} + +static int __maybe_unused malidp_pm_resume_early (struct device *dev) +{ +malidp_runtime_pm_resume (dev); +pm_runtime_set_active (dev); +return 0 ; +} +static const struct dev_pm_ops malidp_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend, malidp_pm_resume) \ + SET_LATE_SYSTEM_SLEEP_PM_OPS(malidp_pm_suspend_late, malidp_pm_resume_early) \SET_RUNTIME_PM_OPS (malidp_runtime_pm_suspend, malidp_runtime_pm_resume,NULL ) };
Signature · 6 lines
2.7.4 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel