openssh: stop adding -D__FILE_OFFSET_BITS=64 to CFLAGS

index 7b6ee5c..7cf34eb 100644
@@ -46,9 +46,6 @@ SYSTEMD_SERVICE_${PN}-sshd = "sshd.socket"
 
 inherit autotools-brokensep ptest
 
-# LFS support:
-CFLAGS += "-D__FILE_OFFSET_BITS=64"
-
 EXTRA_AUTORECONF += "--exclude=aclocal"
 
 # login path is hardcoded in sshd

index 7cf34eb..0459782 100644
@@ -61,17 +61,9 @@ EXTRA_OECONF = "'LOGIN_PROGRAM=${base_bindir}/login' \
 # musl doesn't implement wtmp/utmp
 EXTRA_OECONF_append_libc-musl = " --disable-wtmp"
 
-# Since we do not depend on libbsd, we do not want configure to use it
-# just because it finds libutil.h.  But, specifying --disable-libutil
-# causes compile errors, so...
-CACHED_CONFIGUREVARS += "ac_cv_header_bsd_libutil_h=no ac_cv_header_libutil_h=no"
-
 # passwd path is hardcoded in sshd
 CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd"
 
-# We don't want to depend on libblockfile
-CACHED_CONFIGUREVARS += "ac_cv_header_maillock_h=no"
-
 do_configure_prepend () {
 	export LD="${CC}"
 	install -m 0644 ${WORKDIR}/sshd_config ${B}/

index 0459782..e4feeca 100644
@@ -145,7 +145,6 @@ RPROVIDES_${PN}-sshd = "sshd"
 
 RCONFLICTS_${PN} = "dropbear"
 RCONFLICTS_${PN}-sshd = "dropbear"
-RCONFLICTS_${PN}-keygen = "ssh-keygen"
 
 CONFFILES_${PN}-sshd = "${sysconfdir}/ssh/sshd_config"
 CONFFILES_${PN}-ssh = "${sysconfdir}/ssh/ssh_config"

index 34ba0f8..8887e3a 100644
@@ -36,7 +36,7 @@ check_privsep_dir() {
 }
 
 check_config() {
-	/usr/sbin/sshd -t $SSHD_OPTS || exit 1
+    /usr/sbin/sshd $SSHD_OPTS -t || exit 1
 }
 
 export PATH="${PATH:+$PATH:}/usr/sbin:/sbin"

@@ -48,19 +48,19 @@ case "$1" in
 	@LIBEXECDIR@/sshd_check_keys
 	check_privsep_dir
 	start-stop-daemon -S -p $PIDFILE -x /usr/sbin/sshd -- $SSHD_OPTS
-        echo "done."
+	echo "done."
 	;;
   stop)
-        echo -n "Stopping OpenBSD Secure Shell server: sshd"
+	echo -n "Stopping OpenBSD Secure Shell server: sshd"
 	start-stop-daemon -K -p $PIDFILE -x /usr/sbin/sshd
-        echo "."
+	echo "."
 	;;
 
   reload|force-reload)
 	check_for_no_start
 	@LIBEXECDIR@/sshd_check_keys
 	check_config
-        echo -n "Reloading OpenBSD Secure Shell server's configuration"
+	echo -n "Reloading OpenBSD Secure Shell server's configuration"
 	start-stop-daemon -K -p $PIDFILE -s 1 -x /usr/sbin/sshd
 	echo "."
 	;;

@@ -68,7 +68,7 @@ case "$1" in
   restart)
 	@LIBEXECDIR@/sshd_check_keys
 	check_config
-        echo -n "Restarting OpenBSD Secure Shell server: sshd"
+	echo -n "Restarting OpenBSD Secure Shell server: sshd"
 	start-stop-daemon -K -p $PIDFILE --oknodo -x /usr/sbin/sshd
 	check_for_no_start
 	check_privsep_dir

index 9e91915..e0d0238 100644
@@ -1,4 +1,4 @@
-#	$OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $
+#	$OpenBSD: ssh_config,v 1.33 2017/05/07 23:12:57 djm Exp $
 
 # This is the ssh client system-wide configuration file.  See
 # ssh_config(5) for more information.  This file provides defaults for

@@ -31,14 +31,14 @@ Host *
 #   AddressFamily any
 #   ConnectTimeout 0
 #   StrictHostKeyChecking ask
-#   IdentityFile ~/.ssh/identity
 #   IdentityFile ~/.ssh/id_rsa
 #   IdentityFile ~/.ssh/id_dsa
+#   IdentityFile ~/.ssh/id_ecdsa
+#   IdentityFile ~/.ssh/id_ed25519
 #   Port 22
-#   Protocol 2,1
-#   Cipher 3des
-#   Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
-#   MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
+#   Protocol 2
+#   Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc
+#   MACs hmac-md5,hmac-sha1,[email protected]
 #   EscapeChar ~
 #   Tunnel no
 #   TunnelDevice any:any

index b7c3ccd..15f061b 100644
@@ -1,4 +1,4 @@
-#	$OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $
+#	$OpenBSD: sshd_config,v 1.102 2018/02/16 02:32:40 djm Exp $
 
 # This is the sshd server system-wide configuration file.  See
 # sshd_config(5) for more information.

@@ -7,7 +7,7 @@
 
 # The strategy used for options in the default sshd_config shipped with
 # OpenSSH is to specify options with their default value where
-# possible, but leave them commented.  Uncommented options change a
+# possible, but leave them commented.  Uncommented options override the
 # default value.
 
 #Port 22

@@ -15,42 +15,30 @@
 #ListenAddress 0.0.0.0
 #ListenAddress ::
 
-# The default requires explicit activation of protocol 1
-Protocol 2
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
 #HostKey /etc/ssh/ssh_host_rsa_key
 #HostKey /etc/ssh/ssh_host_ecdsa_key
 #HostKey /etc/ssh/ssh_host_ed25519_key
 
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 1024
-
 # Ciphers and keying
 #RekeyLimit default none
 
 # Logging
-# obsoletes QuietMode and FascistLogging
 #SyslogFacility AUTH
 #LogLevel INFO
 
 # Authentication:
 
 #LoginGraceTime 2m
-#PermitRootLogin yes
+#PermitRootLogin prohibit-password
 #StrictModes yes
 #MaxAuthTries 6
 #MaxSessions 10
 
-#RSAAuthentication yes
 #PubkeyAuthentication yes
 
 # The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
 # but this is overridden so installations will only check .ssh/authorized_keys
-AuthorizedKeysFile .ssh/authorized_keys
+AuthorizedKeysFile	.ssh/authorized_keys
 
 #AuthorizedPrincipalsFile none
 

@@ -58,11 +46,9 @@ AuthorizedKeysFile .ssh/authorized_keys
 #AuthorizedKeysCommandUser nobody
 
 # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
 #HostbasedAuthentication no
 # Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
+# HostbasedAuthentication
 #IgnoreUserKnownHosts no
 # Don't read the user's ~/.rhosts and ~/.shosts files
 #IgnoreRhosts yes

@@ -71,7 +57,8 @@ AuthorizedKeysFile .ssh/authorized_keys
 #PasswordAuthentication yes
 #PermitEmptyPasswords no
 
-# Change to no to disable s/key passwords
+# Change to yes to enable challenge-response passwords (beware issues with
+# some PAM modules and threads)
 ChallengeResponseAuthentication no
 
 # Kerberos options

@@ -110,7 +97,7 @@ ChallengeResponseAuthentication no
 Compression no
 ClientAliveInterval 15
 ClientAliveCountMax 4
-#UseDNS yes
+#UseDNS no
 #PidFile /var/run/sshd.pid
 #MaxStartups 10:30:100
 #PermitTunnel no

index be2e2ec..1931dc7 100644
@@ -56,27 +56,23 @@ while true ; do
     esac
 done
 
-# parse location of keys
-HOST_KEY_RSA=$(grep ^HostKey "${sshd_config}" | grep _rsa_ | tail -1 | awk ' { print $2 } ')
-[ -z "${HOST_KEY_RSA}" ] && HOST_KEY_RSA=$(grep HostKey "${sshd_config}" | grep _rsa_ | tail -1 | awk ' { print $2 } ')
-[ -z "${HOST_KEY_RSA}" ] && HOST_KEY_RSA=$SYSCONFDIR/ssh_host_rsa_key
-HOST_KEY_ECDSA=$(grep ^HostKey "${sshd_config}" | grep _ecdsa_ | tail -1 | awk ' { print $2 } ')
-[ -z "${HOST_KEY_ECDSA}" ] && HOST_KEY_ECDSA=$(grep HostKey "${sshd_config}" | grep _ecdsa_ | tail -1 | awk ' { print $2 } ')
-[ -z "${HOST_KEY_ECDSA}" ] && HOST_KEY_ECDSA=$SYSCONFDIR/ssh_host_ecdsa_key
-HOST_KEY_ED25519=$(grep ^HostKey "${sshd_config}" | grep _ed25519_ | tail -1 | awk ' { print $2 } ')
-[ -z "${HOST_KEY_ED25519}" ] && HOST_KEY_ED25519=$(grep HostKey "${sshd_config}" | grep _ed25519_ | tail -1 | awk ' { print $2 } ')
-[ -z "${HOST_KEY_ED25519}" ] && HOST_KEY_ED25519=$SYSCONFDIR/ssh_host_ed25519_key
+HOST_KEYS=$(sed -n 's/^[ \t]*HostKey[ \t]\+\(.*\)/\1/p' "${sshd_config}")
+[ -z "${HOST_KEYS}" ] && HOST_KEYS="$SYSCONFDIR/ssh_host_rsa_key $SYSCONFDIR/ssh_host_ecdsa_key $SYSCONFDIR/ssh_host_ed25519_key"
 
-# create keys if necessary
-if [ ! -f $HOST_KEY_RSA ]; then
-    echo "  generating ssh RSA key..."
-    generate_key $HOST_KEY_RSA rsa
-fi
-if [ ! -f $HOST_KEY_ECDSA ]; then
-    echo "  generating ssh ECDSA key..."
-    generate_key $HOST_KEY_ECDSA ecdsa
-fi
-if [ ! -f $HOST_KEY_ED25519 ]; then
-    echo "  generating ssh ED25519 key..."
-    generate_key $HOST_KEY_ED25519 ed25519
-fi
+for key in ${HOST_KEYS} ; do
+    [ -f $key ] && continue
+    case $key in
+    *_rsa_key)
+        echo "  generating ssh RSA host key..."
+        generate_key $key rsa
+        ;;
+    *_ecdsa_key)
+        echo "  generating ssh ECDSA host key..."
+        generate_key $key ecdsa
+        ;;
+    *_ed25519_key)
+        echo "  generating ssh ED25519 host key..."
+        generate_key $key ed25519
+        ;;
+    esac
+done

index 221869e..9d4d95e 100644
@@ -36,11 +36,6 @@ ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("DISTRO_FEATURES", "systemd"
 
 ROOTFS_POSTPROCESS_COMMAND += 'empty_var_volatile;'
 
-# Disable DNS lookups, the SSH_DISABLE_DNS_LOOKUP can be overridden to allow
-# distros to choose not to take this change
-SSH_DISABLE_DNS_LOOKUP ?= " ssh_disable_dns_lookup ; "
-ROOTFS_POSTPROCESS_COMMAND_append_qemuall = "${SSH_DISABLE_DNS_LOOKUP}"
-
 # Sort the user and group entries in /etc by ID in order to make the content
 # deterministic. Package installs are not deterministic, causing the ordering
 # of entries to change between builds. In case that this isn't desired,

@@ -171,12 +166,6 @@ ssh_allow_empty_password () {
 	fi
 }
 
-ssh_disable_dns_lookup () {
-	if [ -e ${IMAGE_ROOTFS}${sysconfdir}/ssh/sshd_config ]; then
-		sed -i -e 's:#UseDNS yes:UseDNS no:' ${IMAGE_ROOTFS}${sysconfdir}/ssh/sshd_config
-	fi
-}
-
 python sort_passwd () {
     import rootfspostcommands
     rootfspostcommands.sort_passwd(d.expand('${IMAGE_ROOTFS}${sysconfdir}'))