Skip to contentSkip to conversation

Patch "spi: bcm2835aux: ensure interrupts are enabled for shared handler" has been added to the 4.14-stable tree

PATCH gregkh at linuxfoundation.org 1 participant 1 message Jun 17, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

This is a note to let you know that I've just added the patch titled

spi: bcm2835aux: ensure interrupts are enabled for shared handler

to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
spi-bcm2835aux-ensure-interrupts-are-enabled-for-shared-handler.patch
and it can be found in the queue-4.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

Quoted 1 line

From foo at baz Sun Jun 17 12:13:49 CEST 2018

From: Rob Herring <[email protected]>
Date: Thu, 3 May 2018 13:09:44 -0500
Subject: spi: bcm2835aux: ensure interrupts are enabled for shared handler

From: Rob Herring <[email protected]>

[ Upstream commit bc519d9574618e47a0c788000fb78da95e18d953 ]

The BCM2835 AUX SPI has a shared interrupt line (with AUX UART). Downstream fixes this with an AUX irqchip to demux the IRQ sources and a DT change which breaks compatibility with older kernels. The AUX irqchip was already rejected for upstream[1] and the DT change would break working systems if the DTB is updated to a newer one. The latter issue was brought to my attention by Alex Graf.

The root cause however is a bug in the shared handler. Shared handlers must check that interrupts are actually enabled before servicing the interrupt. Add a check that the TXEMPTY or IDLE interrupts are enabled.

[1] https://patchwork.kernel.org/patch/9781221/

Cc Alexander Graf <[email protected]>
Cc Marc Zyngier <[email protected]>
Cc Mark Brown <[email protected]>
Cc Eric Anholt <[email protected]>
Cc Stefan Wahren <[email protected]>
Cc Florian Fainelli <[email protected]>
Cc Ray Jui <[email protected]>
Cc Scott Branden <[email protected]>
Cc bcm-kernel-feedback-list at broadcom.com
Cc linux-spi at vger.kernel.org
Cc linux-rpi-kernel at lists.infradead.org
Cc linux-arm-kernel at lists.infradead.org
---
 drivers/spi/spi-bcm2835aux.c |    5 +++++
 1 file changed, 5 insertions(+)
drivers/spi/spi-bcm2835aux.c +5 -0
@@ -184,6 +184,11 @@ static irqreturn_t bcm2835aux_spi_interr
 	struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
 	irqreturn_t ret = IRQ_NONE;
 
+	/* IRQ may be shared, so return if our interrupts are disabled */
+	if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
+	      (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
+		return ret;
+
 	/* check if we have data to read */
 	while (bs->rx_len &&
 	       (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &

Patches currently in stable-queue which might be from robh at kernel.org are

queue-4.14/spi-bcm2835aux-ensure-interrupts-are-enabled-for-shared-handler.patch queue-4.14/dt-bindings-panel-lvds-fix-path-to-display-timing-bindings.patch queue-4.14/dt-bindings-pinctrl-sunxi-fix-reference-to-driver.patch queue-4.14/dt-bindings-serial-sh-sci-add-support-for-r8a77965-h-scif.patch queue-4.14/doc-add-vendor-prefix-for-kieback-peter-gmbh.patch queue-4.14/dt-bindings-dmaengine-rcar-dmac-document-r8a77965-support.patch