Skip to contentSkip to conversation

mxc_nand: write problem with i.MX-27L + ST NAND512R3A2DZA6E flash

DISCUSSION Teemu Peltola 1 participant 1 message Jul 1, 2010 1 message not in the archive Memory technology devices (MTD)

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 15264957.5891277991162932.JavaMail.root@hermes

Teemu Peltola

author
#1 lore raw

Hi,

Quoted 11 lines

I have a device based on i.MX-27L and I am updating kernel from 2.6.24 with a custom set of patches to vanilla 2.6.34. I am having problems using mxc_nand driver with ST NAND512R3A2DZA6E flash chip (64MB, 8-bit, 512 byte page size). I am using arch/arm/mach-mx2/mach-mx27ads.c based board file.

The problem is that write operations fail. If I have CONFIG_MTD_NAND_VERIFY_WRITE=y, CONFIG_MTD_DEBUG=y, CONFIG_MTD_DEBUG_VERBOSE=0 enabled in my kernel config and use mtd_pagetest module I see the following output:

Quoted 14 lines

$> modprobe mtd_pagetest dev=4
=================================================
mtd_pagetest: MTD device: 4
mtd_pagetest: MTD device size 1048576, eraseblock size 16384, page size 512, count of eraseblocks 64, pages per eraseblock 32, OOB size 16
mtd_pagetest: scanning for bad eraseblocks
mtd_pagetest: scanned 64 eraseblocks, 0 are bad
mtd_pagetest: erasing whole device
mtd_pagetest: erased 64 eraseblocks
mtd_pagetest: writing whole device
mtd_pagetest: error: write failed at 0x0
mtd_pagetest: error -5 occurred
=================================================

It seems that using CONFIG_MTD_NAND_VERIFY_WRITE option with mxc_nand driver in kernel 2.6.34 causes every MTD write to fail. That is because in nand_base.c, nand_write_page function there is a call to chip->verify_buf(mtd, buf, mtd->writesize), but mxc_nand has registered a function called mxc_nand_verify_buf to it in mxc_nand.c, which always returns -EFAULT, thus failing every mtd_write operation.

I previously had problems when trying to use nandwrite to write JFFS2 root filesystem to NAND partition, but after applying patch "mxc_nand: Fix OOB accesses on i.MX27" (http://lists.infradead.org/pipermail/linux-mtd/2010-May/030366.html) and using nandwrite with -a option, everything works now ok also with 2.6.34.

--
Teemu