Using LIBIIO sending DATA to DAC and capturing the output from DAC
I would like to ask a question and if anybody can answer my question, I would very much appreciate.
I am using Z706 and AD9361. I have setup the SD card image on the server side and I have a client machine which is a Linux machine. I am using ad9361-iiostream file where I send my data using sin and cos function to DAC and try to get the output from DAC. If I send the random number which does not exceed 2047, do the left shift 4 bit and send the data to DAC. It creates a nice waveform file and the waveform can be seen on oscilloscope clearly. Using random number I can get the output from DAC. However, when I send the sin and cos function, the output from DAC can not be captured or I get just 0 and one single value as output.
I have used iio_channel_read_raw function to capture the output else iio_channel_read function to capture the output from DAC. I want to capture the DAC output and then send the output to ADC and finally I want to capture the ADC output to compare the digital data on both side.
Can any export or whoever is familiar with the subject libiio can answer my question. Thanks a lot.
--
Sent from: http://linux-kernel.2935.n7.nabble.com/
[adding linux-iio mailing list]
Quoted 25 lines · jarul
I would like to ask a question and if anybody can answer my question, I would very much appreciate.
I am using Z706 and AD9361. I have setup the SD card image on the server side and I have a client machine which is a Linux machine. I am using ad9361-iiostream file where I send my data using sin and cos function to DAC and try to get the output from DAC. If I send the random number which does not exceed 2047, do the left shift 4 bit and send the data to DAC. It creates a nice waveform file and the waveform can be seen on oscilloscope clearly. Using random number I can get the output from DAC. However, when I send the sin and cos function, the output from DAC can not be captured or I get just 0 and one single value as output.
I have used
iio_channel_read_rawfunction to capture the output elseiio_channel_readfunction to capture the output from DAC. I want to capture the DAC output and then send the output to ADC and finally I want to capture the ADC output to compare the digital data on both side.Can any export or whoever is familiar with the subject libiio can answer my question. Thanks a lot.
--
Sent from: http://linux-kernel.2935.n7.nabble.com/
Signature · 1 line
~Randy
Same question was also posted on the ADI support forums, we'll discuss it there since this is a ADI product specific question.
See https://ez.analog.com/thread/106116
Quoted 30 lines · Randy Dunlap
[adding linux-iio mailing list]
Quoted 25 lines · jarul
I would like to ask a question and if anybody can answer my question, I would very much appreciate.
I am using Z706 and AD9361. I have setup the SD card image on the server side and I have a client machine which is a Linux machine. I am using ad9361-iiostream file where I send my data using sin and cos function to DAC and try to get the output from DAC. If I send the random number which does not exceed 2047, do the left shift 4 bit and send the data to DAC. It creates a nice waveform file and the waveform can be seen on oscilloscope clearly. Using random number I can get the output from DAC. However, when I send the sin and cos function, the output from DAC can not be captured or I get just 0 and one single value as output.
I have used
iio_channel_read_rawfunction to capture the output elseiio_channel_readfunction to capture the output from DAC. I want to capture the DAC output and then send the output to ADC and finally I want to capture the ADC output to compare the digital data on both side.Can any export or whoever is familiar with the subject libiio can answer my question. Thanks a lot.
--
Sent from: http://linux-kernel.2935.n7.nabble.com/